Jump to content

AmdCPUMonitor and HWSensors 3.3.1


Slice
 Share

110 posts in this topic

Recommended Posts

I made new kext as an addition to HWSensors v3.3.

Compatibility with OS 10.6 - 10.10

Currently it show only CPU temperature. May be later I make voltage and frequencies. Voluntaries welcomed.

 

I am not sure with kozlek's project compatibility. Test with precations.

(kozlek's version is not newer. It is a branch with own enumeration)

 

Manual testing without installation:

sudo -s
chown -R root:wheel ~/Downloads/AmdCPUMonitor.kext
chmod -R 755 ~/Downloads/AmdCPUMonitor.kext
kextutil -v ~/Downloads/AmdCPUMonitor.kext

This kext v1.0 attachicon.gifAmdCPUMonitor.kext.zip

Other files in the project (don't install all of them! For example you don't need IntelCPUMonitor)

attachicon.gifFakeSMC_plugins_746.zip

 

New FakeSMC with Illumination version in System Profiler and no warnings in kernel.log

attachicon.gifFakeSMC.kext_Illumination.zip

Minimum set includes FakeSMC+HWInfo

 

 

Recommended installation (I have no installer so I propose you will use Terminal.app)

sudo -s
cp -r -v ~/Downloads/HWSensors/AmdCPUMonitor.kext /System/Library/Extensions/

and so on for all kexts that will have a sense for you

ACPIMonitor.kext     - for devices in DSDT. Only for advanced users!
AmdCPUMonitor.kext   - temperature for AMD CPU
Andigilog.kext       - for andigilog chip. Found on some Intel motherboard
AnalogDevices.kext   - for chips like ADT7470-7475
F718x.kext           - for Fintek chip
FakeSMC.kext         - obligatory for any Hackintosh
GeforceSensor.kext   - for new NVidia Geforce cards
HWInfo.kext          - if you use Clover bootloader
ICHSMBus.kext        - an addition for Andigilog.kext
IntelCPUMonitor.kext - temperature, voltage and frequencies for Intel CPU up to Haswell
ITEIT87x.kext        - for ITE chip, found on most Gigabyte motherboards
NuvotonNCT677x.kext  - for Nuvotone chip, found on new ASUS motherboards
NVClockX.kext        - for old NVidia cards
PC8739x.kext         - for NSC chip, found on Dell Inspiron only
RadeonMonitor.kext   - for Radeon videocard HD4000+
W836x.kext           - for Winbond chips found on old ASUS motherboards
X3100.kext           - for Intel X3100 (GM965 chip) 

Monitor application to be used

attachicon.gifHWMonitor.app_731.zip

 

New version andigilog.kext supports EMC6D103 chip.

 

 

Advantages: 

- no spam in system.log

- CPU usage only 0.1%

- no panics

- supported wide range of chips.

 

Sources are available here

https://www.assembla.com/code/fakesmc/subversion/nodes/738/HWSensors

Hey can u re upload all the files u shared here, I am not able to download from here for some reason,. Thanks

Link to comment
Share on other sites

So I tried to install it but installation fails due to some error. But I can still see new HWMonitorSMC app installed. But it show only Hard disk temp nothing else. More over Now I have started to freez during restart and my external hdd is now being recognized as Read Only.

How do I uninstall it now?

Link to comment
Share on other sites

  • 3 weeks later...

the link does not work

 

I made new kext as an addition to HWSensors v3.3.

Compatibility with OS 10.6 - 10.10

Currently it show only CPU temperature. May be later I make voltage and frequencies. Voluntaries welcomed.

 

I am not sure with kozlek's project compatibility. Test with precations.

(kozlek's version is not newer. It is a branch with own enumeration)

 

Manual testing without installation:

sudo -s
chown -R root:wheel ~/Downloads/AmdCPUMonitor.kext
chmod -R 755 ~/Downloads/AmdCPUMonitor.kext
kextutil -v ~/Downloads/AmdCPUMonitor.kext

This kext v1.0 attachicon.gifAmdCPUMonitor.kext.zip

Other files in the project (don't install all of them! For example you don't need IntelCPUMonitor)

attachicon.gifFakeSMC_plugins_746.zip

 

New FakeSMC with Illumination version in System Profiler and no warnings in kernel.log

attachicon.gifFakeSMC.kext_Illumination.zip

Minimum set includes FakeSMC+HWInfo

 

 

Recommended installation (I have no installer so I propose you will use Terminal.app)

sudo -s
cp -r -v ~/Downloads/HWSensors/AmdCPUMonitor.kext /System/Library/Extensions/

and so on for all kexts that will have a sense for you

ACPIMonitor.kext     - for devices in DSDT. Only for advanced users!
AmdCPUMonitor.kext   - temperature for AMD CPU
Andigilog.kext       - for andigilog chip. Found on some Intel motherboard
AnalogDevices.kext   - for chips like ADT7470-7475
F718x.kext           - for Fintek chip
FakeSMC.kext         - obligatory for any Hackintosh
GeforceSensor.kext   - for new NVidia Geforce cards
HWInfo.kext          - if you use Clover bootloader
ICHSMBus.kext        - an addition for Andigilog.kext
IntelCPUMonitor.kext - temperature, voltage and frequencies for Intel CPU up to Haswell
ITEIT87x.kext        - for ITE chip, found on most Gigabyte motherboards
NuvotonNCT677x.kext  - for Nuvotone chip, found on new ASUS motherboards
NVClockX.kext        - for old NVidia cards
PC8739x.kext         - for NSC chip, found on Dell Inspiron only
RadeonMonitor.kext   - for Radeon videocard HD4000+
W836x.kext           - for Winbond chips found on old ASUS motherboards
X3100.kext           - for Intel X3100 (GM965 chip) 

Monitor application to be used

attachicon.gifHWMonitor.app_731.zip

 

New version andigilog.kext supports EMC6D103 chip.

 

 

Advantages: 

- no spam in system.log

- CPU usage only 0.1%

- no panics

- supported wide range of chips.

 

Sources are available here

https://www.assembla.com/code/fakesmc/subversion/nodes/738/HWSensors

Link to comment
Share on other sites

  • 4 months later...

:)

 

but temperature is false :D

 

Same thing...

 

This is my speedfan log from windows:

Win9x:NO  64Bit:YES  GiveIO:NO  SpeedFan:YESI/O properly initialized
Linked ISA BUS at $0290
Linked ATI SBx00 SMBUS at $0B00
Linked ISA BUS at $0CCB
SB7xx/8xx PM2 found on ISA at $CCB
Found nVidia GeForce GT 610
Linked nVidiaI2C0 SMBUS at $3D403E3F
Linked nVidiaI2C1 SMBUS at $3D403637
Linked nVidiaI2C2 SMBUS at $3D405051
Scanning ISA BUS at $0290...
IT8712F(J) found on ISA at $290
Scanning AtiIgp SMBus at $0B00...
Scanning ISA BUS at $0CCB...
Scanning I2CNVidia SMBus at $3D403E3F...
Scanning I2CNVidia SMBus at $3D403637...
Scanning I2CNVidia SMBus at $3D405051...
Found Hitachi HTS543232A7A384 on AdvSMART
Found WDC WD5000AAKX-083CA1 on AdvSMART
ATK0110 (MB=M5A78L-M-LX3) found on ACPI
End of detection

 

Used these kexts:

 

ACPIMonitor.kext - for devices in DSDT. Only for advanced users!

AmdCPUMonitor.kext - temperature for AMD CPU

Andigilog.kext - for andigilog chip. Found on some Intel motherboard

AnalogDevices.kext - for chips like ADT7470-7475

F718x.kext - for Fintek chip

FakeSMC.kext - obligatory for any Hackintosh

GeforceSensor.kext - for new NVidia Geforce cards

HWInfo.kext - if you use Clover bootloader

ICHSMBus.kext - an addition for Andigilog.kext

IntelCPUMonitor.kext - temperature, voltage and frequencies for Intel CPU up to Haswell

ITEIT87x.kext - for ITE chip, found on most Gigabyte motherboards

NuvotonNCT677x.kext - for Nuvotone chip, found on new ASUS motherboards

NVClockX.kext - for old NVidia cards

PC8739x.kext - for NSC chip, found on Dell Inspiron only

RadeonMonitor.kext - for Radeon videocard HD4000+

W836x.kext - for Winbond chips found on old ASUS motherboards

X3100.kext - for Intel X3100 (GM965 chip) 

 

 

 

It's just a little report. Maybe I should use some other kexts, I'm not sure.

p.s. my hardware you can see at my signature...

post-1484325-0-59148300-1444477422.png

Link to comment
Share on other sites

The drivers that are not suitable for your hardware, you have to remove from Fakesmc.kext/ ... /plugin/ folders. Or add missing drivers in the pluging folder. you need to test.

Link to comment
Share on other sites

The drivers that are not suitable for your hardware, you have to remove from Fakesmc.kext/ ... /plugin/ folders. Or add missing drivers in the pluging folder. you need to test.

 

Ok, I'll try in a free time.)

  • Like 1
Link to comment
Share on other sites

Alright I've tried - same result, I had even delete all drivers and left only fakesmc.kext and amdcpumonitor.kext in Contents/Plugins.

edit: I think it's not compatible with my type of CPU, the driver should be updated for compatibility. But it's ok, for now will be enough GPU sensor.

Link to comment
Share on other sites

 Share

×
×
  • Create New...