Jump to content

Choppy sound issues + clock remaining behind


42 posts in this topic

Recommended Posts

Unfortunately, the log you posted is not indicative of EFI/legacy boot. That is UEFI boot. 

For UEFI boot you'll see: Starting rEFIt rev 1928 on American Megatrends EFI

For EFI/Legacy boot you'll see: Starting rEFIt rev 1928 on CLOVER EFI

 

Edit: In my boot.log, I also have the correctedFSB:100. But, as I said before, the true value is a little less than that. 

Link to comment
Share on other sites

I'm not sure as I have no experience, but it should work that way unless Clover was installed a certain way. Example: install Clover for UEFI motherboards, meaning there wouldn't be the boot* files for EFI/legacy boot. And by looking at the drivers loaded, it is definitely UEFI boot. If possible, install Clover on a USB without selecting the UEFI option as it is easier than messing with the primary boot disk. 

Link to comment
Share on other sites

finally i managed to boot in EFI mode from a usb stick

0:100  0:100  MemLog inited, TSC freq: 2700071520
0:100  0:000  LegacyRegion2: Chipset/proc: 0x01008086
0:100  0:000   3rd Generation Core processors (PAM 0x80-0x86)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086
0:100  0:000  , Install = Success
0:114  0:014  BiosVideoDriverEntryPoint!
0:123  0:008  BiosVideoDriverBindingStart!
0:123  0:000  BiosVideoCheckForVbe
0:127  0:003   Edid1+
0:127  0:000   found Detail Timing 1440x900
0:130  0:003   Edid0+
0:130  0:000   found Detail Timing 1440x900
0:130  0:000  ... already present
0:143  0:013     0 1152x864 attr=BB - ok, edid+, working, highest, pref=0
0:144  0:000     1 1280x960 attr=BB - ok, edid+, working, highest, pref=1
0:145  0:000     2 640x480 attr=BB - ok, edid+, 640x480, working
0:145  0:000     3 800x600 attr=BB - ok, edid+, 800x600, working
0:145  0:000     4 1024x768 attr=BB - ok, edid+, 1024x768, working
0:146  0:000     5 1280x1024 attr=BB - ok, edid+, working, highest, pref=5
0:159  0:012     6 1440x900 attr=BB - ok, edid+, working
0:159  0:000  BV new mode: 5 1280x1024
0:216  0:056   SetMode pref 5 (5) = Success
2:110  1:894  
2:110  0:000  Starting rEFIt rev 1928 on CLOVER EFI
2:111  0:000  SelfDevicePath=PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x1DD17FE) @DD016818
2:111  0:000  SelfDirPath = \EFI\CLOVER
2:111  0:000  Total Memory Slots Count = 4
2:111  0:000  Type 17 Index = 0
2:111  0:000  SmbiosTable.Type17->Speed = 1067
2:111  0:000  SmbiosTable.Type17->Size = 4096
2:111  0:000  Type 17 Index = 1
2:111  0:000  Ignoring insane frequency value 0MHz
2:111  0:000  SmbiosTable.Type17->Speed = 0
2:111  0:000  SmbiosTable.Type17->Size = 0
2:111  0:000  Type 17 Index = 2
2:111  0:000  SmbiosTable.Type17->Speed = 1067
2:111  0:000  SmbiosTable.Type17->Size = 4096
2:111  0:000  Type 17 Index = 3
2:111  0:000  Ignoring insane frequency value 0MHz
2:111  0:000  SmbiosTable.Type17->Speed = 0
2:111  0:000  SmbiosTable.Type17->Size = 0
2:111  0:000  Boot status=0
2:111  0:000  Clover revision: 1928  running on MS-7758
2:111  0:000  ... with board ZH77A-G43 (MS-7758)
2:137  0:025  ConfigPlistPath: EFI\CLOVER\config.plist
2:150  0:013  Using OEM config.plist at path: EFI\CLOVER\config.plist
2:151  0:000  Loading early settings
2:151  0:000  timeout set to 5
2:151  0:000  Default theme: metal
2:151  0:000  configure Hide entries
2:151  0:000  hide InternalUEFI
2:151  0:000  ....true
2:151  0:000  Hiding volume with string VOLUME_NAME
2:151  0:000  Hiding volume with string VOLUME_UUID
2:151  0:000  Hiding volume with string TODO_HIDE_VOLUME_BY_TYPE/GROUP
2:151  0:000  LoadDrivers() start
2:165  0:013  Starting FSInject-64.efi
2:165  0:000  Using load options 'FSInject-64.efi  '
2:165  0:000  LoadDrivers() end
2:165  0:000  SetScreenResolution: 1280x1024 - already set
2:165  0:000  reinit: self device path=PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x1DD17FE)
2:165  0:000  new SelfHandle=DD016818
2:165  0:000  CPU Vendor = 756E6547 Model=206A7
2:165  0:000  The CPU not supported turbo
2:165  0:000  BrandString = Intel(R) Pentium(R) CPU G630 @ 2.70GHz
2:165  0:000  non-usable FLEX_RATIO = 10000
2:165  0:000  corrected FLEX_RATIO = 0
2:165  0:000  FSBFrequency=100MHz
2:165  0:000  Corrected FSBFrequency=100MHz
2:165  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
2:165  0:000  Family/ExtFamily: 0x6/0x0
2:165  0:000  MaxDiv/MinDiv: 27.0/16
2:165  0:000  Turbo: 27/27/27/27
2:165  0:000  Features: 0xBFEBFBFF
2:165  0:000  Threads: 2
2:165  0:000  Cores: 2
2:165  0:000  FSB: 100 MHz
2:165  0:000  CPU: 2700 MHz
2:165  0:000  TSC: 2700 MHz
2:165  0:000  PIS: 400 MHz
2:165  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
2:165  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
2:165  0:000  PCI (00|01:00.00) : 1002 683D class=030000
2:165  0:000  Found Radeon model=AMD Radeon HD 7770 Series
2:165  0:000  PCI (00|01:00.01) : 1002 AAB0 class=040300
2:165  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
2:165  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
2:165  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
2:165  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
2:165  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
2:165  0:000  PCI (00|00:1C.01) : 8086 1E12 class=060400
2:165  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
2:165  0:000  PCI (00|00:1C.03) : 8086 244E class=060401
2:165  0:000  PCI (00|04:00.00) : 1B21 1080 class=060400
2:165  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
2:165  0:000  PCI (00|00:1F.00) : 8086 1E4A class=060100
2:165  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
2:165  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
2:165  0:000  ScanSPD() start
2:166  0:000  SMBus CmdReg: 0x3
2:166  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7F14004, ioport: 0xF000, hostc: 0x1
2:180  0:014  SPD[0]: Type 11 @0x50 
2:189  0:008  Using XMP Profile1 instead of standard frequency 1333MHz
2:189  0:000  DDR speed 1600MHz 
2:189  0:000  Slot: 0 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
2:209  0:020  SPD[2]: Type 11 @0x52 
2:218  0:008  Using XMP Profile1 instead of standard frequency 1333MHz
2:218  0:000  DDR speed 1600MHz 
2:218  0:000  Slot: 2 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
2:344  0:126  ScanSPD() end
2:344  0:000  Calibrated TSC frequency =2700071520 =2700MHz
2:344  0:000  Loading main settings
2:344  0:000  USBFixOwnership: true
2:344  0:000  KextsToPatch: 2 requested
2:344  0:000  KextToPatch 0: VoodooHDA Kext bin patch, data len: 11
2:344  0:000  KextToPatch 1: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
2:344  0:000  found 7 volumes with blockIO
2:344  0:000   0. Volume:
2:344  0:000    PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)
2:356  0:011    Result of bootcode detection: bootable MacOSX (clover)
2:356  0:000    USB volume
2:356  0:000    USB volume
2:356  0:000    Volume 'Whole Disc Boot', OS 'MacOSX', Icon(s) 'clover', GUID = <null guid>
2:356  0:000   1. Volume:
2:356  0:000    PcieRoot(0x0)/Pci(0x1D,0x0)/USB(0x0,0x0)/USB(0x5,0x0)/HD(1,MBR,0x00000000,0x2,0x1DD17FE)
2:368  0:011    Result of bootcode detection: bootable MacOSX (clover)
2:368  0:000    USB volume
2:368  0:000    USB volume
2:382  0:013    Volume 'UNTITLED 1', OS 'MacOSX', Icon(s) 'clover', GUID = <null guid>
2:382  0:000    This is SelfVolume !!
2:382  0:000   2. Volume:
2:382  0:000    PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)
2:385  0:003    Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid>
2:385  0:000   3. Volume:
2:385  0:000    PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(1,GPT,69D7D053-8B98-4808-A75D-CD6009790FF0,0x28,0x64000)
2:388  0:003    Result of bootcode detection: bootable Legacy (legacy)
2:423  0:034    Volume 'EFI', OS 'Legacy', Icon(s) 'legacy', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0
2:423  0:000   4. Volume:
2:423  0:000    PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(2,GPT,80069576-3118-4373-88BC-50A16E671305,0x64028,0x11765930)
2:503  0:079    Booting OS 10.8.4
2:503  0:000    Volume 'Mountain Lion', OS 'ML', Icon(s) 'cougar,mac', GUID = 80069576-3118-4373-88BC-50A16E671305
2:503  0:000   5. Volume:
2:503  0:000    PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(3,GPT,8C9C38CE-9A30-48D4-8057-655D1FBBC9FF,0x11809958,0x61D00E90)
2:507  0:004    Volume 'stuff', OS '', Icon(s) '<null string>', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF
2:507  0:000   6. Volume:
2:508  0:000    PcieRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0x0,0x0)/HD(4,GPT,AF5AC1B4-4626-4B5A-824A-F80063A44B1C,0x7354A7E8,0x117C5A0)
2:560  0:052    Booting OS 10.8.3
2:560  0:000    Volume 'Install Mac OS X Mountain Lion', OS 'ML', Icon(s) 'cougar,mac', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C
2:583  0:022  Searching volumes for latest nvram.plist ...
2:583  0:000    1. Volume 'UNTITLED 1', GUID = <null guid> - not GPT - no nvram.plist - skipping!
2:583  0:000    3. Volume 'EFI', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0 - no nvram.plist - skipping!
2:583  0:000    4. Volume 'Mountain Lion', GUID = 80069576-3118-4373-88BC-50A16E671305 - no nvram.plist - skipping!
2:583  0:000    5. Volume 'stuff', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF - no nvram.plist - skipping!
2:583  0:000    6. Volume 'Install Mac OS X Mountain Lion', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C - no nvram.plist - skipping!
2:583  0:000   nvram.plist not found!
2:583  0:000  PutNvramPlistToRtVars: nvram.plist not found
2:583  0:000  Invalidating BuiltinIcons...
2:597  0:013  default theme metal is absent, using embedded
2:597  0:000  Font 0 prepared WxH=7x12 CharWidth=7
2:597  0:000  Scanning legacy ...
2:597  0:000   0: 'Whole Disc Boot' (clover) hidden
2:597  0:000   1: 'UNTITLED 1' (clover) add legacy
2:597  0:000   added 'Boot MacOSX from UNTITLED 1' OSType=3 Icon=clover
2:597  0:000   2: 'Whole Disc Boot' (legacy) hidden
2:597  0:000   3: 'EFI' (legacy) hidden
2:597  0:000   4: 'Mountain Lion' (cougar,mac) not legacy
2:597  0:000   5: 'stuff' (<null string>) hidden
2:597  0:000   6: 'Install Mac OS X Mountain Lion' (cougar,mac) not legacy
2:597  0:000  Scanning loaders... HideUEFI=Yes
2:597  0:000   0: 'Whole Disc Boot' no file system
2:597  0:000   1: 'UNTITLED 1'
2:611  0:013   2: 'Whole Disc Boot' no file system
2:611  0:000   3: 'EFI'
2:642  0:031   4: 'Mountain Lion'
2:693  0:050  HideBadges=0 Volume=Mountain Lion
2:694  0:001    added 'Boot Mac OS X from Mountain Lion'
2:698  0:004   5: 'stuff'
2:702  0:003   6: 'Install Mac OS X Mountain Lion'
2:751  0:048  HideBadges=0 Volume=Install Mac OS X Mountain Lion
2:752  0:000    added 'Boot Mac OS X from Install Mac OS X Mountain Lion'
2:769  0:016  found tools\Shell64.efi
2:769  0:000  FindDefaultEntry ...
2:769  0:000  FindStartupDiskVolume ...
2:769  0:000  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
2:769  0:000   not found
2:769  0:000  Searching config.plist DefaultBoot ...Default boot entry not found
2:769  0:000  DefaultIndex=-1 and MainMenu.EntryCount=8
2:769  0:000  RunMainMenu() start
2:857  0:088  GUI ready
Link to comment
Share on other sites

ok just installed it and rebooted the FSB is the same 100... ill test to see if the sound issue disappears

0:100  0:100  MemLog inited, TSC freq: 2700020560
0:100  0:000  
0:100  0:000  Starting rEFIt rev 1936 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000) @DB590618
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1067
0:100  0:000  SmbiosTable.Type17->Size = 4096
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0
0:100  0:000  SmbiosTable.Type17->Size = 0
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1067
0:100  0:000  SmbiosTable.Type17->Size = 4096
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0
0:100  0:000  SmbiosTable.Type17->Size = 0
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 1936  running on MS-7758
0:100  0:000  ... with board ZH77A-G43 (MS-7758)
0:121  0:020  ConfigPlistPath: EFI\CLOVER\config.plist
0:131  0:010  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:132  0:000  Loading early settings
0:132  0:000  timeout set to 1
0:132  0:000  Default theme: mlcamp
0:132  0:000  LoadDrivers() start
0:136  0:004  Starting CsmVideoDxe-64.efi
0:137  0:001  Using load options 'CsmVideoDxe-64.efi  '
0:138  0:000   - driver needs connecting
0:138  0:000  Starting DataHubDxe-64.efi
0:139  0:001  Using load options 'DataHubDxe-64.efi  '
0:164  0:025  Starting EmuVariableUefi-64.efi
0:165  0:001  Using load options 'EmuVariableUefi-64.efi  '
0:166  0:000  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:167  0:001  Starting FSInject-64.efi
0:168  0:001  Using load options 'FSInject-64.efi  '
0:168  0:000  Starting OsxAptioFixDrv-64.efi
0:170  0:001  Using load options 'OsxAptioFixDrv-64.efi  '
0:170  0:000  Starting OsxFatBinaryDrv-64.efi
0:171  0:001  Using load options 'OsxFatBinaryDrv-64.efi  '
0:172  0:000  Starting PartitionDxe-64.efi
0:173  0:001  Using load options 'PartitionDxe-64.efi  '
0:173  0:000   - driver needs connecting
0:173  0:000  Starting VboxHfs-64.efi
0:175  0:001  Using load options 'VboxHfs-64.efi  '
0:175  0:000   - driver needs connecting
0:175  0:000  3 drivers needs connecting ...
0:175  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:175  0:000  Partition driver loaded: 
0:175  0:000  Video driver loaded: disconnect Success
0:187  0:011  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
1:526  1:339  LoadDrivers() end
1:526  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent = Success, done
1:563  0:036  reinit: self device path=PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)
1:563  0:000  new SelfHandle=DB590618
1:563  0:000  CPU Vendor = 756E6547 Model=206A7
1:563  0:000  The CPU not supported turbo
1:563  0:000  BrandString = Intel(R) Pentium(R) CPU G630 @ 2.70GHz
1:563  0:000  non-usable FLEX_RATIO = 10000
1:563  0:000  corrected FLEX_RATIO = 0
1:563  0:000  FSBFrequency=100MHz
1:563  0:000  Corrected FSBFrequency=100MHz
1:563  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
1:563  0:000  Family/ExtFamily: 0x6/0x0
1:563  0:000  MaxDiv/MinDiv: 27.0/16
1:563  0:000  Turbo: 27/27/27/27
1:563  0:000  Features: 0xBFEBFBFF
1:563  0:000  Threads: 2
1:563  0:000  Cores: 2
1:563  0:000  FSB: 100 MHz
1:563  0:000  CPU: 2700 MHz
1:563  0:000  TSC: 2700 MHz
1:563  0:000  PIS: 400 MHz
1:563  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
1:563  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
1:563  0:000  PCI (00|01:00.00) : 1002 683D class=030000
1:563  0:000  Found Radeon model=AMD Radeon HD 7770 Series
1:563  0:000  PCI (00|01:00.01) : 1002 AAB0 class=040300
1:563  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
1:563  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
1:563  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
1:563  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
1:563  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
1:563  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
1:563  0:000  PCI (00|00:1C.01) : 8086 1E12 class=060400
1:563  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
1:563  0:000  PCI (00|00:1C.03) : 8086 244E class=060401
1:563  0:000  PCI (00|04:00.00) : 1B21 1080 class=060400
1:563  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
1:563  0:000  PCI (00|00:1F.00) : 8086 1E4A class=060100
1:563  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
1:564  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
1:564  0:000  ScanSPD() start
1:564  0:000  SMBus CmdReg: 0x3
1:564  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7F14004, ioport: 0xF000, hostc: 0x1
1:578  0:014  SPD[0]: Type 11 @0x50 
1:587  0:008  Using XMP Profile1 instead of standard frequency 1333MHz
1:587  0:000  DDR speed 1600MHz 
1:587  0:000  Slot: 0 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
1:608  0:020  SPD[2]: Type 11 @0x52 
1:617  0:008  Using XMP Profile1 instead of standard frequency 1333MHz
1:617  0:000  DDR speed 1600MHz 
1:617  0:000  Slot: 2 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
1:743  0:126  ScanSPD() end
1:743  0:000  Calibrated TSC frequency =2700020560 =2700MHz
1:743  0:000  Loading main settings
1:743  0:000  KextsToPatch: 1 requested
1:743  0:000  KextToPatch 0: AMD7000Controller (Custom Aji framebuffer for HD7770) Kext bin patch, data len: 64
1:743  0:000  found 5 volumes with blockIO
1:743  0:000   0. Volume:
1:743  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)
1:743  0:000    Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid>
1:743  0:000   1. Volume:
1:743  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)
1:744  0:000    Result of bootcode detection: bootable Legacy (legacy)
1:760  0:015    Volume 'EFI', OS 'Legacy', Icon(s) 'legacy', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0
1:760  0:000    This is SelfVolume !!
1:760  0:000   2. Volume:
1:760  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
1:814  0:054    Booting OS 10.8.4
1:814  0:000    Volume 'Mountain Lion', OS 'ML', Icon(s) 'cougar,mac', GUID = 80069576-3118-4373-88BC-50A16E671305
1:814  0:000   3. Volume:
1:814  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(3,GPT,8c9c38ce-9a30-48d4-8057-655d1fbbc9ff,0x11809958,0x61d00e90)
1:825  0:010    Volume 'stuff', OS '', Icon(s) '<null string>', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF
1:825  0:000   4. Volume:
1:825  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(4,GPT,af5ac1b4-4626-4b5a-824a-f80063a44b1c,0x7354a7e8,0x117c5a0)
1:872  0:046    Booting OS 10.8.3
1:872  0:000    Volume 'Install Mac OS X Mountain Lion', OS 'ML', Icon(s) 'cougar,mac', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C
1:872  0:000  Searching volumes for latest nvram.plist ...
1:872  0:000    1. Volume 'EFI', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0 - no nvram.plist - skipping!
1:872  0:000    2. Volume 'Mountain Lion', GUID = 80069576-3118-4373-88BC-50A16E671305 - no nvram.plist - skipping!
1:872  0:000    3. Volume 'stuff', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF - no nvram.plist - skipping!
1:872  0:000    4. Volume 'Install Mac OS X Mountain Lion', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C - no nvram.plist - skipping!
1:872  0:000   nvram.plist not found!
1:872  0:000  PutNvramPlistToRtVars: nvram.plist not found
1:872  0:000  Invalidating BuiltinIcons...
1:927  0:054  Using theme 'mlcamp' (EFI\CLOVER\themes\mlcamp)
1:940  0:013  font mpr.png loaded from themedir
1:940  0:000  Font loaded: ImageWidth=176 ImageHeight=288 Ptr=D938E018
1:940  0:000  Font 2 prepared WxH=11x18 CharWidth=10
1:940  0:000  Scanning loaders... HideUEFI=No
1:940  0:000   0: 'Whole Disc Boot' no file system
1:940  0:000   1: 'EFI'
1:964  0:023  HideBadges=0 Volume=EFI
1:964  0:000    added 'Boot UEFI internal from EFI'
1:964  0:000   2: 'Mountain Lion'
2:018  0:053  HideBadges=0 Volume=Mountain Lion
2:020  0:001    added 'Boot Mac OS X from Mountain Lion'
2:022  0:002   3: 'stuff'
2:024  0:001   4: 'Install Mac OS X Mountain Lion'
2:064  0:039  HideBadges=0 Volume=Install Mac OS X Mountain Lion
2:064  0:000    added 'Boot Mac OS X from Install Mac OS X Mountain Lion'
2:070  0:005  Checking EFI partition Volume 1 for Clover
2:071  0:001   Found Clover
2:073  0:001  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
2:073  0:000  FindBootOptionForFile: DB590618, \EFI\CLOVER\CLOVERX64.EFI
2:073  0:000  BootOrder: 2: Boot0008, Boot0003
2:073  0:000   Searching for: PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 130)
2:073  0:000   and for: HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 102)
2:074  0:000  FindBootOptionForFile: Not found.
2:074  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent = Success, done
2:113  0:038  found tools\Shell64U.efi
2:116  0:003  FindDefaultEntry ...
2:116  0:000  FindStartupDiskVolume ...
2:116  0:000  GetEfiBootDeviceFromNvram:
2:116  0:000   efi-boot-device-data: PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
2:116  0:000   Volume: 'PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)'
2:116  0:000   LoaderPath: '<null string>'
2:116  0:000   Guid = 80069576-3118-4373-88BC-50A16E671305
2:116  0:000  FindStartupDiskVolume searching ...
2:116  0:000   volume: partition = PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
2:116  0:000   searching for that partition
2:116  0:000    found entry 1. 'Boot Mac OS X from Mountain Lion', Volume 'Mountain Lion'
2:116  0:000  Boot redirected to Entry 1. 'Boot Mac OS X from Mountain Lion'
2:116  0:000  DefaultIndex=1 and MainMenu.EntryCount=9
7:106  4:990  GUI ready 
Link to comment
Share on other sites

Don't pay attention to that FSB value. That is the stock value. What's more important is the true bus speed set in the config.plist. 

See:

2:852  0:006  CPU Vendor = 756E6547 Model=206A72:852  0:000  The CPU supported turbo
2:852  0:000  BrandString = Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz
2:852  0:000  non-usable FLEX_RATIO = 10000
2:852  0:000  corrected FLEX_RATIO = 0
2:852  0:000  FSBFrequency=100MHz
2:852  0:000  Corrected FSBFrequency=100MHz
2:852  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
2:852  0:000  Family/ExtFamily: 0x6/0x0
2:852  0:000  MaxDiv/MinDiv: 25.0/8
2:852  0:000  Turbo: 29/29/29/31
2:852  0:000  Features: 0xBFEBFBFF
2:852  0:000  Threads: 4
2:852  0:000  Cores: 2
2:852  0:000  FSB: 100 MHz
2:852  0:000  CPU: 2500 MHz
2:852  0:000  TSC: 2500 MHz
2:852  0:000  PIS: 400 MHz

And further down, my correct values:

3:278  0:000  StartLoader() start
3:341  0:063  Finally: Bus=99776kHz CPU=2494MHz
Link to comment
Share on other sites

Now run: 

/usr/local/bin/clover-genconfig >config.plist

 in Terminal. Then, navigate to /user/local/bin and open the config.plist file. You should see a bus value under CPU. Just add it to your UEFI config.plist. 

just tried it but...

 

 

localhost:bin iondarie$ sudo /usr/local/bin/clover-genconfig >config.plist
-bash: config.plist: Permission denied
Link to comment
Share on other sites

You can calculate the FSB from the TSC frequency (found in the very beginning of the log) like Clover does it:

 

2700071520 / 27 = 100,002,648
 
2700020560 / 27 = 100,000,761
 
I would be surprised if you still get the issues with r1936.
  • Like 1
Link to comment
Share on other sites

No more clock & sound issues.

 

But today i managed to mess my system after i realised i have no QE/CI...  So i went and extracted a fresh dsdt from linux and im gonna start from scratch...

 

Maybe try mavericks who knows

Link to comment
Share on other sites

 Share

×
×
  • Create New...