Supertod Posted December 30, 2013 Share Posted December 30, 2013 Since getting HWMonitor and HWSensors set up the boot time has gone from ~7 seconds to over 30. Looking at the boot log I think it may be something to do with multiple FakeSMC kexts installed but I'm not sure how to resolve it. Specs: CPU Intel Core i7-4770K 3.5GHz Quad-Core Processor CPU Cooler* Antec KUHLER H2O 920 110.0 CFM Liquid CPU Cooler Memory G.Skill Ripjaws Z Series 16GB (4 x 4GB) DDR3-1600 Memory Storage Plextor M5S Series 256GB 2.5" Solid State Disk Video Card MSI Radeon HD 7970 3GB Video Card Wireless Network Adapter TP-Link TL-WDN4800 802.11a/b/g/n PCI-Express x1 Wi-Fi Adapter Power Supply OCZ ZT 650W 80 PLUS Bronze Certified ATX12V Power Supply Motherboard Gigabyte Z87M-D3H Boot Log: Longterm timer threshold: 1000 ms PMAP: PCID enabled PMAP: Supervisor Mode Execute Protection enabled Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64 vm_page_bootstrap: 4040146 free pages and 121390 wired pages kext submap [0xffffff7f807a5000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a5000] zone leak detection enabled "vm_compressor_mode" is 4 standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 TSC Deadline Timer supported and enabled Refusing new kext com.apple.driver.AppleRTC, v2.0: already have prelinked v1111.0. NullCPUPowerManagement::init: properties=0xffffff801fc2f7c0 NullCPUPowerManagement::start FakeSMCKeyStore: started AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34) FakeSMC v6.0.1057 Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved. AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers FakeSMC: 11 preconfigured keys added IOAPIC: Version 0x20 Vectors 64:87 ACPI: sleep states S3 S4 S5 pci (build 22:16:29 Sep 19 2013), flags 0x63008, pfm64 (39 cpu) 0x7f80000000, 0x80000000 [ PCI configuration begin ] ACPISensors (TZ00): 1 sensor added ACPISensors (TZ00): started OSMetaClass: Kext org.netkas.FakeSMC class FakeSMC is a duplicate;kext org.netkas.driver.FakeSMC already has a class by that name. Kext org.netkas.FakeSMC start failed (result 0xdc00400a). Kext org.netkas.FakeSMC failed to load (0xdc008017). Failed to load kext org.netkas.FakeSMC (error 0xdc008017). console relocated to 0x7f90000000 [ PCI configuration end, bridges 7, devices 15 ] FakeSMC v6.0.1057 Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved. FakeSMC: 16 preconfigured keys added ACPISensors (TZ01): 1 sensor added ACPISensors (TZ01): started PXSX cannot assert wake from D3cold USBMSC Identifier (non-unique): 20121024010234 0x480 0xd010 0x3704, 2 FakeSMC: [Fatal] failed to initialize SMC device FakeSMC v6.0.1057 Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved. FakeSMC: 11 preconfigured keys added FakeSMC: [Fatal] failed to initialize SMC device SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x3c, stepping 0x3, cores 4, threads 8, TJmax 100 CPUSensors: setting platform keys to [j43 ] CPUSensors: RAPL units power: 0x3 energy: 0xe time: 0xa CPUSensors: started mcache: 8 CPU(s), 64 bytes CPU cache line size mbinit: done [128 MB total pool size, (85/42) split] Pthread support ABORTS when sync kernel primitives misused SuperIODevice: found ITE IT8728F on port=0x2e address=0xa30 IT87xxSensors: started rooting via boot-uuid from /chosen: DA45811F-48FC-334C-8A75-A31CDF10ED5F Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchSeriesAHCI/PRT4@4/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/PLEXTOR PX-256M5S Media/IOGUIDPartitionScheme/Mavericks@2 BSD root: disk0s2, major 1, minor 3 jnl: b(1, 3): replay_journal: from: 5196800 to: 8226816 (joffset 0x774000) jnl: b(1, 3): journal replay done. hfs: mounted Mavericks on device root_device XCPM: registered ath_get_caps[4044] rx chainmask mismatch actual 7 sc_chainmak 0 6.286577: ath_get_caps[4019] tx chainmask mismatch actual 7 sc_chainmak 0 6.291078: Atheros: mac 448.3 phy 0.0 radio 0.0 6.291084: Use hw queue 0 for WME_AC_BE traffic 6.291089: Use hw queue 1 for WME_AC_BK traffic 6.291094: Use hw queue 2 for WME_AC_VI traffic 6.291098: Use hw queue 3 for WME_AC_VO traffic 6.291103: Use hw queue 8 for CAB traffic 6.291107: Use hw queue 9 for beacons 6.291166: wlan_vap_create : enter. devhandle=0x9f9846b0, opmode=IEEE80211_M_STA, flags=0x1 6.291192: wlan_vap_create : exit. devhandle=0x9f9846b0, opmode=IEEE80211_M_STA, flags=0x1. 6.291216: ATH tunables: 6.291219: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128] hfs: Removed 38 orphaned / unlinked files and 342 directories USBF: 7.386 The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 5 of Hub at 0x15000000) USBF: 8.226 The IOUSBFamily has successfully enumerated the device (Port 5 of Hub at 0x15000000). USBMSC Identifier (non-unique): 20121024010234 0x480 0xd010 0x3704, 3 flow_divert_kctl_disconnect (0): disconnecting group 1 Waiting for DSMOS... Controller: Intel Lynx Point (vendor ID: 8086, device ID: 8c20) Controller: ATI R1000 (vendor ID: 1002, device ID: aaa0) error: invalid CORB size: 00 error: getCapabilities failed Previous Shutdown Cause: 5 SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode Apple16X50ACPI1: Identified Serial Port on ACPI Device=UAR1 Controller: Intel (Unknown) (vendor ID: 8086, device ID: 0c0c) Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 init probe start DSMOS has arrived [IOBluetoothHCIController][start] -- completed OSMetaClass: Kext org.netkas.FakeSMC class FakeSMC is a duplicate;kext org.netkas.driver.FakeSMC already has a class by that name. Kext org.netkas.FakeSMC start failed (result 0xdc00400a). Kext org.netkas.FakeSMC failed to load (0xdc008017). Failed to load kext org.netkas.FakeSMC (error 0xdc008017). VM Swap Subsystem is ON ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3c -- power management may be incomplete or unsupported AMDTahitiGraphicsAccelerator: ** Device in slot: SLOT--1 ** RadeonSensors (pci1): found ATI Radeon ID: 0x6798, ATOM BIOS: 113 RadeonSensors (pci1): using device-id to resolve temperature sensor type RadeonSensors (pci1): adding Southern Islands thermal sensor RadeonSensors (pci1): started **** [IOBluetoothHCIController][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport! IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification IO80211Interface::efiNVRAMPublished(): 67.741903: ATHR: unknown locale: 21 AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving). AtherosNewma40P2PInterface::init name <p2p0> role 1 AtherosNewma40P2PInterface::init() <p2p> role 1 67.754367: setWOW_PARAMETERS:wowevents = 2(1) 67.754748: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap 67.754762: switchVap from 1 to 1 67.756500: ATHR: unknown locale: 21 67.768395: performCountryCodeOperation: Not connected, scan in progress[0] 67.770293: ATHR: unknown locale: 21 67.771395: ATHR: unknown locale: 21 en0: BSSID changed to 00:24:36:ac:81:d0 AirPort: Link Up on en0 68.753139: apple80211Request[10514] Unsupported ioctl 181 en0: BSSID changed to 00:24:36:ac:81:d0 68.754325: apple80211Request[10514] Unsupported ioctl 175 68.754343: apple80211Request[10514] Unsupported ioctl 194 AirPort: RSN handshake complete on en0 flow_divert_kctl_disconnect (0): disconnecting group 1 69.096830: ATHR: unknown locale: 21 69.103424: ATHR: unknown locale: 21 69.122160: ATHR: unknown locale: 21 GFX0: Not usable utun_ctl_connect: creating interface utun0 flow_divert_kctl_disconnect (0): disconnecting group 1 103.072344: ATHR: unknown locale: 21 103.403950: ATHR: unknown locale: 21 AppleKeyStore:Sending lock change 0 fsevents: watcher dbfseventsd (pid: 353) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework 0 [Level 7] [Facility messagetracer] [com.apple.message.domain com.apple.kernel.external_modification] [com.apple.message.signature FinderLoadBundle(3B5F73F3-18A7-8797-F77D-9DEF5C595CA0)] [com.apple.message.signature2 Finder(595E56AB-A744-3A35-A2DA-255CEB3B4DDB)] [com.apple.message.result noop] [com.apple.message.summarize YES] IOHIDSystem: postEvent LLEventQueue overflow. Link to comment Share on other sites More sharing options...
LiskoFINAL Posted January 2, 2014 Share Posted January 2, 2014 I have the same problem ): very slow boot after installing HWSensors with latest fakesmc and plug-ins Link to comment Share on other sites More sharing options...
Supertod Posted January 4, 2014 Author Share Posted January 4, 2014 I have the same problem ): very slow boot after installing HWSensors with latest fakesmc and plug-ins Do you get these errors in verbose boot? OSMetaClass: Kext org.netkas.FakeSMC class FakeSMC is a duplicate;kext org.netkas.driver.FakeSMC already has a class by that name. Kext org.netkas.FakeSMC start failed (result 0xdc00400a). Kext org.netkas.FakeSMC failed to load (0xdc008017). Failed to load kext org.netkas.FakeSMC (error 0xdc008017). Also there seems to be long delays after these two parts. RadeonSensors (pci1): started (long delay) **** [IOBluetoothHCIController][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport! (long delay) Link to comment Share on other sites More sharing options...
bluenote56 Posted January 4, 2014 Share Posted January 4, 2014 I had the very same problem. It took ages to boot after updating HWSensors with latest fakesmc and plug-ins. So I tried to go back and re installed 5.3.820 version to test. Everything is fine again now and it boots fast. So the problem is in FakeSMC and HWMonitor stuff at least for me with 10.9.1. I'll not update again for now. Link to comment Share on other sites More sharing options...
Supertod Posted January 4, 2014 Author Share Posted January 4, 2014 I had the very same problem. It took ages to boot after updating HWSensors with latest fakesmc and plug-ins. So I tried to go back and re installed 5.3.820 version to test. Everything is fine again now and it boots fast. So the problem is in FakeSMC and HWMonitor stuff at least for me with 10.9.1. I'll not update again for now. What's the best way to remove the newer version and reinstall the old one? Link to comment Share on other sites More sharing options...
Derty Posted January 4, 2014 Share Posted January 4, 2014 delete fakesmc from system/library/extension, normally plugins are into fakesmc/contens/plugins, if not, search for that, and delete. install new fakesmc with plugins in attachment in S/L/E with kextwizard, repair permissions or restart with -v -f FakeSMC.kext.zip Link to comment Share on other sites More sharing options...
bluenote56 Posted February 12, 2014 Share Posted February 12, 2014 With HW Monitor Version 6.0.1085 update everything works fine, no issues at all. Link to comment Share on other sites More sharing options...
Recommended Posts