Posted 22 June 2013 - 02:09 PM
It also seems that I'm still stuck booting from my flashdrive which is fairly frustrating. Any ideas why that might be or how to fix it? When I try booting without the flashdrive it gives me a black window for a little bit before booting into windows
Posted 22 June 2013 - 03:22 PM
Sure, give me two minutes here. I am not sure how to upload a file?
Edit: I have the zip file made, but I'm unsure of how to share that with you? Also, I am using a patched BIOS, how do I tell exactly what version?
I ended up just putting it in my google drive, here's a link: https://docs.google....dit?usp=sharing
Posted 22 June 2013 - 04:05 PM
Install this in your extra folder and then restart. Post a new IOreg after restart. Thanks.
Also what BIOS version is this?
Posted 22 June 2013 - 08:46 PM
So here's an update:
1. I still can't boot into OSX from anything but this flashdrive. If I try to boot my computer any other way it just stalls briefly before booting into my Windows HDD.
2. The clock speed is working properly, however, when I restart it resets the time the clock thinks that it is.
3. I don't have functional networking (bluetooth/wifi/ethernet)
Posted 22 June 2013 - 08:52 PM
and post a good picture of the screen
Posted 22 June 2013 - 09:53 PM
if you have possibility to return on desktop, go to extra and change the theme by the one on the usb flash drive; after that try to boot
in your hdd and type this flag
GraphicsEnabler=No PCIRootUID=0 -v -x
Posted 22 June 2013 - 09:59 PM
I will try that, although at this point I believe that my extra folder is the one from the flashdrive entirely.
I also can't figurew out how to run those boot flags when I am booting directly from my hdd
Edit: I tried all of that with no results
Posted 22 June 2013 - 10:06 PM
replace the extra original and just change the theme because I think its the themes that is unableling you to typing flag
Posted 22 June 2013 - 10:25 PM
Ok, here's what I did. I replaced all of that stuff. But I don't think we are talking about the same place to type flags. I can only get to a real boot loader when I choose the flashdrive as a boot device from the motherboard. If I choose the hdd that I have 10.9 on I get a black screen with a flashing cursor briefly before it says, "boot0: Done" which is referring to the drive that I have windows on, because it immediately boots into windows after that. Does that make sense?
Posted 22 June 2013 - 10:39 PM
I just email you
Posted 22 June 2013 - 10:40 PM
You need a more up to date boot loader then the one you are installing post install.
Posted 22 June 2013 - 10:43 PM
I'm pretty sure I'm using an up to date boot loader?... If not, where would I find that?
Posted 22 June 2013 - 11:01 PM
you have used chameleon r 2248 for the flash drive and the postinstalation !!
Posted 22 June 2013 - 11:21 PM
I am going to try using the manual guide now, thanks!
realized that I can't follow the manual guide, because the internet is not working on my PC
Posted 23 June 2013 - 07:20 AM
Everything currently boots off of my actual HDD now!
I had to unmount my drive with osx on it and follow this:
4. Reboot system back into Maverikcs installer.
5. Run Disk Utility and unmount the drive you installed OS Lion on.
6. Launch Terminal and execute the following command:
7. Exit Terminal
8. Reboot Normally
Tomorrow, I will spend some more time checking what is and isn't working. I've read something about a graphics thing where you test by seeing if there's a ripple somewhere? But, I can't remember what it was?... Does anyone know a test I can run to test if everything is running properly?
I see in system profile that it thinks that my RAM is 1333, but I know that it's 1600, does this matter?
At also thinks that I am using a Xeon processor, does that matter?
Final note, it seems that the clock just doesn't run when the system is off. So when I boot back the clock is wherever it left off.
Posted 23 June 2013 - 06:21 PM
all the stuf and word on about this mac its possible to change LOL see my laptop HP ProBook
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users