lesley1337 Posted August 5, 2013 Share Posted August 5, 2013 After some hard work, *almost* everything is working as it should now. The only thing I haven't looked at yet is the NEC USB 3.0 port. Maybe when I have time. System specs: Manufacturer: Packard Bell (Acer) CPU: Intel Core i7-2630QM @ 2.00 GHz RAM: 4GB DDR3 1333 Mainboard: Packard Bell SJV70_HR (highly unknown) Graphics: ATI Radeon HD 6650M 1GB Storage: Intel 320 Series 120GB (SSD) + 640 GB HDD Ethernet: Atheros AR8151 WiFi: Atheros 9287 Sound: Realtek ALC269 Trackpad: Synaptics - running OS X Mountain Lion 10.8.4 - Everything listed above works as it should, or at least as far as I tested. - Power management should be fine (SSDT, MSRDumper reports correct stepping) - Sleep works - Cosmetic issue: Ethernet shows "connected" even if no cable is plugged in, with no IP assigned - HDMI port worked with my TV (HDMI -> HDMI), but not with my PC monitor (HDMI -> DVI). No idea why. - Internal mic probably doesn't work, haven't tested precisely. - DSDT+SSDT dumped from Linux, DSDT patches applied: Core i* Sandy Bridge, Audio, GFX - Takes ~11 seconds to boot (BIOS POST not included) If you have a similar system, just ask if you need instructions or kexts whatever. Link to comment Share on other sites More sharing options...
Recommended Posts