Jump to content

Testers needed: CPU Power Management for SB and IB Xeon(s) or i7-39xx on X79 or C60x chipset


  • Please log in to reply
556 replies to this topic

#541
.::Fabio::.

.::Fabio::.

    InsanelyMac Legend

  • Moderators
  • 7,999 posts
  • Gender:Male
  • Location:Italy

Ciao Fabio,
 
have you an unlocked firmware for your MSI mb? Which  OSX version are you trying?
 
if not, you have to patch with sudo command found in first omni post your AICPUPM kext
Then you have to use another patch to let see your 3930x to OSX (file 03 to download from omni's link )
Then you can generate your ssdt with PikerAlpha script and you should see all pstates with AICPUPMI kext (latest release)

hardware is a good friend of mine
set up Maverick 10.9.3
everything works except the speedstep
for as if firmwae is blocked

Fabio

#542
maximus

maximus

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 112 posts
  • Gender:Male
  • Location:Croatia
  • Interests:Everything IT related, Hi-Fi audio, good books

fabio try http://www.insanelym...tching-utility/

restore vanila AICPM

use clover to patch AICPM kext on the fly

generate SSDT with pike's script it should work.



#543
.::Fabio::.

.::Fabio::.

    InsanelyMac Legend

  • Moderators
  • 7,999 posts
  • Gender:Male
  • Location:Italy

fabio try http://www.insanelym...tching-utility/
restore vanila AICPM
use clover to patch AICPM kext on the fly
generate SSDT with pike's script it should work.

Thank you for your reply
SSDT table generated using Clover patch for AICPM?

Fabio

#544
.::Fabio::.

.::Fabio::.

    InsanelyMac Legend

  • Moderators
  • 7,999 posts
  • Gender:Male
  • Location:Italy
Thank you so much fabiosun for the advice given

Fabio

#545
gorg

gorg

    InsanelyMac Protégé

  • Members
  • Pip
  • 36 posts

Do pokenguyen's commands (based on singa11 patch) work for 10.9.4 ? 



#546
stinga11

stinga11

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 105 posts

Do pokenguyen's commands (based on singa11 patch) work for 10.9.4 ? 

Yes, the patch works with the 10.9.4 AICPM



#547
stinga11

stinga11

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 105 posts

I had not used yosemite from DP1. Today I tested Yosemite DP6 and it works great, but one of the patches for SandyBridge-E has changed. Here I leave the new patch.

sudo perl -pi -e 's|\xFF\x0F\x84\x2D|\xFF\x0F\x85\x2D|g' /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

sudo perl -pi -e 's|\x3E\x75\x39|\x3E\x90\x90|g' /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

sudo perl -pi -e 's|\x01\x00\x01\x0F\x84|\x01\x00\x01\x0F\x85|g' /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

sudo perl -pi -e 's|\x74\x11\xB9|\xEB\x11\xB9|g' /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

sudo perl -pi -e 's|\x02\x74\x0B\x41\x83\xFC\x03\x75\x22\xB9\x02\x06|\x02\xEB\x0B\x41\x83\xFC\x03\x75\x22\xB9\x02\x06|g' /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

sudo perl -pi -e 's|\x74\x0B\x41\x83\xFC\x03\x75\x11\xB9\x42\x06\x00|\xEB\x0B\x41\x83\xFC\x03\x75\x11\xB9\x42\x06\x00|g' /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

sudo perl -pi -e 's|\x01\x74\x56|\x01\xEB\x56|g' /System/Library/Extensions/AppleIntelCPUPowerManagement.kext/Contents/MacOS/AppleIntelCPUPowerManagement

For people who use clover here also I leave the patch

<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Find</key>
				<data>
				PnU5
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				PpCQ
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				/w+ELQ==
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				/w+FLQ==
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				AnQLQYP8A3UiuQIG
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				AusLQYP8A3UiuQIG
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				dAtBg/wDdRG5QgYA
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				6wtBg/wDdRG5QgYA
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				dBG5
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				6xG5
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				AQABD4Q=
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				AQABD4U=
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				AXRW
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				AetW
				</data>
			</dict>
		</array>


#548
gorg

gorg

    InsanelyMac Protégé

  • Members
  • Pip
  • 36 posts

I have lost Power Management with 10.9.5 :(

 

 

Yes, the patch works with the 10.9.4 AICPM



#549
yangshun1029

yangshun1029

    InsanelyMac Protégé

  • Members
  • Pip
  • 29 posts
  • Gender:Male

I have lost Power Management with 10.9.5 :(

Use this tool,http://www.insanelym...imate-aio-tool/



#550
stinga11

stinga11

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 105 posts

I have lost Power Management with 10.9.5 :(

you need to patch AICPM with every update. If you don't want to do that you should use clover because has a autopatcher of kext.



#551
gorg

gorg

    InsanelyMac Protégé

  • Members
  • Pip
  • 36 posts

I tried, using pokenguyen's perl commands at post 521 for SB-E (Iam having a Xeon) but that didn't work. Can I use 10.9.4 AICPM while being in 10.9.5 Mavs ?

 

 

you need to patch AICPM with every update. If you don't want to do that you should use clover because has a autopatcher of kext.



#552
stinga11

stinga11

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 105 posts

I tried, using pokenguyen's perl commands at post 521 for SB-E (Iam having a Xeon) but that didn't work. Can I use 10.9.4 AICPM while being in 10.9.5 Mavs ?

Yes, you can.

#553
bilbo

bilbo

    InsanelyMac Protégé

  • Members
  • Pip
  • 43 posts

Hi everybody.

 

Reading this log thread, and a little confused.... I'd like to know your opinion. Is my Xeon a candidate to get a right Power Managment?

 

My CPU: dual processor intel Xeon 2930 v2 . Chipset C602. Motherboard : OEM HP (hp workstation)

OS version: 10.9.4

Bios: original version (I never have heard about HP bios patched)

Bootloader: Chameleon 2380

SMBIOS: Macpro 6,1 (chameleon generated)

DSDT: Cleaned 100% (no comp errors) and minor errors patched.

 

System: I've tried with pike´s ssdt, auto chameleon injections .. etc with diferent cpus behaviors. Or they are in stock freq or in insanes ups and downs freqs.

Now , in order to test , I´ve cleaned my system. I want to start from the begining. No ssdt injections, no chamelon injections.. etc

 

AICPUM: With original version , I have a KP.  I´m using AICPUM kext posted here

 

My AICPMUI output

Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MWAIT C-States.....................: 4384
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35)  : 0x6000C
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE)  : 0xC10E4811A00
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x8403
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7)  : 0x8C5C04AF6A
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: IA32_APERF.................(0xE8)  : 0x88A86F064C
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x1D9F00001A00
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x1A00
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x882E0000
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1D1D1D1D1D1D1E1F
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x2104005B
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0x80068528005A8280
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0x1AF68F1E
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PKGC3_IRTL.............(0x60a) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800005C8
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0x80000000
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0xFE8504B
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: Low Frequency Mode.................: 1200 MHz
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: Clock Speed (Max. Non-Turbo Freq.).: 2600 MHz
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: Maximum Turbo Frequency............: 3100 MHz
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: CPU P-States [ (26) ]
Sep 21 16:08:48 localhost kernel[0]: AICPUPMI: CPU P-States [ (12) 26 ]

The AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2) line is  : 0x8403.  does it mean my bios is not blocked?

 

I have to say that with original AICPUPM , I have the same log output except in lines IA32_MPERF and  IA32_APERF. (just a few numbers change). MSR_PMG_CST_CONFIG_CONTROL.(0xE2) line has the same value.

I have a KP but I had take a photo to boot screen

 

If you think I´m not going to waste my time, what sould  be my next step?

 

thanks



#554
bilbo

bilbo

    InsanelyMac Protégé

  • Members
  • Pip
  • 43 posts

I´ve got some improve following steps from post n. 1 . But I need your help to evaluate my PM.

 

That is what I did. From my clean system:

 

-Set SMcputype value in  my SMBios.plist to 2561

-As I can read on my AICPUMPI log, I assume that my bios doesn't have MSR register 0xE2 blocked.  But I'd like confirm it with your opinion.

-I installed MSRpatcher module , and it's successfully loaded

 

-I generated again my SSDT with Pike´s script. I used next command:

./ssdtPRGen.sh -p 'E5-2630 v2' -w 3 -x 1

After reboot , everything seems fine. I don´t have errors. I have to say in my previous attemps generating ssdt I used slightly different commands and I get a lot of common errors getting states ( Failed to get ....).

 

Also I had "unknown CPU model 0x3a" Thanks to info of other thread that I opened, I found out that I have to use xcpm command.

 

Cause of whatever , I have logs apparently without warnings.

 

This is my AICPUMI log output:

Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MWAIT C-States.....................: 4384
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35)  : 0x6000C
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE)  : 0xC10E4811A00
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x8403
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7)  : 0x346D66E748
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: IA32_APERF.................(0xE8)  : 0x32DE408303
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0x0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x1D9F00001A00
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x1A00
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x882E0000
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400000
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1D1D1D1D1D1D1E1F
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x2104005B
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0x80068528005A8280
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0xBC728F0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PKGC3_IRTL.............(0x60a) : 0x8850
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x8868
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800005C8
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0x80000000
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0x7AE5E83
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: Low Frequency Mode.................: 1200 MHz
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: Clock Speed (Max. Non-Turbo Freq.).: 2600 MHz
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: Maximum Turbo Frequency............: 3100 MHz
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: CPU P-States [ (26) ]
Sep 22 17:07:33 localhost kernel[0]: AICPUPMI: CPU P-States [ (12) 26 ]
Sep 22 17:07:34 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 26 (29) ]
Sep 22 17:07:34 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 12 13 14 ]
Sep 22 17:07:35 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 2 3 5 6 12 13 14 16 ]
Sep 22 17:07:35 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 26 29 (30) ]
Sep 22 17:07:35 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 2 3 5 6 12 13 14 16 ]
Sep 22 17:07:36 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 2 3 5 6 12 13 14 15 16 ]
Sep 22 17:07:36 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 2 3 5 6 8 11 12 13 14 15 16 ]
Sep 22 17:07:37 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 5 6 8 9 11 12 13 14 15 16 ]
Sep 22 17:07:38 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 8 9 11 12 13 14 15 16 ]
Sep 22 17:07:38 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 ]
Sep 22 17:07:39 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]
Sep 22 17:09:05 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 2 3 ]
Sep 22 17:09:07 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 2 3 10 11 ]
Sep 22 17:09:11 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 1 2 3 10 11 ]
Sep 22 17:09:11 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 26 29 30 (31) ]
Sep 22 17:09:11 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 1 2 3 10 11 13 ]
Sep 22 17:09:12 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 1 2 3 10 11 12 13 ]
Sep 22 17:09:13 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 10 11 12 13 ]
Sep 22 17:09:49 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 10 11 12 13 16 ]
Sep 22 17:10:11 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 10 11 12 13 16 ]
Sep 22 17:10:12 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 10 11 12 13 16 ]
Sep 22 17:10:16 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 10 11 12 13 14 16 ]
Sep 22 17:10:20 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 10 11 12 13 14 15 16 ]
Sep 22 17:10:29 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 8 10 11 12 13 14 15 16 ]
Sep 22 17:10:30 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 ]
Sep 22 17:14:11 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 ]
Sep 22 17:14:24 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]

This is my boot log:

2014-09-22 17:05:36 -0400 kernel[0]: Kext loading now disabled.
2014-09-22 17:05:36 -0400 kernel[0]: Kext unloading now disabled.
2014-09-22 17:05:36 -0400 kernel[0]: Kext autounloading now disabled.
2014-09-22 17:05:36 -0400 kernel[0]: Kernel requests now disabled.
2014-09-22 17:07:33 -0400 kernel[0]: Longterm timer threshold: 1000 ms
2014-09-22 17:07:33 -0400 kernel[0]: PMAP: PCID enabled
2014-09-22 17:07:33 -0400 kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
2014-09-22 17:07:33 -0400 kernel[0]: Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
2014-09-22 17:07:33 -0400 kernel[0]: vm_page_bootstrap: 8164582 free pages and 191258 wired pages
2014-09-22 17:07:33 -0400 kernel[0]: kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000]
2014-09-22 17:07:33 -0400 kernel[0]: zone leak detection enabled
2014-09-22 17:07:33 -0400 kernel[0]: "vm_compressor_mode" is 4
2014-09-22 17:07:33 -0400 kernel[0]: standard timeslicing quantum is 10000 us
2014-09-22 17:07:33 -0400 kernel[0]: standard background quantum is 2500 us
2014-09-22 17:07:33 -0400 kernel[0]: mig_table_max_displ = 74
2014-09-22 17:07:33 -0400 kernel[0]: TSC Deadline Timer supported and enabled
2014-09-22 17:07:33 -0400 kernel[0]: "name" not a kext
2014-09-22 17:07:33 -0400 kernel[0]: "Kernel-__SYMTAB" not a kext
2014-09-22 17:07:33 -0400 kernel[0]: "DriversPackage-25b9000" not a kext
2014-09-22 17:07:33 -0400 kernel[0]: FakeSMCKeyStore: started
2014-09-22 17:07:33 -0400 kernel[0]: AppleKeyStore starting (BUILT: Jun  3 2014 21:40:51)
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MWAIT C-States.....................: 4384
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35)  : 0x6000C
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE)  : 0xC10E4811A00
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x8403
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x10414
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7)  : 0x346D66E748
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: IA32_APERF.................(0xE8)  : 0x32DE408303
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0x0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x1D9F00001A00
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x1A00
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x882E0000
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400000
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x1D1D1D1D1D1D1E1F
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x2104005B
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA1003
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0x80068528005A8280
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0xBC728F0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PKGC3_IRTL.............(0x60a) : 0x8850
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x8868
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x141494800005C8
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0x80000000
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0x7AE5E83
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0x0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: Low Frequency Mode.................: 1200 MHz
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: Clock Speed (Max. Non-Turbo Freq.).: 2600 MHz
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: Maximum Turbo Frequency............: 3100 MHz
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=4 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=6 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=8 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=10 LocalApicId=10 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=12 LocalApicId=32 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=14 LocalApicId=34 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=16 LocalApicId=36 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=18 LocalApicId=38 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=20 LocalApicId=40 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=22 LocalApicId=42 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=3 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=5 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=7 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=9 LocalApicId=9 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=11 LocalApicId=11 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=13 LocalApicId=33 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=15 LocalApicId=35 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=17 LocalApicId=37 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=19 LocalApicId=39 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=21 LocalApicId=41 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: AppleACPICPU: ProcessorId=23 LocalApicId=43 Enabled
2014-09-22 17:07:33 -0400 kernel[0]: calling mpo_policy_init for TMSafetyNet
2014-09-22 17:07:33 -0400 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2014-09-22 17:07:33 -0400 kernel[0]: calling mpo_policy_init for Sandbox
2014-09-22 17:07:33 -0400 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
2014-09-22 17:07:33 -0400 kernel[0]: calling mpo_policy_init for Quarantine
2014-09-22 17:07:33 -0400 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
2014-09-22 17:07:33 -0400 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
2014-09-22 17:07:33 -0400 kernel[0]: The Regents of the University of California. All rights reserved.
2014-09-22 17:07:33 -0400 kernel[0]: MAC Framework successfully initialized
2014-09-22 17:07:33 -0400 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
2014-09-22 17:07:33 -0400 kernel[0]: Current tsc from rdtsc64() is 11335073274184. Rendezvouing..
2014-09-22 17:07:33 -0400 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
2014-09-22 17:07:33 -0400 kernel[0]: IOAPIC: Version 0x20 Vectors 88:111
2014-09-22 17:07:33 -0400 kernel[0]: IOAPIC: Version 0x20 Vectors 112:135
2014-09-22 17:07:33 -0400 kernel[0]: ACPI: sleep states S3 S4 S5
2014-09-22 17:07:33 -0400 kernel[0]: CPUSensors: CPU family 0x6, model 0x3e, stepping 0x4, cores 6, threads 12, TJmax 84
2014-09-22 17:07:33 -0400 kernel[0]: CPUSensors: setting platform keys to [d8      ]
2014-09-22 17:07:33 -0400 kernel[0]: FakeSMCKeyStore: key TCAD handler CPUSensors has been replaced with new prioritized handler CPUSensors
2014-09-22 17:07:33 -0400 kernel[0]: FakeSMCKey: key TCAD handler CPUSensors has been replaced with new prioritized handler CPUSensors
2014-09-22 17:07:33 -0400 kernel[0]: CPUSensors: base CPU multiplier is 26
2014-09-22 17:07:33 -0400 kernel[0]: CPUSensors: started
2014-09-22 17:07:33 -0400 kernel[0]: pci (build 22:16:29 Sep 19 2013), flags 0x61008, pfm64 (44 cpu) 0xfff80000000, 0x80000000
2014-09-22 17:07:33 -0400 kernel[0]: waitForSystemMapper
2014-09-22 17:07:33 -0400 kernel[0]: Backtrace 0xffffff80006ba40e 0xffffff80006bad48 0xffffff80006bb37d 0xffffff80006bdfff 0xffffff7f81e194b9 0xffffff80006956ef 0xffffff80006952af
2014-09-22 17:07:33 -0400 kernel[0]: Kernel Extensions in backtrace:
2014-09-22 17:07:33 -0400 kernel[0]: com.apple.driver.AppleRTC(2.0)[EE7FCFFD-F396-32F9-8424-859D3F20501D]@0xffffff7f81e18000->0xffffff7f81e21fff
2014-09-22 17:07:33 -0400 kernel[0]: dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xffffff7f8160c000
2014-09-22 17:07:33 -0400 kernel[0]: FakeSMC v6.9.1315 Copyright 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved.
2014-09-22 17:07:33 -0400 kernel[0]: FakeSMC: 13 preconfigured keys added
2014-09-22 17:07:33 -0400 kernel[0]: SMC: successfully initialized
2014-09-22 17:07:33 -0400 kernel[0]: RTC: Only single RAM bank (128 bytes)
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 333345
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelCPUPowerManagement: (built 21:36:10 Jun  3 2014) initialization complete
2014-09-22 17:07:33 -0400 kernel[0]: [ PCI configuration begin ]
2014-09-22 17:07:33 -0400 kernel[0]: console relocated to 0xe1000000
2014-09-22 17:07:33 -0400 kernel[0]: mcache: 24 CPU(s), 64 bytes CPU cache line size
2014-09-22 17:07:33 -0400 kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
2014-09-22 17:07:33 -0400 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
2014-09-22 17:07:33 -0400 kernel[0]: rooting via boot-uuid from /chosen: A12B4273-4D60-3CCC-84E5-99E15382E22E
2014-09-22 17:07:33 -0400 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
2014-09-22 17:07:33 -0400 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
2014-09-22 17:07:33 -0400 kernel[0]: com.apple.AppleFSCompressionTypeLZVN kmod start
2014-09-22 17:07:33 -0400 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
2014-09-22 17:07:33 -0400 kernel[0]: LS(4050) Little Snitch: start
2014-09-22 17:07:33 -0400 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
2014-09-22 17:07:33 -0400 kernel[0]: com.apple.AppleFSCompressionTypeLZVN load succeeded
2014-09-22 17:07:33 -0400 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelCPUPowerManagementClient: ready
2014-09-22 17:07:33 -0400 kernel[0]: [ PCI configuration end, bridges 10, devices 22 ]
2014-09-22 17:07:33 -0400 kernel[0]: [ PCI configuration begin ]
2014-09-22 17:07:33 -0400 kernel[0]: [ PCI configuration end, bridges 13, devices 25 ]
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: CPU P-States [ (26) ]
2014-09-22 17:07:33 -0400 kernel[0]: vendor:device: 0x8086:0x1502.
2014-09-22 17:07:33 -0400 kernel[0]: SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0x1c11, Winbond sequence ID=0xffff
2014-09-22 17:07:33 -0400 kernel[0]: GeForceSensors (pci5): trying to shadow VBIOS...
2014-09-22 17:07:33 -0400 kernel[0]: vendor:device: 0x8086:0x10d3.
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelE1000e(Info): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelE1000e(Info): changing MTU from 0 to 1500
2014-09-22 17:07:33 -0400 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/Samsung SSD 840 EVO 120GB Media/IOGUIDPartitionScheme/Mavericks@2
2014-09-22 17:07:33 -0400 kernel[0]: BSD root: disk0s2, major 1, minor 2
2014-09-22 17:07:33 -0400 kernel[0]: USBF:    1.558    GenericUSBXHCI::CreateRootHubDevice  Bus 14 already taken
2014-09-22 17:07:33 -0400 kernel[0]: FireWire runtime power conservation disabled. (3)
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelE1000e(Info): AppleIntelE1000e:rx = 256, tx = 256
2014-09-22 17:07:33 -0400 kernel[0]: GeForceSensors (pci5): VBIOS successfully read from PROM
2014-09-22 17:07:33 -0400 kernel[0]: hfs: mounted Mavericks on device root_device
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelE1000e(Info): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelE1000e(Info): changing MTU from 0 to 1500
2014-09-22 17:07:33 -0400 kernel[0]: FireWire (OHCI) Lucent ID 5811 PCI now active, GUID 0060b000009cf042; max speed s400.
2014-09-22 17:07:33 -0400 kernel[0]: AppleIntelE1000e(Info): AppleIntelE1000e:rx = 256, tx = 256
2014-09-22 17:07:33 -0400 kernel[0]: USBF:    2.426    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 7 of Hub at 0x1d100000)
2014-09-22 17:07:33 -0400 kernel[0]: AICPUPMI: CPU P-States [ (12) 26 ]
2014-09-22 17:07:33 -0400 kernel[0]: Waiting for DSMOS...hfs: mounted MavericksBAK on device disk1s2
2014-09-22 17:07:33 -0400 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
2014-09-22 17:07:33 -0400 kernel[0]: Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1
2014-09-22 17:07:33 -0400 kernel[0]: Previous Shutdown Cause: 5
2014-09-22 17:07:33 -0400 kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
2014-09-22 17:07:33 -0400 kernel[0]: Controller: Intel Patsburg (vendor ID: 80C86, deontroller: vice ID: 1Nd20)
2014-09-22 17:07:33 -0400 kernel[0]: Vidia (Unknown) (vendor ID: 10de, device ID: 0e0a)
2014-09-22 17:07:33 -0400 kernel[0]: Apple16X50PCI22: Identified 1 Serial channels at PCI Bus=0 Dev=22 Func=3
2014-09-22 17:07:33 -0400 kernel[0]: init
2014-09-22 17:07:33 -0400 kernel[0]: probe
2014-09-22 17:07:33 -0400 kernel[0]: Apple16X50UARTSync22: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
2014-09-22 17:07:33 -0400 kernel[0]: NVDAStartup: Web
2014-09-22 17:07:33 -0400 kernel[0]: start
2014-09-22 17:07:33 -0400 kernel[0]: DSMOS has arrived
2014-09-22 17:07:33 -0400 kernel[0]: [IOBluetoothHCIController][start] -- completed
2014-09-22 17:07:33 -0400 kernel[0]: NVDAGK100HAL loaded and registered
2014-09-22 17:07:33 -0400 kernel[0]: Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
2014-09-22 17:07:33 -0400 kernel[0]: GeForceSensors (pci5): chipset: GK104 (NVE4) bios: 80.04.50.00
2014-09-22 17:07:33 -0400 kernel[0]: GeForceSensors (pci5): started
2014-09-22 17:07:33 -0400 kernel[0]: SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0x1c11, Winbond sequence ID=0xffff
2014-09-22 17:07:33 -0400 kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
2014-09-22 17:07:33 -0400 kernel[0]: [AGPM Controller] unknownPlatform
2014-09-22 17:07:33 -0400 kernel[0]: SuperIODevice: [Fatal] found unsupported chip! ITE sequence ID=0x1c11, Winbond sequence ID=0xffff
2014-09-22 17:07:34 -0400 kernel[0]: AICPUPMI: CPU P-States [ 12 26 (29) ]
2014-09-22 17:07:34 -0400 kernel[0]: VM Swap Subsystem is ON
2014-09-22 17:07:34 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 12 13 14 ]
2014-09-22 17:07:35 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 2 3 5 6 12 13 14 16 ]
2014-09-22 17:07:35 -0400 kernel[0]: USBF:    5.713    The IOUSBFamily was not able to enumerate a device.
2014-09-22 17:07:35 -0400 kernel[0]: AICPUPMI: CPU P-States [ 12 26 29 (30) ]
2014-09-22 17:07:35 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 2 3 5 6 12 13 14 16 ]
2014-09-22 17:07:35 -0400 kernel[0]: AppleKeyStore:Sending lock change 0
2014-09-22 17:07:35 -0400 kernel[0]: AppleIntelE1000e(Info): e1000e NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
2014-09-22 17:07:36 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 2 3 5 6 12 13 14 15 16 ]
2014-09-22 17:07:36 -0400 kernel[0]: USBF:    6.554    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 7 of Hub at 0x1d100000)
2014-09-22 17:07:36 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 2 3 5 6 8 11 12 13 14 15 16 ]
2014-09-22 17:07:37 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 5 6 8 9 11 12 13 14 15 16 ]
2014-09-22 17:07:38 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 8 9 11 12 13 14 15 16 ]
2014-09-22 17:07:38 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15 16 ]
2014-09-22 17:07:39 -0400 kernel[0]: USBF:    9.953    The IOUSBFamily was not able to enumerate a device.
2014-09-22 17:07:39 -0400 kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]
2014-09-22 17:07:40 -0400 kernel[0]: USBF:    10.781    The IOUSBFamily is having trouble enumerating a USB device that has been plugged in.  It will keep retrying.  (Port 7 of Hub at 0x1d100000)
2014-09-22 17:07:41 -0400 kernel[0]: USBF:    11.612    The IOUSBFamily gave up enumerating a USB device after 10 retries.  (Port 7 of Hub at 0x1d100000)
2014-09-22 17:07:41 -0400 kernel[0]: USBF:    11.612    The IOUSBFamily was not able to enumerate a device.
2014-09-22 17:08:03 -0400 kernel[0]: **** [IOBluetoothHCIController][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport!
2014-09-22 17:09:05 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 2 3 ]
2014-09-22 17:09:07 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 2 3 10 11 ]
2014-09-22 17:09:11 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 1 2 3 10 11 ]
2014-09-22 17:09:11 -0400 kernel[0]: AICPUPMI: CPU P-States [ 12 26 29 30 (31) ]
2014-09-22 17:09:11 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 1 2 3 10 11 13 ]
2014-09-22 17:09:12 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 1 2 3 10 11 12 13 ]
2014-09-22 17:09:13 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 10 11 12 13 ]
2014-09-22 17:09:49 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 10 11 12 13 16 ]
2014-09-22 17:09:50 -0400 kernel[0]: firefox (map: 0xffffff803e28cf00) triggered DYLD shared region unnest for map: 0xffffff803e28cf00, region 0x7fff85600000->0x7fff85800000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
2014-09-22 17:10:11 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 10 11 12 13 16 ]
2014-09-22 17:10:12 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 10 11 12 13 16 ]
2014-09-22 17:10:16 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 10 11 12 13 14 16 ]
2014-09-22 17:10:20 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 10 11 12 13 14 15 16 ]
2014-09-22 17:10:29 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 8 10 11 12 13 14 15 16 ]
2014-09-22 17:10:30 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 ]
2014-09-22 17:14:11 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 ]
2014-09-22 17:14:12 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 8 9 10 11 12 13 14 15 16 ]
2014-09-22 17:14:24 -0400 kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]

About my CPU´s behavior: I think is a bit erratic:

 

my Xeon works from 1,2 (x12) as low freq until 2,6 , as stock freq (confirmed in windows). turbo freq. is 3,1

Well, surprisingly, in iddle, freqs can reach 2,8 2,9. Low freqs are never lower than 2,4 aprox. It seems permanently overclocked.

 

Over windows, cpu seems reach usual freqs... in iddle, 1,2 to 2,6. ( I couldn´t see turbo freqs maybe beacuse I didn´t  run real stressful tests.)

Setting my system with no KM (no ssdt)  It runs from 2,1 aprox to 2,6 , even can reach 1,8 in real iddle status. Of course, no turbo freqs

 

Sleep works good.

 

About performance with geekbench:

 

windows (my reference) : 2321/26972 in 32 bits .  

Mavericks : 2574/28214 in 32 bits   (in 64bits 2799/31543 <-- higher values I´ve got)

 

I think results indicate a little of overclock. Also maybe windows results are a little low because I saw cpu never reached turbo freqs. I think geekbench is not a real stressfully test.

 

with Cinebench:

 

windows CPU 1519 cb

Mavericks: CPU 1514 cb

 

As I said, I need your experience to judge my current PM, if it works correctly (I don't think so) and How I could improve it.



#555
J Lamp

J Lamp

    InsanelyMac Protégé

  • Members
  • PipPip
  • 52 posts

I too have lost PM on my 3930k / x79 rig with the 10.9.5 update. I have been using both Omni's Sandy-E patch and the MSR patch to make things work (it's a Gigabyte X79-UD5 board, thus the MSR patch.)

 

I used those same patches on the 10.9.5 AICPUPM kext, but my machine KP'd on boot. I've rolled back to the 10.9.4 AICPUPM kext and all is good for now.

 

Looking through the hex on the new AICPUPM binary I'm seeing all the code that needs to be patched from Omni's original posts and also some of the code listed by Stinga11 for Yosemite. If I recall correctly this sort of "hybrid" update happened with a few kexts in the 10.8.4 - 10.8.5 transition just prior to Mavericks release.

 

I could start randomly patching the kext binary and testing, but aside from doing some basic pattern matching I have no idea what I'm doing.

 

Can any of the brain trusts here offer any insight?



#556
bilbo

bilbo

    InsanelyMac Protégé

  • Members
  • Pip
  • 43 posts

After anailze my results, I realize I have two problems: My cpu can´t reach lower P-states and I have residency values=0
 
I did this #423 Now I have more lower p-states. (Thought not all) .  Indedd, my cpu now in iddle goes to 1,4 - 1,6 ghz.
 

Sep 24 12:25:16 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 26 (29) ]
Sep 24 12:25:16 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 4 5 6 ]
Sep 24 12:25:17 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 4 5 6 8 9 11 ]
Sep 24 12:25:17 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 4 5 6 8 9 11 16 ]
Sep 24 12:25:18 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 4 5 6 8 9 11 14 15 16 ]
Sep 24 12:25:18 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 4 5 6 8 9 11 14 15 16 ]
Sep 24 12:25:19 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 8 9 11 14 15 16 ]
Sep 24 12:25:19 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 11 13 14 15 16 ]
Sep 24 12:25:20 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 ]
Sep 24 12:25:22 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 ]
Sep 24 12:25:23 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 (23) 26 29 ]
Sep 24 12:25:23 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ]
Sep 24 12:25:24 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 23 26 29 (30) ]
Sep 24 12:25:26 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 ]
Sep 24 12:25:30 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 (19) 23 26 29 30 ]
Sep 24 12:25:34 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 ]
Sep 24 12:25:35 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 14 15 ]
Sep 24 15:26:30 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 14 15 ]
Sep 24 16:28:52 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 14 15 ]
Sep 24 16:30:05 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 14 15 ]
Sep 24 16:30:24 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 12 13 14 15 ]
Sep 24 16:31:07 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU P-States [ 12 19 23 26 29 30 (31) ]
Sep 24 16:32:03 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 12 13 14 15 ]
Sep 24 16:36:19 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 12 13 14 15 ]
Sep 24 16:42:02 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 12 13 14 15 ]
Sep 24 16:42:06 jimmi-z820s-Mac-Pro kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]

 
In my IOreg I can see I have a lot of states (c and p)

http://es.tinypic.co...?pic=fvd74n&s=8

 

However , I still having 0 value for residency. What do I have to do to fix that?



#557
stinga11

stinga11

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 105 posts
This guide is for get a working Power Management on any Gigabyte X79 or another motherboard with a MSR LOCK without patching the bios.
 
Sandy Bridge-E
 
1. We need to patch the AICPM with the OMNI patch otherwise it will never work. I made a command file to this, Open with double click a type your password.
 
Perl patch:
 
10.9
Attached File  10.9 aicpm patch.command.zip   1.2KB   8 downloads
 
10.10
Attached File  10.10 aicpm patch.command.zip   1.24KB   13 downloads
 
Or
 
Clover patch ( If you prefered to use the clover patch not need to use the perl patch).
 
10.9
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Find</key>
				<data>
				/AJ0
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				/ALr
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Find</key>
				<data>
				hF8B
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				hV8B
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Find</key>
				<data>
				dQe5
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				6we5
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Find</key>
				<data>
				hC8B
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				hS8B
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Find</key>
				<data>
				AXRY
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				AetY
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Find</key>
				<data>
				PnU6
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				PpCQ
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string></string>
				<key>Find</key>
				<data>
				dBC5
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				6xC5
				</data>
			</dict>
		</array>
 
10.10
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Find</key>
				<data>
				AnQLQYP8A3UiuQIG
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				AusLQYP8A3UiuQIG
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				dBG5
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				6xG5
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				/w+ELQ==
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				/w+FLQ==
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				dAtBg/wDdRG5QgYA
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				6wtBg/wDdRG5QgYA
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				AXRW
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				AetW
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				AQABD4Q=
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				AQABD4U=
				</data>
			</dict>
			<dict>
				<key>Find</key>
				<data>
				PnU5
				</data>
				<key>Name</key>
				<string>AppleIntelCPUPowerManagement</string>
				<key>Replace</key>
				<data>
				PpCQ
				</data>
			</dict>
		</array>
 
2. We need to patch the Msr lock. For this we need download the following script.
 
 
NOTE: Clover has the MSR lock patcher but for some reason does not work with X79 platform.
 
 
3. Finally we need to download the following dummy kext and put it in /System/Library/Extensions/
Attached File  X79PlatformPlugin.kext.zip   6.87KB   20 downloads
 
4. Now is time to create it a SSDT for our cpu for this you need download the ssdtPRGen.
Attached File  install.zip   919bytes   17 downloads
 
5. run Kext Utility and enjoy your gigabyte x79 with power management.
 
For Ivy Bridge-E do everything except step one.






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy