Jump to content

Success - Gigabyte Z87X-UD3H Mavericks DP2 Haswell Hackintosh


  • Please log in to reply
247 replies to this topic

#61
naiclub

naiclub

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 236 posts
  • Gender:Male
  • Location:ThaiLand
  • Interests:Nuclear Fission+Galaxy
    http://www.youtube.com/watch?v=JVMlc4SgE5g

hey guys, I managed to make it work almost perfectly with Naidb's image (via PM).

The only problem that I'm having now is that

 

 

2. No sleep mode -  whenever it goes into sleep mode it doesn't wake up  :( only way i can get it out is to reset the CMOS (power off/reset still keeps it in standby mode). That sometimes messes my BIOS so when i try to boot into the installation after that i get the screen being all messed up so I need to reinstall again. 

 

1. imessage doesn't work (i tried the ethernet order thing - and app store, icloud works fine

Fixed with chameleon wizard (fileNVRAM.dylib in modules).

 

Any ideas!? To get it to work to this stage I basically used Naidb's files from the second page and his install.

You need the DSDT.aml file on my card because my video card is HD5770.
Is a GTX 460, but it's your right to do with it.
Good luck
 
Edited DSDT.aml from this position.
 
Device (P0P2)
            {
                Name (_ADR, 0x00010000)
                Method (_PRT, 0, NotSerialized)
                {
                    If (PICM)
                    {
                        Return (AR02 ())
                    }
                    Return (PR02 ())
                }
                Device (GFX0)
                {
                    Name (_ADR, Zero)
                    Method (_DSM, 4, NotSerialized)
                    {
                        Store (Package (0x10)
                            {
                                "AAPL,slot-name", 
                                Buffer (0x08)
                                {
                                    "PCIex16"
                                }, 
                                "device-id", 
                                Buffer (0x04)
                                {
                                     0xB8, 0x68, 0x00, 0x00
                                }, 
                                "@0,name", 
                                Buffer (0x0D)
                                {
                                    "ATY,Vervet"
                                }, 
                                "@1,name", 
                                Buffer (0x0D)
                                {
                                    "ATY,Vervet"
                                }, 
                                "@2,name", 
                                Buffer (0x0D)
                                {
                                    "ATY,Vervet"
                                }, 
                                "@3,name", 
                                Buffer (0x0D)
                                {
                                    "ATY,Vervet"
                                }, 
                                "model", 
                                Buffer (0x13)
                                {
                                    "ATI Radeon HD 5770"
                                }, 
                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                }
                Device (HDAU)
                {
                    Name (_ADR, One)
                    Method (_DSM, 4, NotSerialized)
                    {
                        Store (Package (0x02)
                            {
                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                }
            }

Replace

Device (GFX0)
                {
                    Name (_ADR, Zero)
                    Name (_SUN, One)
                    Method (_DSM, 4, NotSerialized)
                    {
                        Store (Package (0x0E)
                            {
                                "AAPL,slot-name", 
                                "Slot-1", 
                                "name", 
                                "Display Controller", 
                                "@0,connector-type", 
                                Buffer (0x04)
                                {
                                     0x00, 0x08, 0x00, 0x00
                                }, 
                                "@1,connector-type", 
                                Buffer (0x04)
                                {
                                     0x00, 0x08, 0x00, 0x00
                                }, 
                                "@2,connector-type", 
                                Buffer (0x04)
                                {
                                     0x00, 0x08, 0x00, 0x00
                                }, 
                                "@3,connector-type", 
                                Buffer (0x04)
                                {
                                     0x00, 0x08, 0x00, 0x00
                                }, 
                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                }
                Device (HDAU)
                {
                    Name (_ADR, One)
                    Method (_DSM, 4, NotSerialized)
                    {
                        Store (Package (0x02)
                            {
                                "hda-gfx", 
                                Buffer (0x0A)
                                {
                                    "onboard-1"
                                }
                            }, Local0)
                        DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                        Return (Local0)
                    }
                }
            }

 



#62
Hal012

Hal012

    InsanelyMac Protégé

  • Members
  • Pip
  • 2 posts
  • Gender:Male

Thanks Cobra. I managed to install DP1 but I was still having trouble booting in anything but -x.

So I updated to DP2 then installed Chameleon with only the kexts that gaspimp provided. 

I tried all possible boot flags and i even went as far as removing the graphics card. Yet I cannot make it book in anything but safe mode. 

Strangely enough, it seems to hang at different points, regardless of the flags I try (I've tried all combinations, but only -x gets me in). 

 

Any clues as to what I can try? I even left it with no kexts in extra - same thing. 

I'm pretty much running the same thing as you guys, do not understand what I'm missing. 

sorry for my english, I have the same problem, I can only ent in safe boot, and i want to know how you solved it?



#63
phantom8

phantom8

    InsanelyMac Protégé

  • Members
  • Pip
  • 24 posts

I'm also having the same problem.  That is, I can only boot with safe mode "-x".  If I boots up normally, the system will hang at somewhere around the Bluetooth message.  Can anyone please help?



#64
TimeWalker75a

TimeWalker75a

    InsanelyMac Legend

  • Gurus
  • 1,249 posts
  • Gender:Male

I'm also having the same problem.  That is, I can only boot with safe mode "-x".  If I boots up normally, the system will hang at somewhere around the Bluetooth message.  Can anyone please help?

Is your monitor connected via VGA? In case it its, there's your answer.



#65
phantom8

phantom8

    InsanelyMac Protégé

  • Members
  • Pip
  • 24 posts

Is your monitor connected via VGA? In case it its, there's your answer.

Thanks for the reply.  I only have a DVI connection to the motherboard.  There is no VGA monitor connected.  I still can't figure what the conflict is.  Also, there is no discrete graphics card in the system.  Any other ideas?



#66
Hal012

Hal012

    InsanelyMac Protégé

  • Members
  • Pip
  • 2 posts
  • Gender:Male

Thanks for the reply.  I only have a DVI connection to the motherboard.  There is no VGA monitor connected.  I still can't figure what the conflict is.  Also, there is no discrete graphics card in the system.  Any other ideas?

 

I had that problem, and what happened was that I forgot to disable VT-d, now I can start normal, but I could not get detected Iris Pro



#67
Picasso

Picasso

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 390 posts
  • Gender:Male

Can you boot in the first start with the HD4600? Thanks!



#68
Cobra03

Cobra03

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 105 posts
  • Gender:Male
  • Location:US

Can you boot in the first start with the HD4600? Thanks!

Yes you can. Do you have DSDT injection for HD4600?



#69
phantom8

phantom8

    InsanelyMac Protégé

  • Members
  • Pip
  • 24 posts

I had that problem, and what happened was that I forgot to disable VT-d, now I can start normal, but I could not get detected Iris Pro


My VT-d is already disabled. I haven't done any dsdt/ssdt injection to get the Hd4600 fully working. Will that result in the inability to boot without "-x"? Thanks!

 

[EDIT] Problem resolved.  It turns out the AppleIntelHD5000Graphics.kext was causing the problem.  Removing this kext allows me to boot into system without "-x".  Now, I need to add dsdt injection and put back the kext to get my HD4600 working.



#70
Picasso

Picasso

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 390 posts
  • Gender:Male

Cobra, 

 

I don't have de injection. I'm downloading DP4 Full Instalation and all the Essencial like Chamaleon.

I have the same Motherboard as the beguinning of the forum. Maybe It's better start with a graphic card.

If you know something, great!


My VT-d is already disabled. I haven't done any dsdt/ssdt injection to get the Hd4600 fully working. Will that result in the inability to boot without "-x"? Thanks!

 

[EDIT] Problem resolved.  It turns out the AppleIntelHD5000Graphics.kext was causing the problem.  Removing this kext allows me to boot into system without "-x".  Now, I need to add dsdt injection and put back the kext to get my HD4600 working.

Phantom, wich software do you use for apply the injection to the graphic card? and which commands have you use when you boot? thanks!



#71
phantom8

phantom8

    InsanelyMac Protégé

  • Members
  • Pip
  • 24 posts

Cobra,

I don't have de injection. I'm downloading DP4 Full Instalation and all the Essencial like Chamaleon.
I have the same Motherboard as the beguinning of the forum. Maybe It's better start with a graphic card.
If you know something, great!

Phantom, wich software do you use for apply the injection to the graphic card? and which commands have you use when you boot? thanks!


I haven't done the HD4600 injection yet. This is what I'm gonna do next. From my initial reading, it looks like I need to use Aida64 in Windows to generate the ssdt first.

#72
Picasso

Picasso

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 390 posts
  • Gender:Male

This is the instruction Thank fo you

 

 

This is the instruction Thank fo you

Hi Naibd, you described a post about ML works in your Mobo. Can you take a walk in the ML forum and describe or check your method to work. We are a lot with the same Mobo without exit. Maybe you can do a good Guide for us. Share your result please! Thank you for your cooperation ;)



#73
naiclub

naiclub

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 236 posts
  • Gender:Male
  • Location:ThaiLand
  • Interests:Nuclear Fission+Galaxy
    http://www.youtube.com/watch?v=JVMlc4SgE5g

Hi Naibd, you described a post about ML works in your Mobo. Can you take a walk in the ML forum and describe or check your method to work. We are a lot with the same Mobo without exit. Maybe you can do a good Guide for us. Share your result please! Thank you for your cooperation ;)

Apologize
I do not know English. It is difficult to communicate with you.
I used Google Translate to help. I get to harass you.
Thank you. :blush:  :blush:


#74
TimeWalker75a

TimeWalker75a

    InsanelyMac Legend

  • Gurus
  • 1,249 posts
  • Gender:Male

I get to harass you.

Oh boy :D

 

 

The installation on Z87/H87 boards is the same as on previous versions of chipsets/sockets. The only thing different is the post install process.



#75
Picasso

Picasso

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 390 posts
  • Gender:Male

 

Apologize
I do not know English. It is difficult to communicate with you.
I used Google Translate to help. I get to harass you.
Thank you. :blush:  :blush:

 

Ok. What do you speak? Parla Italaino? hablas español, Voce fala portuges? Parle vou Francais?



#76
naiclub

naiclub

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 236 posts
  • Gender:Male
  • Location:ThaiLand
  • Interests:Nuclear Fission+Galaxy
    http://www.youtube.com/watch?v=JVMlc4SgE5g

Ok. What do you speak? Parla Italaino? hablas español, Voce fala portuges? Parle vou Francais?

I prefer speaking in Thailand. Because I was Thailand.
Now, I gather, then, will guide for you.


#77
Picasso

Picasso

    InsanelyMac Sage

  • Members
  • PipPipPipPipPipPip
  • 390 posts
  • Gender:Male

I've tried install kext in different ways.

 

Can someone explain hoy to install a kext step by step without any application? (And delete one please).

 

Appears to be a lot of people don't understand the precious files atached in this forum.

 

Thanks a lot!



#78
naiclub

naiclub

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 236 posts
  • Gender:Male
  • Location:ThaiLand
  • Interests:Nuclear Fission+Galaxy
    http://www.youtube.com/watch?v=JVMlc4SgE5g
10.8.5 waiting for the full release before it.
Then it's time to do it now, do not select that 10.8.5 will be released this September.
Please be patient is better.


#79
veddernick

veddernick

    InsanelyMac Protégé

  • Members
  • Pip
  • 27 posts
  • Gender:Male

i have icloud  log in error can somebody help me?



#80
ham4ever

ham4ever

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 345 posts
  • Gender:Male

how to make intel HD4600 works with SSDT ? or how to inject Device (IGPU) in SSDT ?







0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2017 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy