robertocoriglione Posted August 28, 2013 Author Share Posted August 28, 2013 R-Drive not open it... "Patch 'D:\109dp6.arc' is not valid" Unfortunately I don't have enought time to hack. At this point I prefer to wait for the stable version of 10.9 to install in the future... If I have a news I write in this topic. Thank you for your help! Link to comment Share on other sites More sharing options...
robertocoriglione Posted August 29, 2013 Author Share Posted August 29, 2013 NEWS! I have tried to install Clover on iAtkos ML2 with MBR. Installation is ok, but when I start mac os, after the loading, the screen become black and the pc restarts... Any idea? Link to comment Share on other sites More sharing options...
Alex009988 Posted August 29, 2013 Share Posted August 29, 2013 After you pressed on icon of system at the Clover, PC restarts, right? Try Clover-BiosBlockIO, tick it off at the pkg. You can show your config.plist. Link to comment Share on other sites More sharing options...
robertocoriglione Posted August 29, 2013 Author Share Posted August 29, 2013 the problem was that i need npci=0x2000... How can I add it? now i have this: I have only the name of GPU, but no QE/CI... Link to comment Share on other sites More sharing options...
Alex009988 Posted August 29, 2013 Share Posted August 29, 2013 <key>boot‐args</key> <string>npci=0x2000</string> Show your config.plist Link to comment Share on other sites More sharing options...
robertocoriglione Posted August 29, 2013 Author Share Posted August 29, 2013 My config.plist is egual to this: http://www.insanelymac.com/forum/topic/291276-help-ati-mobility-radeon-hd-4570-doesnt-work/?p=1940068 Only modify is my "smbios"... Link to comment Share on other sites More sharing options...
Alex009988 Posted August 29, 2013 Share Posted August 29, 2013 <key>Graphics</key> <dict> <key>Graphics</key> <dict> <key>InjectATI</key> ............... </dict> </dict> I did a mistake there. Delete one <key>Graphics</key> </dict> and <dict> Below. Sorry about that. Link to comment Share on other sites More sharing options...
robertocoriglione Posted August 29, 2013 Author Share Posted August 29, 2013 I have to install any kexts about graphics? Link to comment Share on other sites More sharing options...
Alex009988 Posted August 29, 2013 Share Posted August 29, 2013 No, but you must patch framebuffer at AMD4600Controller. Link to comment Share on other sites More sharing options...
Alex009988 Posted August 29, 2013 Share Posted August 29, 2013 And dodn't forget to add your ID <key>IOPCIMatch</key> <string>0x94901002 0x94881002 0x95531002</string> Link to comment Share on other sites More sharing options...
robertocoriglione Posted August 29, 2013 Author Share Posted August 29, 2013 Ok, I do it! Now when the system boot, after the boot logo, the screen become white and after few second become black. I have patch fb with this: http://www.insanelymac.com/forum/topic/291276-help-ati-mobility-radeon-hd-4570-doesnt-work/?p=1939688 ----EDIT1---- I have tryed this fb (http://www.insanelymac.com/forum/topic/291276-help-ati-mobility-radeon-hd-4570-doesnt-work/?p=1939923) and I have this: ----EDIT2---- http://www.insanelymac.com/forum/topic/291276-help-ati-mobility-radeon-hd-4570-doesnt-work/?p=1940068 I have tried to change the red number with 00 / 01 / 02 / 03... But I have the same situation of image Link to comment Share on other sites More sharing options...
Alex009988 Posted August 30, 2013 Share Posted August 30, 2013 <key>Graphics</key><dict><key>InjectATI</key><true/><key>VRAM</key><integer>512</integer><key>LoadVBios</key><true/><key>InjectEDID</key><true/><key>VideoPorts</key><integer>2</integer><key>FBName</key><string>Shrike</string> <key>DualLink</key> <integer>0</integer> </dict> Try to add DualLink=0. EDIT 1 <key>LoadVBios</key><false/> Also try it so with Dual-link 0 or 1. Maybe Vbios is superfluous. Link to comment Share on other sites More sharing options...
robertocoriglione Posted August 30, 2013 Author Share Posted August 30, 2013 YESSSSSSSS!!!!!!!!!! I have only add DualLink=0 and now it WORK!!!!!!!! You are a genius! Thank you very much!! EDIT: The external monitor doesn't work... Is possible to enable it? Link to comment Share on other sites More sharing options...
Alex009988 Posted August 30, 2013 Share Posted August 30, 2013 Check your Display Sleep. And check DVDPlayer, namely put DVD Disk into computer or try to watch a movie. and see if the program crashes. Check VGA. http://www.insanelymac.com/forum/topic/287995-how-to-launch-ati-card-by-dsdt/?p=1908542 If all of them work it means graphics works well. Also you can get rid of NullCPUPowerManagement and other crutches. 02000000 40000000 0900 0000 12 04 00 07 (LVDS) 10000000 10000000 0000 0000 00 10 01 01 (VGA) 00000000 00000000 0000 0000 00 00 00 00 (-) Check VGA with that framebuffer, or use it in any case and even if you don't have equipment to check it. Link to comment Share on other sites More sharing options...
robertocoriglione Posted August 30, 2013 Author Share Posted August 30, 2013 It's my mistake... I just had to reboot with the monitor connected... Can I hide some partition in clover? Link to comment Share on other sites More sharing options...
Alex009988 Posted August 30, 2013 Share Posted August 30, 2013 It's my mistake... I just had to reboot with the monitor connected... Can I hide some partition in clover? Yes. you can, just show you mine. I think you'll understand it. <dict> <key>GUI</key> <dict> <key>DebugLog</key> <false/> <key>HideEntries</key> <dict> <key>Duplicate</key> <false/> <key>ExternalUEFI</key> <false/> <key>Gentoo</key> <false/> <key>Grub</key> <false/> <key>InternalUEFI</key> <true/> <key>OSXInstall</key> <false/> <key>OpticalUEFI</key> <false/> <key>Recovery</key> <false/> <key>Ubuntu</key> <false/> <key>WindowsEFI</key> <false/> </dict> <key>Mouse</key> <dict> <key>Enabled</key> <true/> <key>Speed</key> <integer>4</integer> </dict> <key>Theme</key> <string>orange</string> <key>Timeout</key> <integer>5</integer> <key>Volumes</key> <dict> <key>Hide</key> <array> <string>HD(1,MBR,0x6A8451AC,0x800,0x1800000)</string> <string>HD(2,MBR,0x6A8451AC,0x1800800,0x700000)</string> <string>HD(4,MBR,0x6A8451AC,0x1F32800,0x48925000)</string> <string>HD(1,MBR,0x6A84517B,0x349D1000,0x15E86000)</string> </array> <key>Legacy</key> <string>First</string> </dict> </dict> Do darwin dumper and tick Firmware log off and find HD(...... Link to comment Share on other sites More sharing options...
pimpao Posted January 12, 2014 Share Posted January 12, 2014 I'm setting up an Acer Aspire 5738ZG with the same GPU ( Mobility Radeon HD4570 ). Can you summarize the process and provide the files I'll need to make my GPU works ? Link to comment Share on other sites More sharing options...
robertocoriglione Posted January 13, 2014 Author Share Posted January 13, 2014 I have add my ID in the info.plist of ATI4600.kext and the framebuffer (given me by Alex). After I have installed Clover ed configured to load my VBIOS... Link to comment Share on other sites More sharing options...
pimpao Posted January 16, 2014 Share Posted January 16, 2014 I've it running. I placed my vbios on the ROM folder, patch the FB, and also add deviceid to the controller.kext. and then I'd setup Clover configurator, it kinda works, but I don'r know why everytime I go to the maps app the computer break. Only cursor move, nothing more happens and I can't do anything.. Link to comment Share on other sites More sharing options...
82posh82 Posted July 10, 2014 Share Posted July 10, 2014 hi, with maverick 10.9 work good, but I install maverick 10.9.4 and don't work in full resolution, why? thank you Link to comment Share on other sites More sharing options...
aliveli1512 Posted December 15, 2019 Share Posted December 15, 2019 Is it possible to enable HDMI? Link to comment Share on other sites More sharing options...
Recommended Posts