Jump to content

Ozmosis


xpamamadeus
6,231 posts in this topic

Recommended Posts

This seems like something that should wait for official ozmosis release to me. Ive followed all the hacking you've done so far with the quo firmware and I'm glad you've helped people on how to extract what they need to use this but it doesn't seem right to take it to this level. It would seem wise to wait for official open source to know exactly what is involved with the ozmosis boot loader.

  • Like 2
Link to comment
Share on other sites

I'm going to give this a go on Asus P8H77-M LE

I also use OS X without EmuVariable so it should work.

I'll post results and built binaries

  • Like 1
Link to comment
Share on other sites

Here you go...

An Ozmosis firmware for P8H77-M LE.

I tested it and it works.

 

You can flash it using FTK under Windows or the new DPCIManager (which uses flashrom) under OS X.

 

Alternatively you can download it here:

https://www.dropbox.com/s/8mz31poubfk1vof/P8H77MLE_Ozmosis.zip

 

PMPatch is applied on the BIOS.

It also has mods for Asus SLIC and custom LAN MAC address (de:ad:ba:be:c0:de)

 

Enjoy :D

P8H77MLE_Ozmosis.zip

  • Like 3
Link to comment
Share on other sites

is it safe to completely remove CORE_DXE if i never want to run windows again if needed i have other rigs for that thx

Link to comment
Share on other sites

Has anyone tried it with Asus boards? I have two (see sig) and am curious about this. I can open the rom and cap files in MMTOOL and seem to be able to add/remove modules OK. Just haven't tried going the whole way and rolling a bios to flash.

 

Also, I'm not sure if either of these boards store NVRAM variables correctly (I use Chameleon on both).

Link to comment
Share on other sites

Has anyone tried it with Asus boards? I have two (see sig) and am curious about this. I can open the rom and cap files in MMTOOL and seem to be able to add/remove modules OK. Just haven't tried going the whole way and rolling a bios to flash.

 

Also, I'm not sure if either of these boards store NVRAM variables correctly (I use Chameleon on both).

I have, and Asus uses AMI Aptio UEFI BIOS so it should work. :D

Link to comment
Share on other sites

Anyone missing the GUI of Clover, can now use rEFInd with OZmosis

And the settings can be done by pressing the home button during boot.

Tested this, it works...

Link to comment
Share on other sites

Does anyone know which fakeSMC was packaged in the original Ozmosis H3A release?

 

For some reason I am seeing 1.0.0.d1 and that may cause issues down the road.

 

If you are running a vanilla install on H3A with no bootloaders, could you let me know which version you have running? You can do so by: 

kextstat | grep -v com.apple
  • Like 1
Link to comment
Share on other sites

 

Does anyone know which fakeSMC was packaged in the original Ozmosis H3A release?

 

For some reason I am seeing 1.0.0.d1 and that may cause issues down the road.

 

If you are running a vanilla install on H3A with no bootloaders, could you let me know which version you have running? You can do so by: 

kextstat | grep -v com.apple

Sry man but we are not using QUO board,soo cannot help with that.

Link to comment
Share on other sites

Sry man but we are not using QUO board,soo cannot help with that.

 

No worries.

 

I assumed that with the files you discussed above, you might have been in the loop or involved in the ozmosis project. Im still catching up with being off the forums for four or five years.

 

Apart from this and the quo board thread, is there another forum or thread that you are aware of that discusses ozmosis or provides source?

 

I have a few other UEFI boards around. I might give your guide a try as well.

Link to comment
Share on other sites

No worries.

 

I assumed that with the files you discussed above, you might have been in the loop or involved in the ozmosis project. Im still catching up with being off the forums for four or five years.

 

Apart from this and the quo board thread, is there another forum or thread that you are aware of that discusses ozmosis or provides source?

 

I have a few other UEFI boards around. I might give your guide a try as well.

I am not involved in Ozmosis in any way.

Dont know for any place that we can talk about ozmosis,if u find one plz share here.

 

Try this guide if u like and share how it goes for u.

Link to comment
Share on other sites

I have, and Asus uses AMI Aptio UEFI BIOS so it should work. :D

 

I set about injecting modules in to my Z68 BIOS but then realised that in order to have this a fully functioning "hack" BIOS (AppleHDA excluded) I'd also have to replace the DSDT.

 

This got me wondering if the usual DSDT hacks (like device renames and HDEF/HDMI/SBUS injection) would have any adverse effects on a Windows dual-boot.

 

I'm leaning towards staying with Chameleon as it's more flexible in these situations, but it's still really cool to think that it's possible to have everything rolled into the BIOS.

Link to comment
Share on other sites

Kudos to Xpamamadeus for your initial and continued work with Ozmosis and to the other guys who appear to have contributed a great deal and I am referring to Stlvnub and AnV, and others too numerous to mention.

 

A great way to go and I might have a go one day on my Asus Z88.

 

Great work guys - it is amazing what can be achieved, when you set your mind to it.

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...