Jump to content

Asus Z9PE-D8 WS Issues


sunset1430
 Share

9 posts in this topic

Recommended Posts

Greetings

I am having issues with a Asus Z9PE-D8. I have followed instructions from multiple sources. 

I have removed all third party items. 

 

The system consists of Asus Z9PE-D8 with two Intel Xeon 2660 CPUs.

I have an Apple firmware Radeon card from a MacPro. I also have an Nvidia GTX560 Ti around if needed. But both have given me similar issues. 

I have a serial ATA drive.

 

I have done the usuall troubleshooting npci=0x2000 0x3000 rootID etc. I have tried pretty much everything on chamelon wizard, etc.

I always seem to get stuck at PCI Configuration begin or a white screen. I did a Mountain Lion to boot once but only worked with remote desktop. 

 

I have installed the OS using a Mac, then run post installer such as pandora on that disk. I have tried pandora [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] etc. I can't seem to find the right combo of settings. Any insight would be greatly appreciated. 

Link to comment
Share on other sites

hi

could you try with iopcifamily rollback... https://www.dropbox.com/sh/0gkfi2i4cnb12n3/s8mhusnwAI

at e/e or s/l/e..just to see Iread some clues about this..but try to see what comes before the"pci configurati....    "

 

 

" I did a Mountain Lion to boot once but only worked with remote desktop. "...how ?

c.frio

Link to comment
Share on other sites

I can work through this. With mountain lion 10.8.3 I got it to boot with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. But no video. I could remote desktop into the machine as the system had remote management enabled. I don't remember my settings though. I looked at this thread recently but cannot recreate like he did. http://www.insanelymac.com/forum/topic/295055-asus-z9pe-ws-d8-mavericks-working-1091/

 

Do you guys have any ideas how I should configure for first run. I am little concerned this has to do with the speed stepping tech on the motherboard.

 

 -v cpus=1 npci=0x2000 did not work. Stops at PCI configuration begin. then shuts down. 

 

before shutdown ACPI: sleep states S3 S4 S5

pci (build 22:16:20 sep 19) , flags 0x600008 pmf64 (44 cpu) 0xfff800000000000 etc

 

If i use onboard VGA it boots al the way to missing bluetooth etc.

Link to comment
Share on other sites

How do I replace the kernal? Yeah I can't get Nvidia or ATI to work.


I have 10.9.1 running without the modified kernal...


I have a working system with 10.9.1 and graphics. no power management doh.

 

I will post my exact info by the end of the day. Now i need to dig in and get everything really working. Ethernet etc.

Link to comment
Share on other sites

Ok... you only need the kernel if you use a V2 ivybridge cpu. I dont know how to fix the nvidia card problem either. I can only boot with onboard vga only. If someone knows how to install an ati or nvidia card....

Ok... you only need the kernel if you use a V2 ivybridge cpu. I dont know how to fix the nvidia card problem either. I can only boot with onboard vga only. If someone knows how to install an ati or nvidia card....

Link to comment
Share on other sites

 Share

×
×
  • Create New...