Uoc Nguyen Posted November 7, 2013 Share Posted November 7, 2013 Hello guys, I'm currently running OS X Mavericks 10.9.0 on my Thinkpad T430. Almost everything work except some minor problems. My laptop have 2 card: Intel Ivy HD 4000: Full QE/CI NVIDIA NVS 5400M (GF180M) with 1GB of VRAM: unusable Screen resolution: 1600x900 I tried many ways but can not make it work: Use older patched kexts: KP Patch DSDT: Loaded NVIDIA Startup, Resman, GF100, show corrected info in System Information, 1GB VRAM but can not get Login screen. Error in dmesg: NVDAStartup: Official Apple16X50PCI22: Identified 1 Serial channels at PCI Bus=0 Dev=22 Func=3 NVDAGF100HAL loaded and registered Previous Shutdown Cause: 5 SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode Apple16X50UARTSync22: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd400 **** **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xd400 **** init probe start DSMOS has arrived [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd400 [IOBluetoothHCIController][start] -- completed No interval found for . Using 8000000 [IOBluetoothHCIController::setConfigState] calling registerService **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x8000 -- 0x5800 -- 0xd400 **** flow_divert_kctl_disconnect (0): disconnecting group 1 nspace-handler-set-snapshot-time: 1383677494 AppleIntelE1000e(Info): e1000e NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a -- power management may be incomplete or unsupported NVDA::rmStart failed NVDA,Display-B: Not usable IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 85 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 130 **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd400 **** IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 501 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 502 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 503 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 504 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 505 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 506 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 508 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 509 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 528 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 533 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 540 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 541 IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 543 As far as I known that old Fermi card is not working well on Mavericks even with some MacBook Pro model. But I think it can be solve with patched DSDT and binary patch for Kext. I saw there are some guys have working card with Thinkpad W520 (Quadro 1000M/2000M), Thinkpad T420 (NVS 4200M). Anyone has solution for this problem please share! Thanks in advanced! Link to comment Share on other sites More sharing options...
Uoc Nguyen Posted November 8, 2013 Author Share Posted November 8, 2013 *bump*, anyone? Link to comment Share on other sites More sharing options...
Recommended Posts