Jump to content

Kernel panic ACPI ?


3 posts in this topic

Recommended Posts

Hi folks...

 

this is my first time building a hackintosh. I am getting the following error :

 

kernel panic - unable to find drivers for this platform - ACPI ( attached pic and the link ( http://imgur.com/LFQgFwk) .. whichever is easier for you) 56527d1368851801t-kernel-panic-acpi-eb4hpfiq3hyc-n-w-c1sw7hqd2_a5rpk2svige1280c.jpg

 

 

Here is what I have done so far :

 

1.) download osx mountain lion

2.) make a bootable usb drive with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]

3.) change the bios to AHCI

4.) installed mountain lion on my pc ( by following the guide mentioned here :http://www.lifehacke....-7-3-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]/)

5.) used xxxxxxxxx with this dsdt file :dsdt.aml ( please check if this dsdt is valid or not ? )

here is the xxxxxxxx setup i used :

 

 

 

Please tell me what do i need to change or do to fix that kernel panic ( oh and it only boots from usb not from harddrive )

 

my pc details are below:

 

INTEL BX80570E8400 CORE 2 DUO E8400/3.00GHz/6MB/1333FSB/LGA775 CPU

WESTERN DIGITAL WD6400AACS GREEN POWER CAVIAR 640GB/7200RPM/SATAII/3.5"/16MB CACHE HARD DISK DRIVE

GIGABYTE GA-EP45-UD3R S775, P45, FSB1600, 4DDR2, PCIE2.0, 3x1394a, GbLAN, RAID, UD3, ATX MOTHERBOARD

LG GH22NS30 22xDVD+-R, 12xDVD-RAM, DL, BLK, SATA DVD BURNER

KINGSTON KHX8500D2K2/4G HYPERX 1066MHz(PC2-8500) DDR2 4GB KIT (2x2GB) CL5 (5-5-5-15) RAM ( only using 2 gb )

ASUS VW198T 19" LCD MONITOR BLACK 1680x1050, 5ms, 3000:1, 300cd/m2, DVI/SPK/VESA/BLACK/3YR

NVIDIA GTX 465 1gb

Edited by iFIRE
Multishit Photo from TobyCrap
Link to comment
Share on other sites

 Share

×
×
  • Create New...