DSDOSX Posted July 23, 2013 Share Posted July 23, 2013 Boa noite a todos mudei minha estacao para essa placa ainda nao tenho o teclao configurado por isso a falta do acentos, mais esse nao e o problema gostaria de solicitar uma ajuda para ter as funcoes funcionando no meu hack novo o sistema ja esta funcionando so que nao possuo dsdt ainda da mesma placa pois pelo que pesquisei por ela ser UEFI nao precisaria de DSDT nao sei se e certo isso, o que tenho na minha EXtra e isso Extrab76md3h.zip fiz a instalacao com o pen do myhack e instalei apenas as kext comuns mais acho que a instalacao do myhack colocou a null la pois nao tenho mais essa kext e meso assim ela carrega, fiz minha tabela SSDT no app MACAISL foi gerado sem erros e colocada na extra e pelo que vi no HWSensor os states ent'ao funcionando pelo menos 2 Gostaria de saber o que devo fazer ou editar para ter Sleep e Gerenciamento de energia correto j[a que aparentemente seria mais facil com essa config, na bios esta padrao Sata AHCI e tudo no padrao UEFI Link to comment Share on other sites More sharing options...
artur_pt Posted July 24, 2013 Share Posted July 24, 2013 olá o myhack instala uma kext , k tem a nullcpu entre outras vê o k ele instalou, ou pode estar numa extensions.mkext sobre o uefi tens de usar Clover chameleon so faz boot em modo legacy bom hack Link to comment Share on other sites More sharing options...
DSDOSX Posted July 24, 2013 Author Share Posted July 24, 2013 Grande artur blz irmao, cara nunca instalei o clover tem algum pkg ou dmg dele??? como faço essa instalação devo alterar alguma coisa no processo de instalação ou o clover ja faz tudo? e e verdade que não preciso de DSDT nessa placa so usar o SSDT para gerenciamento? Link to comment Share on other sites More sharing options...
artur_pt Posted July 24, 2013 Share Posted July 24, 2013 olá sobre clover tens de ler sobre ele... http://sourceforge.net/projects/cloverefiboot/?source=navbar Multi boot em UEFI com Clover Clover v.2 Instructions http://clover-wiki.zetam.org/Content tenta instalar numa pen para testar e depois quando tiver 100% instalas no hd bom hack Link to comment Share on other sites More sharing options...
DSDOSX Posted July 26, 2013 Author Share Posted July 26, 2013 Bem artur com o clover naáo consigo agora to tentando instalar com o myhack 3.2 b8 e nao rola fez a instal;ao mais nao inicia depois fica travado depois que reconhece o hd mesmo utilizando -v -f PCIRootUID=0 Link to comment Share on other sites More sharing options...
DSDOSX Posted July 26, 2013 Author Share Posted July 26, 2013 pensei que ia ser mais facil com essa placa Link to comment Share on other sites More sharing options...
artur_pt Posted July 26, 2013 Share Posted July 26, 2013 olá desativaste na bios a grafica onboard k está no cpu ? bom hack Link to comment Share on other sites More sharing options...
DSDOSX Posted July 26, 2013 Author Share Posted July 26, 2013 sim e ja testei on e off , qual seria a melhor forma de instalar essa placa para ter tudo funcionando no ML o myhack e o mais indicado eu baixei um dvd pronto no Olarila com clover mais boota e não entra na instalação carrega ate aparece a tela cinza antes de escolher o idioma e para ali,na bios so mudeia a sata ahci e o boot para uefi and legay Link to comment Share on other sites More sharing options...
DSDOSX Posted July 26, 2013 Author Share Posted July 26, 2013 Novidades artur consegui fazer a instalação com o usb criado a partir do dvd que baixei la do olarila, agora ele para no reconhecimento das usbs algo do tipo appleusbeih alguma coisa eu bati uma foto vou postar assim que der ta no celular Link to comment Share on other sites More sharing options...
artur_pt Posted July 26, 2013 Share Posted July 26, 2013 olá deve ser as usb 3 tenta usar esta kext GenericUSBXHCI_1.2.4.tar.gz bom hack Link to comment Share on other sites More sharing options...
DSDOSX Posted July 27, 2013 Author Share Posted July 27, 2013 boas nova artur,achei aparentemente o problema, atualizei a bios para a f14 e o sistema subiu com a pen que fiz do dvd de instala;'ao do 10.8.4 feita la no olarila, e um dvd puro ja atualizado, logo apos instalei o cloover na maquina para ter os arquivos de boot e copiei a pasta EFI substituindo a do hd pela da pen ta subindo e parece que tenho algum gerenciamento pois deu sleep e voltou instalei agora a fake pra ter os sensores pois nao tinha peguei no oxs86 agora tenho que aprender a alterar o config do clover pois e diferente e vi que subindo -v tem erros nos states mais nao sei onde vejo o log para te mandar instalei a rede realteck e uma applehda 887 para o som e agora a fakesms so essas 3 ate agora o resto ta pelo clover PS: Fakes ok subiu normal agora tenho uma atualização do firmware do thunderbold que nao instala fica la o tempo todo pedindo pra atualizar mais minha maquina nao tem o thunder como tirar ela de la pois demora pakas para reiniciar e desligar pois tenta instalar toda vez que mando desligar e reiniciar, os erros de states ainda sao apresentados no modo -v mais nao sei como tem enviar pois nao acho o log do clover Link to comment Share on other sites More sharing options...
DSDOSX Posted July 27, 2013 Author Share Posted July 27, 2013 O cpu reconhece como 4 core sendo que ele e quad com mais 4 virtuais no windows ele ereconhece como 8 tenho que fazer alguma altera;áo ou e assim mesmo? Link to comment Share on other sites More sharing options...
DSDOSX Posted August 10, 2013 Author Share Posted August 10, 2013 Artur tem como vc me fazer um favor ve se tem algo para acertar no meu hack rodei o comando no terminal e ele me voltou isso PMAP: PCID enabled PMAP: Supervisor Mode Execute Protection enabled Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 vm_page_bootstrap: 3904972 free pages and 256564 wired pages kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 TSC Deadline Timer supported and enabled corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS AES ECB AESNI POST test passed! corecrypto.kext FIPS AES XTS AESNI POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] PFM64 (36 cpu) 0xf80000000, 0x80000000 AppleIntelCPUPowerManagement: Turbo Ratios 3455 AppleIntelCPUPowerManagement: (built 18:11:47 May 1 2013) initialization complete HWSensors Project Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved. waitForSystemMapper Backtrace 0xffffff802505204f 0xffffff8025051bc9 0xffffff8025051b30 0xffffff7fa61c0a59 0xffffff7fa61c0715 0xffffff80250311bc 0xffffff802502d400 Kernel Extensions in backtrace: org.netkas.driver.FakeSMC(489.0)[ED06D2B1-5774-3369-8C97-3C152578ED19]@0xffffff7fa61bc000->0xffffff7fa61ccfff dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xffffff7fa5d5e000 [ PCI configuration begin ] FakeSMCDevice: 15 preconfigured keys added FakeSMCDevice: 5 keys exported by Clover EFI SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x3a, stepping 0x9, cores 4, threads 8, TJmax 105 CPUSensors: setting platform to d8 mbinit: done [128 MB total pool size, (85/42) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 956D247C-EBF8-356A-A787-4AA3D5637F00 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready PCI configuration changed (bridge=1 device=0 cardbus=0) [ PCI configuration end, bridges 5 devices 12 ] HDAEnabler: Copyright © 2008 by Kabyl HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga SuperIODevice: found ITE IT8728F on port=0x2e address=0xa30 IT87xxSensors: started GeForceSensors (pci1@0): chipset: G96 (NV96) bios: 62.94.73.00 GeForceSensors (pci1@0): started Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleIntelPchSeriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/SAMSUNG HD502IJ Media/IOGUIDPartitionScheme/Sem T\M-C\M--tulo 1@2 BSD root: disk0s2, major 1, minor 2 Kernel is LP64 HDAEnabler: Copyright © 2008 by Kabyl NVDAStartup: Official Previous Shutdown Cause: 5 [broadcomBluetoothHCIControllerUSBTransport][start] -- completed NVDANV50HAL loaded and registered HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga Waiting for DSMOS... macx_swapon SUCCESS DSMOS has arrived [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification [iOBluetoothHCIController][start] -- completed AppleRTL8169Ethernet: Ethernet address 90:2b:34:f3:18:98 X86PlatformPlugin::setRingTable - No ring table found! X86PlatformPlugin::configResourceHandler - Failed to set ring table! [iOBluetoothHCIController::setConfigState] calling registerService [sendHCIRequestFormatted] ### ERROR: [0xFD08] (Broadcom VSC -- Change LNA Gain Coex sECI) -- Send request failed (err = 0x0001 (kBluetoothHCIErrorUnknownHCICommand)) [AGPM Controller] unknownPlatform NTFS driver 3.10 [Flags: R/W]. NTFS volume name Reservado pelo Sistema, version 3.1. NTFS volume name , version 3.1. NTFS-fs warning (device /dev/disk1s2, pid 109): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk. NTFS volume name Filmes, version 3.1. NTFS volume name Musicas, version 3.1. NTFS volume name Videos, version 3.1. NTFS volume name Games, version 3.1. NTFS volume name Works, version 3.1. NTFS volume name Dados, version 3.1. NTFS volume name Programas, version 3.1. CODE SIGNING: cs_invalid_page(0x1000): p=227[ksadmin] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=244[ksadmin] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=260[GoogleSoftwareUp] clearing CS_VALID considerRebuildOfPrelinkedKernel com.apple.driver.AppleGraphicsControl triggered rebuild Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 CODE SIGNING: cs_invalid_page(0x1000): p=579[ksadmin] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=583[ksadmin] clearing CS_VALID Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 0 [Time 1376094886] [Message Wake reason: GLAN EHC2 PXSX (Network) RTC: PowerByCalendarDate setting ignored Previous Sleep Cause: 5 The USB device HubDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by issuing a remote wakeup (2) The USB device DELL USB Keyboard (Port 6 of Hub at 0x1a100000) may have caused a wake by issuing a remote wakeup (3) HID tickle 235 ms Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -548590969600, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 Sandbox: xpcd(202) deny ipc-posix-shm-read-data /tmp/com.apple.csseed.75 CODE SIGNING: cs_invalid_page(0x1000): p=633[GoogleSoftwareUp] clearing CS_VALID NTFS volume name Expansion Drive, version 3.1. Link to comment Share on other sites More sharing options...
Pimentel Posted August 10, 2013 Share Posted August 10, 2013 Olá camarada. O cpu reconhece como 4 core sendo que ele e quad com mais 4 virtuais no windows ele ereconhece como 8 tenho que fazer alguma altera;áo ou e assim mesmo? Isso é normal. O mac só msotra os cores reais, os theads ficam em oculto. Mas ele usa tanto os cores como os theads. Desculpa por não ajudar no Clover só tenho experiência no Chameleon. Só passei para te esclarecer isso. Creio que o artur deve estar um pouco ocupado esses dias. Uma pena, pois ele é quem entende no momento no fórum português mais acerca do Clover. Link to comment Share on other sites More sharing options...
DSDOSX Posted August 10, 2013 Author Share Posted August 10, 2013 opa que issso obrigado pela ajuda ela sempre e bem vinda, que bom que esta certo, eu mandei por artur pq sempre e ele que salva ainda mais agora que to usando o clover, e pq vi algumas msg de erro e queria saber se e preocupante mais obrigado assim mesmo, vou esperar se mais alguem souber do clover aparecer, senao vou ter que me aventurar no forum gringo daqui abç Link to comment Share on other sites More sharing options...
artur_pt Posted August 12, 2013 Share Posted August 12, 2013 olá quanto ao cpu AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled depois tens muitas msg da applehda - sound assertion tenta usar outra... uma + atual [iOBluetoothHCIController::setConfigState] calling registerService [sendHCIRequestFormatted] ### ERROR: [0xFD08] (Broadcom VSC -- Change LNA Gain Coex sECI) -- Send request failed (err = 0x0001 (kBluetoothHCIErrorUnknownHCICommand)) aqui possivelmente também tens problemas quanto ao clover os log são gerados pelos scripts que devem ser instalados pelo instalador do clover... e podes vê-los pela console do sistema tão em Clover O clover tenta ir por partes.. no config estão várias seções .. CPU, Graficos e por ai alem ve neste link o k faz cada comando.. e testes e + testes http://clover-wiki.zetam.org/Contents tenta começar a eliminar as msg e debruçar no clover sobre os problemas que te pareça que a tua config tenha.. e sobre a tua bios bom hack Link to comment Share on other sites More sharing options...
DSDOSX Posted August 17, 2013 Author Share Posted August 17, 2013 Vlw vou daruma olhada e se tiver dúvidas te falo Link to comment Share on other sites More sharing options...
DSDOSX Posted August 25, 2013 Author Share Posted August 25, 2013 fala ai artur nao achei muita coisa de como acertar as coisas entao peguei o clover configurator, a parte do smbios ja fiz agora a parte do cpu nao entendi e fiquei meio cabreiro de colocar coisa errada na tela tem os campos CPU Frequency MHz que no meu caso acho que seria 3400 velocidade normal do cpu a de turbo e 3900 mais nao tem essa opicao dentro co clover configurator entao seria 3400 mesmo eu acho Bus Speed KHz esse eu nao sei quanto e o DMI do CPU e 5000 mais nao sei se e isso QPI nao sei o que entao nao tenho valores Processor Type e o codigo o processador que a Apple da eu nao sei onde achar caso tenha mais alguma informacao para me dar ou indicar eu tirei os dados desse site da intel http://ark.intel.com/pt-br/products/65719 quanto aos outros erros que mencionei ainda nao vi quero resolver primeiro o cpu e ir por partes e mais uma vez obrigado Link to comment Share on other sites More sharing options...
artur_pt Posted August 26, 2013 Share Posted August 26, 2013 olá com a config.plist minima tenta fazer o boot quando conseguires fazer o boot corre este script que vai gerar um config.plist e é nesse k tens de mexer... http://olarila.com/forum/download/file.php?id=3686 cd ~/Downloads/GetCloverConfig ./genconfig >config.plist bom hack Link to comment Share on other sites More sharing options...
DSDOSX Posted August 26, 2013 Author Share Posted August 26, 2013 Blz vou fazer e te dou um alo Link to comment Share on other sites More sharing options...
DSDOSX Posted August 28, 2013 Author Share Posted August 28, 2013 artur rodei o script gerou esse ai, com base no que estava subindo deixei dessa forma e alterei o valor do cpu para 3400 que e o valor correto dele agora acho que tem coisa errada ainda pois ola essa tela e normal esses valores Arquivar.zip arquivos para analisa com base nessa informação na pagina fala que o dmi e 5 gt/s e detro do sobre fala isso Velocidade de Conexão do Processador: 400 MT/s esta certo isso? os valores estao certo no config.plist, dessa forma ta subindo com tudo ok so essas informações que acho que tem algo errado pois o cpu estava marcando 3.39 dai eu coloquei 3400 na config e ele passou a aparecer 3.4 esse cpu tem turbo por isso ta acionado dentro da config ele vai ate 3.9 Link to comment Share on other sites More sharing options...
artur_pt Posted August 28, 2013 Share Posted August 28, 2013 olá ali unico valor k tens de mexer é no QPI = 5000 5GT de resto me parece bem e veres no sobre o meu mac + info de memória se está tudo bem.. e testares se o sistema está estável depois veres o acpi e gerares os states tem uma chave para gerar os states nos ivy... bom hack Link to comment Share on other sites More sharing options...
DSDOSX Posted August 31, 2013 Author Share Posted August 31, 2013 Chave no propro clover ou em outro lugar Link to comment Share on other sites More sharing options...
DSDOSX Posted August 31, 2013 Author Share Posted August 31, 2013 achei a chave no clover configurator mais ao marcar ela aparece outras coisas marcadas marquei e reinicei subiu como saber agora se ta ok? Ficou mais lento apos ativar isso olha o ds PMAP: PCID enabled PMAP: Supervisor Mode Execute Protection enabled Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 vm_page_bootstrap: 4016536 free pages and 145000 wired pages kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 TSC Deadline Timer supported and enabled corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS AES ECB AESNI POST test passed! corecrypto.kext FIPS AES XTS AESNI POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] AppleIntelCPUPowerManagement: Turbo Ratios 3455PFM64 (36 cpu) 0xf80000000, 0x80000000 [ PCI configuration begin ] AppleIntelCPUPowerManagement: (built 18:11:47 May 1 2013) initialization complete HWSensors Project Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved. FakeSMCDevice: 15 preconfigured keys added FakeSMCDevice: 5 keys exported by Clover EFI SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x3a, stepping 0x9, cores 4, threads 8, TJmax 105 CPUSensors: setting platform to d8 PCI configuration changed (bridge=1 device=0 cardbus=0) [ PCI configuration end, bridges 5 devices 12 ] mbinit: done [128 MB total pool size, (85/42) split]HDAEnabler: Copyright © 2008 by Kabyl HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 956D247C-EBF8-356A-A787-4AA3D5637F00 com.apple.AppleFSCompressionTypeZlib kmod start com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib load succeeded com.apple.AppleFSCompressionTypeDataless load succeeded AppleIntelCPUPowerManagementClient: ready SuperIODevice: found ITE IT8728F on port=0x2e address=0xa30 IT87xxSensors: started Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> GeForceSensors (pci1@0): chipset: G96 (NV96) bios: 62.94.73.00 GeForceSensors (pci1@0): started Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleIntelPchSeriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/SAMSUNG HD502IJ Media/IOGUIDPartitionScheme/Sem T\M-C\M--tulo 1@2 BSD root: disk0s2, major 1, minor 2 Kernel is LP64 HDAEnabler: Copyright © 2008 by Kabyl NVDAStartup: Official Previous Shutdown Cause: 5 [broadcomBluetoothHCIControllerUSBTransport][start] -- completed NVDANV50HAL loaded and registered DSMOS has arrived [iOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification [iOBluetoothHCIController][start] -- completed X86PlatformPlugin::setRingTable - No ring table found! X86PlatformPlugin::configResourceHandler - Failed to set ring table! Failed to find sleep policy for this platform! Disabling deep sleep. X86PlatformShim::sendStepper - Stepper dictionary from plist is NULL! X86PlatformShim::start - Failed to send stepper Standby delay is not specified! Defaulting to 0x1068 ErP Timer is not specified! Defaulting to 0x3840 [iOBluetoothHCIController::setConfigState] calling registerService Standby delay is not specified! Defaulting to 0x1068 ErP Timer is not specified! Defaulting to 0x3840 Standby delay is not specified! Defaulting to 0x1068 ErP Timer is not specified! Defaulting to 0x3840 Standby delay is not specified! Defaulting to 0x1068 ErP Timer is not specified! Defaulting to 0x3840 Standby delay is not specified! Defaulting to 0x1068 ErP Timer is not specified! Defaulting to 0x3840 NTFS driver 3.10 [Flags: R/W]. NTFS volume name Reservado pelo Sistema, version 3.1. HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga NTFS volume name , version 3.1. NTFS-fs warning (device /dev/disk1s2, pid 39): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk. NTFS volume name Filmes, version 3.1. NTFS volume name Musicas, version 3.1. NTFS volume name Videos, version 3.1. NTFS volume name Games, version 3.1. NTFS volume name Programas, version 3.1. NTFS volume name Works, version 3.1. NTFS volume name Dados, version 3.1. AppleRTL8169Ethernet: Ethernet address 90:2b:34:f3:18:98 Standby delay is not specified! Defaulting to 0x1068 ErP Timer is not specified! Defaulting to 0x3840 Standby delay is not specified! Defaulting to 0x1068 ErP Timer is not specified! Defaulting to 0x3840 macx_swapon SUCCESS Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -549064493056, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 CODE SIGNING: cs_invalid_page(0x1000): p=247[ksadmin] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=255[ksadmin] clearing CS_VALID CODE SIGNING: cs_invalid_page(0x1000): p=271[GoogleSoftwareUp] clearing CS_VALID Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: -549064493056, fCodecRequest->command->verb: 0xFFF, fPoweredDown: 0 Sound assertion in AppleHDAController at line 5097 Sound assertion in AppleHDAController at line 5098 Sound assertion in AppleHDAController at line 8276 localhost:~ Danilo$ # Name Processor Frequency Cores Platform Architecture Bits Score 2279100 iMac12,2 Intel Core i7-3770 3400 4 Mac OS X x86 64 14086 2279092 iMac12,2 Intel Core i7-3770 3400 4 Mac OS X x86 64 3228 o primeiro e com so os p e c states ligados e o segundo e com o ivy states legado Link to comment Share on other sites More sharing options...
artur_pt Posted September 1, 2013 Share Posted September 1, 2013 olá tá ai alguma coisa mal.. teu smbios n devia ser imac12,2 isso é 1 sandy bridge devia ser 13,1 ou 13,2 os ivy states devia funcionar tens de testar .. tás a usar ssdt ? tens de testar com e sem clover acho k não precisa ele vai buscar as tabelas de ssdt e faz o patch auto a elas devia ser qualquer coisa do genero ivystates=yes dropssdt=no mas isso so testando ai na máquina bom hack Link to comment Share on other sites More sharing options...
Recommended Posts