Jump to content

Thinkpad T430 NVS 5400M 1GB VRAM


Uoc Nguyen
 Share

2 posts in this topic

Recommended Posts

Hello guys,

 

I'm currently running OS X Mavericks 10.9.0 on my Thinkpad T430. Almost everything work except some minor problems.

 

My laptop have 2 card:

  • Intel Ivy HD 4000: Full QE/CI
  • NVIDIA NVS 5400M (GF180M) with 1GB of VRAM: unusable

Screen resolution: 1600x900

 

I tried many ways but can not make it work:

  • Use older patched kexts: KP
  • Patch DSDT: Loaded NVIDIA Startup, Resman, GF100, show corrected info in System Information, 1GB VRAM but can not get Login screen. Error in dmesg:
NVDAStartup: Official
Apple16X50PCI22: Identified 1 Serial channels at PCI Bus=0 Dev=22 Func=3
NVDAGF100HAL loaded and registered
Previous Shutdown Cause: 5
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Apple16X50UARTSync22: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
**** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd400 ****
**** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xd400 ****
init
probe
start
DSMOS has arrived
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd400 
[IOBluetoothHCIController][start] -- completed
No interval found for . Using 8000000
[IOBluetoothHCIController::setConfigState] calling registerService
**** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x8000 -- 0x5800 -- 0xd400 ****

flow_divert_kctl_disconnect (0): disconnecting group 1
nspace-handler-set-snapshot-time: 1383677494
AppleIntelE1000e(Info): e1000e NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a
  -- power management may be incomplete or unsupported
NVDA::rmStart failed
NVDA,Display-B: Not usable
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 85
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 130
**** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd400 ****

IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 501
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 502
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 503
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 504
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 505
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 506
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 508
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 509
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 528
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 533
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 540
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 541
IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 543
 

As far as I known that old Fermi card is not working well on Mavericks even with some MacBook Pro model. But I think it can be solve with patched DSDT and binary patch for Kext.

 

I saw there are some guys have working card with Thinkpad W520 (Quadro 1000M/2000M), Thinkpad T420 (NVS 4200M).

 

Anyone has solution for this problem please share!

Thanks in advanced!

Link to comment
Share on other sites

 Share

×
×
  • Create New...