Jump to content

iAtkos ML2 10.8.2 [HD4000][VGA]


brianmoyano
 Share

13 posts in this topic

Recommended Posts

Hi all, how are you?

After several years of wanting hackintosh (And can't do it due to lack of hardware) i finally installed iAtkos ML2 in my new PC. Here are my specs:

 

i5 3570k

Gigabyte Z77M-D3H

4GB Kingston HyperX DDR3 1666mhz

HD4000

 

First install gone wrong because of HD4000 drivers. Second install gone well, but i didn't install HD4000 drivers because will fail. So, after reboot had 1024x768.

 

Tried to instal chimera and then put only 64mbs to video card, and in the boot, the spinning wheel freezes.

 

So, can i install the HD 4000 Kexts to use it with my VGA monitor, or this will never happen?

 

Sorry for my english, i'll try to do my best next time.

Link to comment
Share on other sites

follow this here   B)  you need the last  Chameleon bootloader and the right IntelAzul value 

 

http://www.insanelymac.com/forum/topic/291614-intel-hd4000-and-haswell-inject-aaplig-platform-id/

Cool, but, do i have to make a clean install? In that case, which options do i select and which i don't?

Because when i try to start osx, it freeze at the apple logo. I din't tried yet with -x

And, if i made a clean install, do i have to re-do the usb install?

Link to comment
Share on other sites

 Yes try a retail fresh Install

 

 

 

or try this flag  to return on desktop  

 

 GraphicsEnabler=Yes -v -x 

 

and ran chameleon with the option HD4000 

one by one and reboot and see if you have the right  one    :)

Link to comment
Share on other sites

Cool, but, do i have to make a clean install? In that case, which options do i select and which i don't?

Because when i try to start osx, it freeze at the apple logo. I din't tried yet with -x

And, if i made a clean install, do i have to re-do the usb install?

A Capri platform IG is matching your HD4000. You have to try all Platform IG´s for desktop to find the right one, after installing chameleon, gotten here from Downloads.

 

I suggest, if you have your gfx working without a scrambled screen, that you should get an original version of Mountain Lion or Mavericks, and make a vanilla usb installer by following this guide: http://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-mavericks/

 

Distros, like the one, you have used, produce to much unneccessary and in the end disturbing garbage, which is nearly impossible to get fully rid off. A vanilla self controlled install, matching the hardware of your system as near as possible, let you get a smooth running system in the end. But one must be a bit patient, because it lasts longer.

 

Have fun.

Link to comment
Share on other sites

A Capri platform IG is matching your HD4000. You have to try all Platform IG´s for desktop to find the right one, after installing chameleon, gotten here from Downloads.

 

I suggest, if you have your gfx working without a scrambled screen, that you should get an original version of Mountain Lion or Mavericks, and make a vanilla usb installer by following this guide: http://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-mavericks/

 

Distros, like the one, you have used, produce to much unneccessary and in the end disturbing garbage, which is nearly impossible to get fully rid off. A vanilla self controlled install, matching the hardware of your system as near as possible, let you get a smooth running system in the end. But one must be a bit patient, because it lasts longer.

 

Have fun.

 

 

 Yes try a retail fresh Install

 

 

 

or try this flag  to return on desktop  

 

 GraphicsEnabler=Yes -v -x 

 

and ran chameleon with the option HD4000 

one by one and reboot and see if you have the right  one    :)

Hi, i'm gonna list what i did today, and what i get:

- Installed OSX again using this guide: http://iatkos.me/forum/viewtopic.php?f=77&t=23108

- After boot everything looked the same

- In a hispanic site (Taringa) i found a guide to enable HD 4000 and worked. I did this

- Path system with Chimera

- Install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and apply some setings

- Install chamaleon wizard and apply some setings.

- Then, reboot, i had 1920x1080 resolution, and in specs it says HD 4000, but transitions are slow, and i feel no-aceleration hardware. Transitions are slow, and if i open center notifications, it shows red squares for a second.

 

ihs740QbGQ23L.png

 

This is what i finally get, but, no acceleration hardware.

Link to comment
Share on other sites

Yea, but i don't want to download it again.

You're telling me that there's no way to full enable hd 4000 in iatkos ml2?

In case i have to download mavericks, can i do it from windows?

Link to comment
Share on other sites

Yea, but i don't want to download it again.

You're telling me that there's no way to full enable hd 4000 in iatkos ml2?

In case i have to download mavericks, can i do it from windows?

used your iatkos to download Mavericks, its free on Appstore  :)

Link to comment
Share on other sites

 Share

×
×
  • Create New...