frathebest Posted October 11, 2013 Share Posted October 11, 2013 Hi guys I am italian so sorry for my english. I have an HP dv7 7399el with this specifics: Intel Core i7-3630QM 2.4GHz - 3.4GHz (Macbook Pro Retina have i7-3635QM 2.4GHz which is the same i think red Intel website) Chipset HM77 ( same of MBPR ) Ram 16GB 1600MHz 2x8GB ( same of MBPR ) Intel HD 4000 ( same of MBPR ) nVidia GT635M 2GB ( MBPR have GT650, I think it is possible to work ) Wifi and bluetooth Ralink RT3290 b\g\n ( I don't know ) Sound Monster Beats 4.1 Webcam HP TrueVision HD Touchpad Synaptics multitouch HDD 1TB Hitachi ( that i'll replace with ssd 120GB or 250GB) I have a UEFI Bios. I try iAtkos ML2 and it boot so fast with cpus=1 flag but in disk utility there isn't the hard disk! The UEFI is set to secure boot disabled and legacy boot enabled. I try ML3U ( for pc that have uefi system ) but after I select the USB drive with the installer I see one black screen and nothing else, of course i can't write any flag. I think also to modifly Vanilla Installer but at the moment I haven't any idea on how I can do. At the moment i have HP Windows 8 64bit Can anyone HELP ME???? Thanks in advance! Link to comment Share on other sites More sharing options...
dcai777 Posted October 11, 2013 Share Posted October 11, 2013 enable ahci for sata in the bios/uefi... Link to comment Share on other sites More sharing options...
frathebest Posted October 12, 2013 Author Share Posted October 12, 2013 Dear dcai777, I'm not a newbie ahah, in the UEFI there aren't any other option exception done for secure boot and legacy mode... so now ? Link to comment Share on other sites More sharing options...
b1gdadd1 Posted October 12, 2013 Share Posted October 12, 2013 hi mr frathebest! i do not wish to come across as a TROLL but the fact that you use iAtkos makes you a newbie. the use of distros like iAtkos is discouraged because you can not tell exactly how the installation of OS X on your machine was done. but if you insist to use iAtkos then i suggest that you go to their forum and ask for their help. however, if you are really serious in installing OS X, then check the notebook installation guide here or the vanilla installation here. best of luck mr frathebest! Link to comment Share on other sites More sharing options...
frathebest Posted October 12, 2013 Author Share Posted October 12, 2013 Ahahah I'm newbie. However In Notebook Installation I didn't find a solution but yesterday I found some guide and the vanilla installation that you post also, I'll try and I post the results. Thanks to All Link to comment Share on other sites More sharing options...
frathebest Posted October 13, 2013 Author Share Posted October 13, 2013 The Vanilla Installer Don't see my hard disk too. How I can do ?! Link to comment Share on other sites More sharing options...
b1gdadd1 Posted October 13, 2013 Share Posted October 13, 2013 can you get an ubuntu cd live? run ubuntu and when it boots to desktop open a terminal and type lspci -nn > ~/Desktop/lspci.txt then upload lspci.txt here. i want to see in what mode your sata controller is in. Link to comment Share on other sites More sharing options...
frathebest Posted October 14, 2013 Author Share Posted October 14, 2013 (edited) YEEESSS I replace the kext AppleAHCI in S/L/E in USB and it work whitout any problem. Now there are a lot of new matter! Without any kext exception for NullCPUPowerManagement and FakeSMC the system work. I continue the guide but: Chameleon don't work ( boot0 error) I try to install other bootloader but nothing so i must boot with the usb; Intel HD 4000 don't work. IT's strange! GT635M don't work. I try with graphicsEnabler yes and no, nvbios, patch and others but no solution! I deleted the NullCPUPowerManagement and raplace it with a patched AppleIntelCPU but the processor in my opinion work bad! I alway listen the fun and the PC is hot! I tried SMBios of MBPR 10 and the MBP 9.2 but nothing change. The Ram and the speed and name of the Cpu is correct, only cache L3 is 768kb !? not 6MB the USB work but i can see only HFS+ disks and I don't know why. The exFat don't work too. The trackpad work with a PS2 kext but i think it isn't OK and work only the "click" by bouton not by touchpad and also the multitouch The wifi and blutooth NO The Audio i try voodoo with no results and patched Apple HD Audio kext but nothing. dsdt editor and system info say an error like java se 6 i think i must download with apple software update but is impossible. Mac don't see the battery! I forgot: I can boot only in -x mode, without this flag... the system don't start I deleted all the nvidia kext and now system boot witouth any flag! Edited October 14, 2013 by frathebest Link to comment Share on other sites More sharing options...
Recommended Posts