lol123 Posted March 14, 2014 Share Posted March 14, 2014 I've already created the os x 10.9 installer but when i try to boot it it doesn't boots (already configured bios). I set the bios to but from usb and it boots windows instead of the usb. Can someoen help me? I created the installer with myhack. Link to comment Share on other sites More sharing options...
Laberlohe Posted March 14, 2014 Share Posted March 14, 2014 Hello and welcome! Some information about your hardware maybe helpful, especially mother board, cpu, and graphics card... Depending on your mother board I'd try to press F12 while the POST - at least on Gigabyte mobo this will give you a list of boot devices. Maybe you will have to switch from UEFI mode to legacy/mixed/BIOS mode. Depending on your hardware are also other things possible. Good luck! Link to comment Share on other sites More sharing options...
lol123 Posted March 14, 2014 Author Share Posted March 14, 2014 I have an all in one, gpu hd radeon 5450, AMD Athlon II X2 235e 2.7 processor. I have already tried booting the usb with boot menu (f12). My AIO is lenovo. PS: Im trying to isntall windows and os x on one hd. (Only need os x for xcode) Link to comment Share on other sites More sharing options...
lol123 Posted March 14, 2014 Author Share Posted March 14, 2014 Someoen help me please Link to comment Share on other sites More sharing options...
Laberlohe Posted March 14, 2014 Share Posted March 14, 2014 Did you swap the mach_kernel for a patched one? AMD cpu won't work with the stock/vanilla kernel that comes with myHack. Link to comment Share on other sites More sharing options...
lol123 Posted March 15, 2014 Author Share Posted March 15, 2014 Yes, I've done that. And also replaced system.kext into s/l/e Link to comment Share on other sites More sharing options...
Recommended Posts