need help for finish installation on samsung NP 900 x3C

[superlightman]

Hello

I have a Samsung NP 900 X3C A-01

Processor [X4C]     : Intel® Core™ i5-3337U Processor (3M Cache, up to 2.70 GHz)
Processor [X3C]      : Intel® Core™ i7-3517U Processor (3M Cache, up to 3.00 GHz)
Graphics Processor(GPU) : Intel® HD Graphics 4000
Chipset                 : Intel® HM75 Express Chipset
Hard disk               : Samsung 128GB SSD
RAM                     : 4GB DDR3 16000MHZ (X3C) / 8GB DDR3 1600MHZ (X4C)
Wifi                    : Intel Centrino Advanced-N 6235 WiFi Adapter
Bluetooth               : Intel Centrino Advanced-N 6235 Integrated Bluetooth 4.0
Ethernet                : Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
Audio                   : Realtek® High Definition Audio ALC269VC
USB 3.0                 : Renesas uPD720202 USB 3.0 Host Controller
Touchpad                : Elan Touchpad v4 Hardware
Webcam                  : Webcam SC-13HDL11624N 1.3MP
Card reader             : Realtek USB2.0 card reader
Monitor                 : 13.3 LED HD+ 1600x900
Optical Drive           : None
Battery                 : 4Cells 54 Whrs (X3C) / 8Cells 62 Whrs(X4C)
Interface :
1 x Microphone/Headphone combo jack 
1 x VGA Mini
1 x USB 2.0 port(s)
1 x USB 3.0 port(s)
1 x RJ45 LAN Jack for LAN insert 
1 x HDMI

Bios PO6AAC

i have format all my disk

Then i runed [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

I did the installation.

After the installation i could enter in the Os X mavericks, the keyboard, trackpad, and the ethernet connection was working, just the wifi i not see it.



Then i run edp, i have update it, and then i have install in it the extra folder that is from samsung NP 900 X3C zip / extra that i have found on the osxlatitude web side.

I could run all the extensions and DST.

Then i have install the chimera v2,2,1 from the [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

And then i have restart my comptuter.

But this time my keyboard and trackpad was not recognized and the ethernet connection don't work too

Only bluetooth was working and i could connect to internet only with bluetooth .I can go only to internet if share the bluetooth connection network from my phone.

What can i do?

Now i have formated again my samsung NP 900 x3c computer and install again the OS from [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url].

Can somebody tell me exactly what i have to install this time that it work? i have to use edp?[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]?the samsung zip?

Please help me...

[superlightman]

Finally i could make everything working but not the wifi , you have a solution?

[fallen101]

Unfortunately the intel centrino WIFI cards do not have any Kexts enabling them to work.
You can use Ethernet for internet connectivity, buy a WIFI usb that works on Mac, or lastly you can buy a new wireless card for your Laptop and replace it. 
The last one is probably your best route of going. If you would like to have bluetooth support you will need to buy a Combo card, or a USB Bluetooth dongle. Replacing your mPCI card is usually really simple. 

[superlightman]

ok thanks

[angelo108]

hi, I am new in this forum and  I have the NP 900X3C with i5 cpu

 

I am quite ignorant on installation and fixing problem but I would like to try to install OS X on an USB flash drive and try the OS X.

even if not work everything is fine just to explore the thing. 

 

anybody can help me ? like giving me a link where I can download a file and the instruction to format the usb drive with all necessary in it?

 

thanks in advance