Vahids Posted June 20, 2013 Share Posted June 20, 2013 I hace Acer-E1-571G Core i3-3120M ivy bridge 4G RAM NVDIA 710m with 1 GB Dedicated VRAM Intel 4000 HD 500 GB HDD I susccesfully Installed by USB made by own but after restart I put NullCp... and FaceSMC to /Volume/Mac/System/Lib... / Extention/ and reboot again, system won't boot to complete registration and finish installation. I have 2 NTFS Partition and 1 EXT4 and 1 Linux-Swap I attached picture of stuck ! Link to comment Share on other sites More sharing options...
WaldMeister Posted June 20, 2013 Share Posted June 20, 2013 Hi, Boot with -s. After loading, type the following: mount -uw / rm -rf /System/Library/Extensions/Geforce.kext rm -rf /System/Library/Extensions/NVDAGK100Hal.kext rm -rf /System/Library/Extensions/NVDAStartup.kext shutdown -r now You should be able to get to the desktop now. The problem is the Nvidia card, it will not work, so after the system is setup, i recommend editing the DSDT, if any, to disable the card. 1 Link to comment Share on other sites More sharing options...
Vahids Posted June 21, 2013 Author Share Posted June 21, 2013 Works but after update to 10.8.3 combo, again same problem. I removed kext again, but not helped. Link to comment Share on other sites More sharing options...
WaldMeister Posted June 21, 2013 Share Posted June 21, 2013 Hi, Did you remove all of the kexts again after the update? If so, please boot with -v, and upload a photo of the output. Thanks. Link to comment Share on other sites More sharing options...
Aju Deeju Posted June 21, 2013 Share Posted June 21, 2013 Try booting with GraphicsEnabler=No Link to comment Share on other sites More sharing options...
Vahids Posted June 21, 2013 Author Share Posted June 21, 2013 Try booting with GraphicsEnabler=NoI always use this switch. Without GraphicsEnabler=No, never start booting. Link to comment Share on other sites More sharing options...
Aju Deeju Posted June 21, 2013 Share Posted June 21, 2013 Remove the AppleIntelHD* and AppleIntelSNB* kexts and boot . It will take a long time to boot then install the kexts from here 1 Link to comment Share on other sites More sharing options...
Vahids Posted June 25, 2013 Author Share Posted June 25, 2013 Remove the AppleIntelHD* and AppleIntelSNB* kexts and boot .It will take a long time to boot then install the kexts from here Boots good, Now I want to fix resolution. It's locked on : 1024x 768 Hi,Did you remove all of the kexts again after the update? If so, please boot with -v, and upload a photo of the output.Thanks.Sure. It's boot well but resolution locked on 1024*768 Link to comment Share on other sites More sharing options...
Aju Deeju Posted June 25, 2013 Share Posted June 25, 2013 Try the kexts from the link I posted before Link to comment Share on other sites More sharing options...
Vahids Posted June 26, 2013 Author Share Posted June 26, 2013 Try the kexts from the link I posted beforeI just used AppleIntelS... But won't boot. Link to comment Share on other sites More sharing options...
Recommended Posts