crusher Posted November 3, 2013 Share Posted November 3, 2013 Please help I have a big problem via Wake after sleep.Worked until I turned off the PC and removed from power cables from my PSU. This is my proble for Wake Up.I write this command on terminal...... After sleep mode pc turn on but no picture on my monitor.Only turn off monitor. syslog |grep -i "Wake reason" -Mac-Pro kernel[0] <Debug>: Wake reason: GLAN XHC -Mac-Pro kernel[0] <Debug>: Wake reason: PXSX But after this command this message..... pmset -g Active Profiles: AC Power 2* Currently in use: standby 1 Sleep On Power Button 1 womp 1 autorestart 0 hibernatefile /var/vm/sleepimage darkwakes 0 networkoversleep 0 disksleep 10 sleep 10 (sleep prevented by coreaudiod) autopoweroffdelay 14400 hibernatemode 0 autopoweroff 1 ttyskeepawake 1 displaysleep 10 standbydelay 4200 Speedstep work greate.......Sleep work same........Please help........ Thank you.... I attach my DSDT.aml!!!!! Link to comment Share on other sites More sharing options...
crusher Posted November 4, 2013 Author Share Posted November 4, 2013 Any help please.I don't no why will to turn on monitor. Link to comment Share on other sites More sharing options...
iFIRE Posted November 4, 2013 Share Posted November 4, 2013 You have Patched AppleRTC.kext ? you AICPUPM is working? AppleLPC.kext, AppleHPET.kext, your IGPU is off in the BIOS? HAVE INSTALLED the last NVDA Kexts? Link to comment Share on other sites More sharing options...
crusher Posted November 4, 2013 Author Share Posted November 4, 2013 Yes I petched AppleRTC.kext!My AICPUPM is work!AppleLPC.kext-Yes,AppleHPET.kext-No,my IGPU is On in Bios!Don't instaled last NVDA.kext! Please send me this files and see and also my DSDT file. Thanks!!!!! Link to comment Share on other sites More sharing options...
iFIRE Posted November 4, 2013 Share Posted November 4, 2013 put the IGPU en off in the bios , AppleHPET is installed in your system, delete all AppleIntelHD* graphics kexts, repair permissions with Kext Wizard app/reboot Link to comment Share on other sites More sharing options...
crusher Posted November 4, 2013 Author Share Posted November 4, 2013 After work I could do and I'll leave the answer here.What do you think about my dsdt? Thanks.... Link to comment Share on other sites More sharing options...
crusher Posted November 4, 2013 Author Share Posted November 4, 2013 Look my speedstep workin OK Link to comment Share on other sites More sharing options...
crusher Posted November 5, 2013 Author Share Posted November 5, 2013 Look I install new OS X and work sleep and wake.On wakeup hears it my audio and turn on monitor.But after aforementioned examples below don't work. But after unplag cable on my pc don't work. Sleep and wake work but no turn on monitor. Link to comment Share on other sites More sharing options...
crusher Posted November 11, 2013 Author Share Posted November 11, 2013 Why no one will help me??????? Link to comment Share on other sites More sharing options...
slayer2333 Posted November 16, 2013 Share Posted November 16, 2013 Try this one, to make it simple when you check the wake reason for each device stated (e.g. HDEF,...) simply go into the DSDT for that specific device and delete the section: Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } DSDT.aml.zip 1 Link to comment Share on other sites More sharing options...
crusher Posted November 17, 2013 Author Share Posted November 17, 2013 Try this one, to make it simple when you check the wake reason for each device stated (e.g. HDEF,...) simply go into the DSDT for that specific device and delete the section: Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } You done it on my dsdt or not? Link to comment Share on other sites More sharing options...
slayer2333 Posted December 10, 2013 Share Posted December 10, 2013 You done it on my dsdt or not? I believe i did it on the sections showed on your console (GLAN, XHC, PXSX). You may double check. Link to comment Share on other sites More sharing options...
crusher Posted December 10, 2013 Author Share Posted December 10, 2013 I believe i did it on the sections showed on your console (GLAN, XHC, PXSX). You may double check. Yes,yes now working OK. Thank's!!! Link to comment Share on other sites More sharing options...
slayer2333 Posted December 10, 2013 Share Posted December 10, 2013 Good, enjoy ! Link to comment Share on other sites More sharing options...
Demonbane Posted June 12, 2014 Share Posted June 12, 2014 Try this one, to make it simple when you check the wake reason for each device stated (e.g. HDEF,...) simply go into the DSDT for that specific device and delete the section: Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } it remains only a problem that the external usb (mouse keyboard eg.) can't wake the computer any more Link to comment Share on other sites More sharing options...
Demonbane Posted June 12, 2014 Share Posted June 12, 2014 Try this one, to make it simple when you check the wake reason for each device stated (e.g. HDEF,...) simply go into the DSDT for that specific device and delete the section: Method (_PRW, 0, NotSerialized) { Return (GPRW (0x09, 0x04)) } and after the wake of sleep, the usb device doesn't work any more. do you have any additional way to fix that? Link to comment Share on other sites More sharing options...
iFIRE Posted June 12, 2014 Share Posted June 12, 2014 try clover and set the flags to fix USB problems Link to comment Share on other sites More sharing options...
Demonbane Posted June 12, 2014 Share Posted June 12, 2014 try clover and set the flags to fix USB problems i'm using it, the device-id was injected correctly and also the clock id... i have a auto wake problem after sleep, and with GenericUSBXHCI + gux_defer_usb2, i also had some shutdown bugs.. so i tried to delete the _PRW method, i don't think it's a good idea, but no other choices... Link to comment Share on other sites More sharing options...
Recommended Posts