Jump to content

[Success - Updated] HP dv6t-2300 CTO | Mavericks 10.9.2


Egyptiano
 Share

10 posts in this topic

Recommended Posts

Hello everyone and peace for all

 

spec

Machine : HP dv6t-2300 cto

Processor : Intel® Core™ i7-720QM Processor (6M Cache, 1.60 GHz)

Memory  : 4 GB 1333 MHz DDR3

Hard Disk : Seagate 1TB SSHD (Internal) + Hitachi 320 GB (External)

Graphic Adapter : GeForce GT 320M 1024 MB  ( WORKING )

WI-FIAtheros AR9285 WiFi ( WORKING ) + Bluetooth ar3011 Combo ( WORKING ) replaced with : Intel Advanced-n 6200 ( NOT WORKING )

LAN : Realtek ( WORKING )

Sound : IDT 92HD75B3X5 ( WORKING )

HP Camera : ( WORKING )

Bootloader : both Chameleon and Clover bootloaders working fine.

                                                                  ---------------------------------------------------------------------

 

---Steps---

 

- restore Mavericks 10.9.2 via myhack to usb or partition on external hard disk

- replace OSInstall(MBR) + OSInstall.mpkg

- start installing with ( cpus=1 -v ) boot flags

- after finishing install start Mavericks 10.9.2 with ( cpus=1 -v ) boot flags

- use Lapic Kernel Patcher V0.7 1.0 to boot without cpus=1

- download DSDT.aml

- download AppleHDA.kext

- download VoodooBattery.kext

- download RealtekRTL8111.kext

- install all kexts via kext utility

 

---Optional---

 

- download org.chameleon.Boot.plist Chameleon Bootloader configuration file

- download config.plist Clover Bootloader configuration file

- download IO80211Family.kext for Atheros AR9285 WiFi

- download BTFirmwareUploader.kext for Bluetooth ar3011

post-1022606-0-32041300-1398998366_thumb.jpg

post-1022606-0-23674000-1399000457_thumb.jpg

Edited by Egyptiano
Link to comment
Share on other sites

Ok. Envy. 

 

Now...How?  A general procedure would be very cool.  I've got 10.6.3 on my dv8t using the Mammouth guide but I'm pretty much not successful going further.

hello

all i did

restore 10.9 Mavericks DP1 .dmg to 8gb USB stick and use those files ( you will find many threads in forum talking about how to restore mac os to usb )

MBR Patch thanks to oldnapalm

Chameleon bootloader or Clover Bootloader  both working fine

 

in fact i'm just a beginner

I hope this help you a little

Link to comment
Share on other sites

  • 8 months later...
  • 1 month later...

Thanks Egyptiano, but I have small question about your clover config. Did your turbo boost work? i7 720qm max multiplier is 21 (2.8Ghz), but you only set max to 15, also how about temperature of cpu? 

I have same cpu with you, mine set max multiplier is 21. And I have trouble with turbo, since multiplier get above x18, the temperature high as hell (80*+) and the multiplier never goes down anymore, It will keep at x18 until I sleep or shutdown.

Link to comment
Share on other sites

Thanks Egyptiano, but I have small question about your clover config. Did your turbo boost work? i7 720qm max multiplier is 21 (2.8Ghz), but you only set max to 15, also how about temperature of cpu? 

I have same cpu with you, mine set max multiplier is 21. And I have trouble with turbo, since multiplier get above x18, the temperature high as hell (80*+) and the multiplier never goes down anymore, It will keep at x18 until I sleep or shutdown.

you are welcome bro, in fact i get CPU configuration from post goes to yehia Amer , although I put the multiplier limit to 21 earlier only 13 worked in all cases i don't know why , temperature ranging between 65 to 75.

I am satisfied with this at the moment but I'll try to change it.

regards

Link to comment
Share on other sites

  • 9 months later...
 Share

×
×
  • Create New...