Jump to content

Success - Gigabyte Z87X-UD3H Mavericks DP2 Haswell Hackintosh


  • Please log in to reply
247 replies to this topic

#41
sq10

sq10

    InsanelyMac Protégé

  • Members
  • Pip
  • 3 posts
Thank you for your reply :D

I will look into using VoodooHDA but is there a difference in sound quality between AppleHDA and VoodooHDA?
I have also used chmod -R 755 and chown root:wheel, not sure why LAN is still not working. Is it supposed to work after install, cache clear and reboot or is there something I missed? Sorry for sounding ignorant but this is my first hackintosh.

Thank you :)

#42
necrophagous

necrophagous

    InsanelyMac Protégé

  • Members
  • PipPip
  • 66 posts
  • Gender:Male
  • Location:3rd World Country

you got the correct appleHDA right under your nose , why pick voodooHDA? hehe 



#43
naiclub

naiclub

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 191 posts
  • Gender:Male
  • Location:ThaiLand
  • Interests:Nuclear Fission+Galaxy
    http://www.youtube.com/watch?v=JVMlc4SgE5g

OpenGL: 26.74 fps

 

An opportunity, your OpenGL performance is only only 1 point higher than my HD4000; should be 10 points higher.  Likely, no AGPM.  HD5000 PM is working in the Beta releases.  Two choices, enable Haswell PM with macbookair6,1 and a PikeRAlpha ssdt or edit AGPM with the IGPU plist from macbookair6,1 board-id to the sysdef/board-id you are using.  

I then disconnect the video card HD5770 single card HD4600.
Results have increased my score card. Not change SMBOS.plist.
Using 13.2 score 37.99 fps.
Thank you  by toleda 

Screen+Shot+2556-07-22+at+6.35.46+AM.png



#44
devdev001

devdev001

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts

you got the correct appleHDA right under your nose , why pick voodooHDA? hehe 

Good point, will try that again :)   When I first tried it it didn't work, maybe I installed wrong or something.

 

devdev001



#45
naiclub

naiclub

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 191 posts
  • Gender:Male
  • Location:ThaiLand
  • Interests:Nuclear Fission+Galaxy
    http://www.youtube.com/watch?v=JVMlc4SgE5g

Good point, will try that again :)   When I first tried it it didn't work, maybe I installed wrong or something.
 
devdev001


Just wanted to say that I installed to remove FakeSMC.kext Story by removing the S / L / E.
  Extra then I go to the post instead.
From the trial version FakeSMC.kext 5.2.xxx not it boot into the machine.
I used to FakeSMC.kext version 8.1.865 to boot the machine.
I try and help me as well.
Thank c0ercion kozlek who helped develop the board Z87-x.  :D  :D



#46
sq10

sq10

    InsanelyMac Protégé

  • Members
  • Pip
  • 3 posts
Hello everyone

I got ethernet and audio to work, but I am unable to file graphical stutter and glitches. On top of that, I have audio stutter too, in which the audio starts and stops. I'm thinking that installing the DSDT may fix the graphical glitches, but what about the audio stutter?

Also like devdev001, I am not too sure on how to install the DSDT, could someone help me with that please?

Thank you very much :)

#47
gimpbully

gimpbully

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts
I'm so close I can taste it but network is eluding me. I've dropped the E1000 kext in /Extra/Extentions, rebuild the cache and... nothing. Any troubleshooting steps someone can think of that I'm missing?

#48
kryten

kryten

    InsanelyMac Protégé

  • Members
  • PipPip
  • 51 posts
  • Gender:Male

Hello everyone

I got ethernet and audio to work, but I am unable to file graphical stutter and glitches. On top of that, I have audio stutter too, in which the audio starts and stops. I'm thinking that installing the DSDT may fix the graphical glitches, but what about the audio stutter?

Also like devdev001, I am not too sure on how to install the DSDT, could someone help me with that please?

Thank you very much :)

 

What boot flags are you using? I saw you have a GTX 680 Kepler based card. Try booting with GraphicsEnabler=No. 

I'm so close I can taste it but network is eluding me. I've dropped the E1000 kext in /Extra/Extentions, rebuild the cache and... nothing. Any troubleshooting steps someone can think of that I'm missing?

Have you checked permissions and ownership of the E1000 kext ? Use myHack to fix permissions and ownership or in Terminal :

sudo chown -R 0:0 /path/to/your/whatever.kext
sudo chmod -R 755 /path/to/your/whatever.kext

Try to load kext manually with :

sudo kextload /path/to/your/whatever.kext


#49
devdev001

devdev001

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts

I'm so close I can taste it but network is eluding me. I've dropped the E1000 kext in /Extra/Extentions, rebuild the cache and... nothing. Any troubleshooting steps someone can think of that I'm missing?

 

I was having problems as well, as the kext would not load.  Moving it into System/Library/Extensions and rebuilding the kernelcache worked for me.

 

devdev001



#50
gimpbully

gimpbully

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts

I was having problems as well, as the kext would not load.  Moving it into System/Library/Extensions and rebuilding the kernelcache worked for me.

 

devdev001

Gah, that worked and I had to go and update.  The AppleHDA included in the pack on this thread doesn't see to work under DP4.  Can anyone confirm?



#51
kryten

kryten

    InsanelyMac Protégé

  • Members
  • PipPip
  • 51 posts
  • Gender:Male

@ gaspimp

The AppleHDA included still works for me under DP4. I'm only using the green output, haven't tested anything else.

Had to install it again though as it gets replaced by the update. Any chance on updating your first post with the final F6 BIOS?

Is this the F6 version with release date of 15-07-2013 on Gigabytes's site?



#52
gimpbully

gimpbully

    InsanelyMac Protégé

  • Members
  • Pip
  • 6 posts

Gah, that worked and I had to go and update. The AppleHDA included in the pack on this thread doesn't see to work under DP4. Can anyone confirm?


edit: Got it, used the HDA+Enabler from this post:

http://www.insanelym...-5#entry1930410

ugh, or not. I was doing the work via remote desktop and didn't realize the sound device was actually an airplay device, not may sound chip. Back to the drawing board...

edit2: alright, back on-location.  I ended up doing the following and confirmed sound coming out my speakers on 10.9 DP4: installed the 10.8.4 version of AppleHDA & HDAEnabler via [that tonymac product that installs drivers] *Then* I took the AppleHDA from this post and dropped it in. I think that means the HDAEnabler was the wrong layout or something?

Regardless, I have a fully working system now. You guys rule. (really, the tonymac editing is really annoying and inhibits discussion)

#53
elsewiht

elsewiht

    InsanelyMac Protégé

  • Members
  • Pip
  • 14 posts

Hello everyone. I am currently building my first hackintosh and would love to get some feedback since you have very similar specs to what i have in mind.

1. Intel Core i7-4770/4770K
2. Gigabyte Z87X-UD3H Motherboard
3. EVGA Nvidia GeForce GTX 770 w/ ACX Cooler (2G, 1111MHz)
4. Intel 520 240GB SSD or Samsung 840 Pro 256GB?
5. Noctua NH-D14
6. Corsair Graphite 600T

 

Should i also install ML 10.8.4 or Mavericks DP? I want to use it as a daily driver until full native support is available.

Thanks in advance!



#54
iAstroboyid

iAstroboyid

    InsanelyMac Protégé

  • Members
  • Pip
  • 33 posts

Thank You gaspimp. I had bios F4 fail load Update new Official Bios F6  , notice now they have F7a  may fix stepping ? lower less power CPU uses?    

 

I'm 10.9 DP4 sound works ,i message works , i was able to log in iCloud =)   about this mac , Mac Pro early 2008 

 

1. Intel Core i7-4770/4770K
2. Gigabyte Z87X-UD3H Motherboard
3. Gigabyte Nvidia GeForce GTX 6xxx 
4. Intel  120GB SSD
5. Mac Pro case
6. Corsair Graphite 500

 

Time to sell my old system still work 10.8.4 =) 



#55
elessar072

elessar072

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

Hi guys, 

 

Sorry to bulge in here, especially since I'm so new, but I've been mainly been in read-only mode for quite a few days. 

I've tried myhack and the installer by chris111, but in the end I only managed to get the furthest with the gaspimp's guide (doing everything cleanly). I couldn't get past PCI Configuration begin for the life of me with my videocard, so I set my bios to use my integrate chipset instead.

After that I was getting stuck at "NVDAStartup: Official" so I removed all the nvda ktexts and now the NVDAStartup thing doesn't appear and instead I get stuck at:

 

"

Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 (/don't think this is related"

init

probe

start"

 

Really grateful for any help you can provide guys! I can't find much help on the forum or on google about this.

 
 

My rig is:

 

Z87X-UD3H

i5 4670

Gigabyte 460GTX

16gb GskillRam

 

 

Cheers,

Dan. 



#56
Cobra03

Cobra03

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 104 posts
  • Gender:Male
  • Location:US

Hi guys, 

 

Sorry to bulge in here, especially since I'm so new, but I've been mainly been in read-only mode for quite a few days. 

I've tried myhack and the installer by chris111, but in the end I only managed to get the furthest with the gaspimp's guide (doing everything cleanly). I couldn't get past PCI Configuration begin for the life of me with my videocard, so I set my bios to use my integrate chipset instead.

After that I was getting stuck at "NVDAStartup: Official" so I removed all the nvda ktexts and now the NVDAStartup thing doesn't appear and instead I get stuck at:

 

"

Apple16X50UARTSync1: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200 (/don't think this is related"

init

probe

start"

 

Really grateful for any help you can provide guys! I can't find much help on the forum or on google about this.

 
 

My rig is:

 

Z87X-UD3H

i5 4670

Gigabyte 460GTX

16gb GskillRam

 

 

Cheers,

Dan. 

 

 

Try "-f npci0x2000 GraphicsEnabler=Yes"



#57
elessar072

elessar072

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

Thanks Cobra. I managed to install DP1 but I was still having trouble booting in anything but -x.

So I updated to DP2 then installed Chameleon with only the kexts that gaspimp provided. 

I tried all possible boot flags and i even went as far as removing the graphics card. Yet I cannot make it book in anything but safe mode. 

Strangely enough, it seems to hang at different points, regardless of the flags I try (I've tried all combinations, but only -x gets me in). 

 

Any clues as to what I can try? I even left it with no kexts in extra - same thing. 

I'm pretty much running the same thing as you guys, do not understand what I'm missing. 

 

Attached Files



#58
elessar072

elessar072

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

hey guys, I managed to make it work almost perfectly with Naidb's image (via PM).

The only problem that I'm having now is that

 

 

2. No sleep mode -  whenever it goes into sleep mode it doesn't wake up  :( only way i can get it out is to reset the CMOS (power off/reset still keeps it in standby mode). That sometimes messes my BIOS so when i try to boot into the installation after that i get the screen being all messed up so I need to reinstall again. 

 

1. imessage doesn't work (i tried the ethernet order thing - and app store, icloud works fine

Fixed with chameleon wizard (fileNVRAM.dylib in modules).

 

Any ideas!? To get it to work to this stage I basically used Naidb's files from the second page and his install.



#59
legends74

legends74

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts

iMessage is a known issue since 10.8.  I haven't tried this in 10.9 but it worked fine for me in 10.8:

 

 

IMESSAGES / MESSAGES FIX

Use the guide from this website to fix imessages problem.
- Use Chameleon Wizard to update /boot (does not affect our hackinstaller kexts or settings)
- Copy modules folder to /Extra
- Reboot and enjoy imessages

Credits: This Guide

 

 



#60
elessar072

elessar072

    InsanelyMac Protégé

  • Members
  • Pip
  • 8 posts

hi legends, thanks - it worked with latest chameleon wizard - the fileNVRAM in the options







1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy