magonzalez112 Posted April 3, 2014 Share Posted April 3, 2014 (edited) The build: -Motherboard: GA-X79-UP4 -CPU: Intel Core i7 4820K 3,7Ghz Stock core (4,2 OC, it can go to 4,6 arriving 5,2 turbo frequency without temps problems using air cooling) -Memory: G-Skill 1600Mhz CL7 (OC 2400Mhz) 8Gb --> 32Gb (soon) -GPU: GTX 560 (Non-ti) -Drives: SSD Kingston 3K 256Gb (MAC OS) SSD Kingston v500 128Gb (Windows) HDD Seagate 2Tb (Data) -Wifi: Ebay airport extreme PCI-e x1 card (native working) -How to install: -Create an usb MAC OS installer (nothing special) 10.9.2 -Boot into the installer using these flags; -x -v -f npci=0x2000 PCIRootUID=0 GraphicsEnabler=yes cpus=1 (Booting into the installer it´s slow, wait some minutes) -Install as ever we have made. -Then reboot and boot using usb installer, but this time boot into drive you have installed mac os, using the same flags; -x -v -f npci=0x2000 PCIRootUID=0 GraphicsEnabler=yes cpus=1 -Finish configuration, create user.... -Post-install: -What we need: -Go to Rampage Dev Blog and download X79.dmg http://rampagedev.wordpress.com/dsdt-downloads/gigabyte-x79/ -Download last chameleon release -How to: -Now install chameleon -This is my chameleon boot config: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EthernetBuiltIn</key> <string>Yes</string> <key>Graphics Mode</key> <string>"1920x1080x32"</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>npci=0x2000 darkwake=0</string> <key>KeyLayout</key> <string>mac-es</string> <key>SSDT</key> <string>Yes</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>Yes</string> </dict> </plist> -Well, now open x79.dmg and copy to your extra folder SSDT, SSDT-1 and DSDT, also put into modules folder FileNVRAM.dilyb, and you will need too in extra/extensions put VodooTSCsync.kext NullCPUPowerManagement.kext FakeSMC.kext -Now, use the forum search feature to find and install; -Audio: ALC892 with dsdt -Network: RTL81XX -Misc: TRIM enabler, VodooTSCSyc (4 Core) and FakeSMC That´s all. -Notes: Stepping is working properly but non turbo-boost, also sleep works but fans keep running (NullCPUPM i think), and ALC892 crackles using chrome, garageband and logic pro (i wanted it for audio mastering, i hope this will be solved soon in next releases). I can´t pass 4,2Ghz in mac os, so i get around 16000 geekbench, and turbo does no work, but using windows 4.6Ghz -->5,2Ghz(turbo) i hit 19000 geekbench points. ------------------------------- PD: Sorry for my bad english, i am spanish, and good luck with your builds. Edited April 12, 2014 by fantomas1 Post edited! We don't support tonymacx86 tools! Link to comment Share on other sites More sharing options...
mr_DrUm Posted May 22, 2014 Share Posted May 22, 2014 Hallo! It's REALLY worked? I have the same MB, but CPU Intel Core i7-4930K, 3.40ГГц I have long been using the loader Clover, and had forgotten Chameleon.... When the system boots, you used DSDT? Where can I get the corrected DSDT? Or you only have SSDT from rampagedev? Thank you! Link to comment Share on other sites More sharing options...
magonzalez112 Posted December 18, 2014 Author Share Posted December 18, 2014 Just RampageDev 1 Link to comment Share on other sites More sharing options...
Recommended Posts