giutor Posted November 17, 2013 Share Posted November 17, 2013 Hi, I tried to install quite a lot of IONetworkingFamily.kexts but none was working. I'm wondering if there is a kext for this wired card. If there is not, would u please tell me how to create one from scratch? Thanks, GiuTor Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 Hi. If your dev-id is 16B3, so try this version. After that look at Console, IOReg and about that mac(PCI, Ethernet) DebugBCM5722D.kext.zip 1 Link to comment Share on other sites More sharing options...
Onixs Posted November 18, 2013 Share Posted November 18, 2013 Hi. If your dev-id is 16B3, so try this version. After that look at Console, IOReg and about that mac(PCI, Ethernet) What about 16B5 please. Thanks. Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 Hi. If your dev-id is 16B3, so try this version. After that look at Console, IOReg and about that mac(PCI, Ethernet) Hello Alex, thanks u very much for your help. I'm new to the Mac world. Would you please tell me where exactly shall I place the content of your attached zip file in IONetworkingFamily.kext/Contents/PlugIns/AppleBCM5701Ethernet.kext ? Thanks GiuTor Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 Is your dev-Id 16b5 exactly? Because all website tell that it should be 16b3 for bcm57786. http://pci-ids.ucw.cz/read/PC/14e4 Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 Is your dev-Id 16b5 exactly? Because all website tell that it should be 16b3 for bcm57786. http://pci-ids.ucw.cz/read/PC/14e4 No, it's 16b3. I checked from Linux with lspci -nn: 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM57786 Gigabit Ethernet PCIe [14e4:16b3] (rev 01) Link to comment Share on other sites More sharing options...
Onixs Posted November 18, 2013 Share Posted November 18, 2013 Is your dev-Id 16b5 exactly? Because all website tell that it should be 16b3 for bcm57786. http://pci-ids.ucw.cz/read/PC/14e4 Ah ok. Mine is actually bcm57785. Sorry about that Can you compile http://www.insanelymac.com/forum/files/file/79-bcm5722d/ to support SL (32&64). Thanks again Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 Ah ok. Mine is actually bcm57785. Sorry about that Can you compile http://www.insanelymac.com/forum/files/file/79-bcm5722d/ to support SL (32&64). Thanks again Would you please tell me where shall I copy the above file? In the message log I get a file not found error related to IOEthernetAVBController. Can you please share light on this matter, I'm brand new to the Mac world. Thank u. GiuTor Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 You can copy bcm5722d to S.../L.../E...IONetworkingFamily.kext/Contents/PlugIns or just to S/L/E. Don't forget lunch kext utility after. In a word. Copy it to System/Library/Extensions. As it is easy to find. Link to comment Share on other sites More sharing options...
Onixs Posted November 18, 2013 Share Posted November 18, 2013 I compiled it myself with your source.. Thanks again for the 3rd time.. Cheers Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 I compiled it myself with your source.. Thanks again for the 3rd time.. Cheers Oh. Great! Can you give me your version for SL? I'll attache it to my link of BCM5772D. Because I can't compile it since I use Mavericks. I was going to give you that instruction http://www.insanelymac.com/forum/topic/247470-bcm5722-bcm5754m-bcm5755m-bcm5787m-and-bcm5906m-nic-driver-3264-bit/?p=1932872 but I see you've already done it and that's good. I compiled it myself with your source.. Thanks again for the 3rd time.. Cheers -- And by the way, does it work for you? Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 You can copy bcm5722d to S.../L.../E...IONetworkingFamily.kext/Contents/PlugIns or just to S/L/E. Don't forget lunch kext utility after. In a word. Copy it to System/Library/Extensions. As it is easy to find. This is what I get when trying to load BCM5722D (please see the attached pictures). Did I miss anything? It doesn't say which are the missed dependencies. I have also attached my chameleon boot file. Thanks for your patience, GiuTor Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 This is what I get when trying to load BCM5722D (please see the attached pictures). Did I miss anything? It doesn't say which are the missed dependencies. I have also attached my chameleon boot file. Thanks for your patience, GiuTor Move kext to S/L/E Launch kext utility http://www.insanelymac.com/forum/topic/140647-latest-kext-utility-mavericks-super-speed-edition/ reboot. Sorry, Try this kext, made a error at sourses DBCM5722D.kext.zip Link to comment Share on other sites More sharing options...
Onixs Posted November 18, 2013 Share Posted November 18, 2013 Oh. Great! Can you give me your version for SL? I'll attache it to my link of BCM5772D. Because I can't compile it since I use Mavericks. I was going to give you that instruction http://www.insanelymac.com/forum/topic/247470-bcm5722-bcm5754m-bcm5755m-bcm5787m-and-bcm5906m-nic-driver-3264-bit/?p=1932872 but I see you've already done it and that's good. -- And by the way, does it work for you? Sorry for the delay.I used xcode 3.2.6 with 0 warnings....Done testing and it works on SL ( tested 32 & 64). BCM5722D_v2.3.5_SL_UB.zip 1 Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 Sorry for the delay. I used xcode 3.2.6 with 0 warnings....Done testing and it works on SL ( tested 32 & 64). Hum I wonder which one to use, yours or the one of Alex???? GiuTor Link to comment Share on other sites More sharing options...
Onixs Posted November 18, 2013 Share Posted November 18, 2013 Hum I wonder which one to use, yours or the one of Alex???? GiuTor Mine doesnt have device id 16B3 Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 Hum I wonder which one to use, yours or the one of Alex???? GiuTor I asked rals2007 to compile the kext for those who use snow leopard. Try mine kext. Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 I asked rals2007 to compile the kext for those who use snow leopard. Try mine kext. Still the same error as in the attached pictures. I wonder where is line 226 in the Info.plist file as the grep output shows line 23. By the way, I do not want "ready to eat food". I DO wish to learn how to hack drivers as you and rals2007 are doing. Can you please point me to the guidelines? Do you have any clue? Link to comment Share on other sites More sharing options...
Onixs Posted November 18, 2013 Share Posted November 18, 2013 Still the same error as in the attached pictures. I wonder where is line 226 in the Info.plist file as the grep output shows line 23. By the way, I do not want "ready to eat food". I DO wish to learn how to hack drivers as you and rals2007 are doing. Can you please point me to the guidelines? Do you have any clue? Try this same version with edited CFBundleVersion DBCM5722versionEdited.zip Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 Still the same error as in the attached pictures. I wonder where is line 226 in the Info.plist file as the grep output shows line 23. By the way, I do not want "ready to eat food". I DO wish to learn how to hack drivers as you and rals2007 are doing. Can you please point me to the guidelines? Do you have any clue? I think it happened because I changed version from 2.3.5 to 2.3.5b. Now try this, I checked this on my computer, works. New version with your dev-id added BCM5722D.kext.zip Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 Try this same version with edited CFBundleVersion Even worse as from the attached picture: Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 <key>DTSDKBuild</key> <string>12D75</string> Maybe the reason that you have the version lower than 12D75. Then, you have two options. First, you bake kext on your own by Xcode with my promts. Second, you need to update the system. 1 Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 <key>DTSDKBuild</key> <string>12D75</string> Maybe the reason that you have the version lower than 12D75. Then, you have two options. First, you bake kext on your own by Xcode with my promts. Second, you need to update the system. First of all thank you so much indeed for your extreme kindness. I DO really appreciate the time you spending with me. I can't update 10.8.2 since I do not have any Internet connection because both networks cards are unrecognized. I will use Xcode with your prompts, thanks. I have attached the new error messagges. T H A N K S S S S S S GiuTor Link to comment Share on other sites More sharing options...
Alex009988 Posted November 18, 2013 Share Posted November 18, 2013 By the way, I don't like to use Terminal. For me, it's more easy to use kext utility.app for fixing permissions Link to comment Share on other sites More sharing options...
giutor Posted November 18, 2013 Author Share Posted November 18, 2013 By the way, I don't like to use Terminal. For me, it's more easy to use kext utility.app for fixing permissions Me too but I prefer Kext Wizard. The utility you gave me immediately start fixing as soon as I run it. I have replied with a new picture. Link to comment Share on other sites More sharing options...
Recommended Posts