netchamp.faris Posted February 2, 2014 Share Posted February 2, 2014 I am a newbie to Hackintosh. My config is: i3-4130 Gigabyte H81M-S1 XFX Radeon HD6670 1GB GDDR5 I did a bit of googling, it seems like IGP HD4400 has some problems with Hackintosh. My questions is there a way to get it work? Or Is there a way I can use my HD6670, is it compatible? I am totally new, Advice. Quote Link to comment Share on other sites More sharing options...
Laberlohe Posted February 2, 2014 Share Posted February 2, 2014 Hello and welcome! HD4400 will work like HD4600 - same core but lower clock speeds. But there is a limiting factor: your mobo. It features just a D-Sub (vga) port and analog output isn't supported on Mavericks. To bypath this you would have to use a dedicated graphics card - a HD6670 would be great because it drains just a little power (no additional connectors needed) and it's working out of the box. I'd also advise a glimpse inside the osx86 wiki (linked in the header of this site) - you will find a very helpful Hardware Compatibilty List there ;-) Good luck! 1 Quote Link to comment Share on other sites More sharing options...
netchamp.faris Posted February 2, 2014 Author Share Posted February 2, 2014 Thank you very much Quote Link to comment Share on other sites More sharing options...
netchamp.faris Posted March 17, 2014 Author Share Posted March 17, 2014 OK, I am now using the HD 6670 with a HDMI connector. There are a lot of guides for installing Mavericks, can you help me finding the appropriate one for my config? Also, I want to dual boot windows and hackintosh Quote Link to comment Share on other sites More sharing options...
naonweh Posted March 18, 2014 Share Posted March 18, 2014 Hello and welcome! HD4400 will work like HD4600 - same core but lower clock speeds. But there is a limiting factor: your mobo. It features just a D-Sub (vga) port and analog output isn't supported on Mavericks. To bypath this you would have to use a dedicated graphics card - a HD6670 would be great because it drains just a little power (no additional connectors needed) and it's working out of the box. I'd also advise a glimpse inside the osx86 wiki (linked in the header of this site) - you will find a very helpful Hardware Compatibilty List there ;-) Good luck! Hi, how to get hd4400 work? I can't get it to worked Quote Link to comment Share on other sites More sharing options...
iFIRE Posted March 18, 2014 Share Posted March 18, 2014 take a look here [ NooBs Guide ] How to install OS X Mavericks from scratch in progress - Tutorials (The Genius Bar) - InsanelyMac Forum 1 Quote Link to comment Share on other sites More sharing options...
naonweh Posted March 26, 2014 Share Posted March 26, 2014 take a look here [ NooBs Guide ] How to install OS X Mavericks from scratch in progress - Tutorials (The Genius Bar) - InsanelyMac Forum I sucessfully install 10.9 but the graphic isn't enabled (HD 4400 with dev id 041e). I see this dev id not supported by AzulFB and caused flickering on the screen. how to enabled it? Quote Link to comment Share on other sites More sharing options...
Qcraft Posted May 23, 2015 Share Posted May 23, 2015 I am new to hackintosh and my specs are: GIGABYTE H97M-D3H INTEL® CORE™ I3-4170 Haswell Seagate Barracuda 1TB 7200RPM Apex DM-317 G.SKILL Ripjaws F3-12800CL9D-4GBRL Will it work with OSX Yosemite thanks Quote Link to comment Share on other sites More sharing options...
Allan Posted May 24, 2015 Share Posted May 24, 2015 I am new to hackintosh and my specs are:GIGABYTE H97M-D3H INTEL® CORE™ I3-4170 Haswell Seagate Barracuda 1TB 7200RPM Apex DM-317 G.SKILL Ripjaws F3-12800CL9D-4GBRL Will it work with OSX Yosemite thanks You need help? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.