iFIRE Posted April 5, 2013 Share Posted April 5, 2013 but this is not a full report send me full report with all folders Link to comment Share on other sites More sharing options...
JahStories Posted April 5, 2013 Author Share Posted April 5, 2013 Ops sorry i tought you needed just the acpi tables :/ this should be good... DarwinDumper_2.4.9_Chameleon_2.2_ML_Asus 2.zip Link to comment Share on other sites More sharing options...
iFIRE Posted April 5, 2013 Share Posted April 5, 2013 can start with this, patch your AppleIntelCPUPowerManegemente.kext and delete NULLCPUP and delete natit kext and all NVDA kexts NVDA::rmStart failed NVDA,Display-B: Not usable NVDAStartup: Official Natit: Starting. Natit: Found device with ID=0x0DF0 Natit: Starting. Natit: Found device with ID=0x0046 fNumVRAMBlocks is 4 NVDAGF100HAL loaded and registered GeForceSensors (0): [Error] unable to shadow VBIOS Natit: Starting. Natit: Found device with ID=0x0DF0 OSMetaClass: Kext com.Apple.driver.PS2Keyboard class ApplePS2Keyboard is a duplicate;kext org.voodoo.driver.PS2Keyboard already has a class by that name. Kext com.Apple.driver.PS2Keyboard start failed (result 0xdc00400a). Kext com.Apple.driver.PS2Keyboard failed to load (0xdc008017). Failed to load kext com.Apple.driver.PS2Keyboard (error 0xdc008017). [sleepEnabler] Registering PowerManagement dispatch table with PM_DISPATCH_VERSION 102... [sleepEnabler] To disable (if the kernel panics), please specify the boot argument pmVersion=0 [sleepEnabler] Calling pmInitComplete()... NullCPUPowerManagement::init: properties=0xffffff800a2fe880 NullCPUPowerManagement::start OSMetaClass: Kext org.netkas.FakeSMC class FakeSMC is a duplicate;kext org.netkas.driver.FakeSMC already has a class by that name. Kext org.netkas.FakeSMC start failed (result 0xdc00400a). Kext org.netkas.FakeSMC failed to load (0xdc008017). Failed to load kext org.netkas.FakeSMC (error 0xdc008017). Link to comment Share on other sites More sharing options...
JahStories Posted April 5, 2013 Author Share Posted April 5, 2013 Sadly Natit is needed to get quartz extreme, i double checked there isn't any NULLCPU only a patched appleintelcpu* in S/L/E or in EXTRA i've fakesmc only in extra, and its working since i'm getting sensors data (that with the first one i've tried didn't work'd) no duplication for any kext i don't even have kext labelled ps2 on my s/l/e only voodoops2 in extra.... dunno where those errors come from !??! Link to comment Share on other sites More sharing options...
iFIRE Posted April 5, 2013 Share Posted April 5, 2013 41 2 0xffffff7f80a05000 0xf000 0xf000 org.voodoo.driver.PS2Controller (1.1.0) <9 7 5 4 3 1>52 0 0xffffff7f80aac000 0x3000 0x3000 org.voodoo.driver.PS2Keyboard (1.1.0) <41 33 7 6 5 4 3 1>53 0 0xffffff7f80aaf000 0x3000 0x3000 org.voodoo.driver.PS2Mouse (1.2.0) <41 33 7 6 5 4 3 1>com.yourcompany.driver.AppleACPIPS2Nub (1111) <9 7 5 4 3 1>post your Extra folderyour boot log PMAP: PCID enabled Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64 vm_page_bootstrap: 956154 free pages and 51462 wired pages kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000] zone leak detection enabled standard timeslicing quantum is 10000 us standard background quantum is 2500 us mig_table_max_displ = 74 corecrypto kext started! Running kernel space in FIPS MODE Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d corecrypto.kext FIPS integrity POST test passed! corecrypto.kext FIPS AES CBC POST test passed! corecrypto.kext FIPS TDES CBC POST test passed! corecrypto.kext FIPS SHA POST test passed! corecrypto.kext FIPS HMAC POST test passed! corecrypto.kext FIPS ECDSA POST test passed! corecrypto.kext FIPS DRBG POST test passed! corecrypto.kext FIPS POST passed! [SleepEnabler] Registering PowerManagement dispatch table with PM_DISPATCH_VERSION 102... [SleepEnabler] To disable (if the kernel panics), please specify the boot argument pmVersion=0 [SleepEnabler] Calling pmInitComplete()... NullCPUPowerManagement::init: properties=0xffffff800a2fe880 NullCPUPowerManagement::start AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled AppleACPICPU: ProcessorId=2 LocalApicId=4 Enabled AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled AppleACPICPU: ProcessorId=4 LocalApicId=5 Enabled AppleACPICPU: ProcessorId=5 LocalApicId=4 Disabled AppleACPICPU: ProcessorId=6 LocalApicId=5 Disabled AppleACPICPU: ProcessorId=7 LocalApicId=6 Disabled AppleACPICPU: ProcessorId=8 LocalApicId=7 Disabled calling mpo_policy_init for Sandbox Security policy loaded: Seatbelt sandbox policy (Sandbox) calling mpo_policy_init for Quarantine Security policy loaded: Quarantine policy (Quarantine) calling mpo_policy_init for TMSafetyNet Security policy loaded: Safety net for Time Machine (TMSafetyNet) Copyright © 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [S0 S3 S4 S5] (S3) PFM64 (36 cpu) 0xf80000000, 0x80000000 [ PCI configuration begin ] PCI configuration changed (bridge=7 device=2 cardbus=0) [ PCI configuration end, bridges 7 devices 13 ] RTC: Only single RAM bank (128 bytes) [ PCI configuration begin ] PCI configuration changed (bridge=7 device=2 cardbus=0) [ PCI configuration end, bridges 8 devices 19 ] OSMetaClass: Kext org.netkas.FakeSMC class FakeSMC is a duplicate;kext org.netkas.driver.FakeSMC already has a class by that name. Kext org.netkas.FakeSMC start failed (result 0xdc00400a). Kext org.netkas.FakeSMC failed to load (0xdc008017). Failed to load kext org.netkas.FakeSMC (error 0xdc008017). HWSensors Project Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. HWSensors Project Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved. FakeSMCDevice: 15 preconfigured key(s) added SMC: successfully initialized CPUSensors: CPU family 0x6, model 0x25, stepping 0x5, cores 2, threads 4, TJmax 105, Platform string k74 OSMetaClass: Kext com.apple.driver.ApplePS2Controller class ApplePS2Controller is a duplicate;kext org.voodoo.driver.PS2Controller already has a class by that name. Kext com.apple.driver.ApplePS2Controller start failed (result 0xdc00400a). Kext com.apple.driver.ApplePS2Controller failed to load (0xdc008017). Failed to load kext com.apple.driver.ApplePS2Controller (error 0xdc008017). GeForceSensors (0): [Error] unable to shadow VBIOS mbinit: done [64 MB total pool size, (42/21) split] Pthread support ABORTS when sync kernel primitives misused rooting via boot-uuid from /chosen: 1FB775E5-F11F-34DA-B1D1-7844B171CF91 Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict> com.apple.AppleFSCompressionTypeDataless kmod start com.apple.AppleFSCompressionTypeZlib kmod start OSMetaClass: Kext com.Apple.driver.PS2Keyboard class ApplePS2Keyboard is a duplicate;kext org.voodoo.driver.PS2Keyboard already has a class by that name. Kext com.Apple.driver.PS2Keyboard start failed (result 0xdc00400a). Kext com.Apple.driver.PS2Keyboard failed to load (0xdc008017). Failed to load kext com.Apple.driver.PS2Keyboard (error 0xdc008017). com.apple.AppleFSCompressionTypeDataless load succeeded com.apple.AppleFSCompressionTypeZlib load succeeded No interval found for . Using 8000000 Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleIntelPchSeriesAHCI/CHN0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST9640320AS Media/IOGUIDPartitionScheme/Apple_HFSX_Untitled_2@3 BSD root: disk0s3, major 1, minor 3 jnl: unknown-dev: journal start/end pointers reset! (jnl 0xffffff800b19ee58; s 0x95dc00 e 0x95dc00) Kernel is LP64 Waiting for DSMOS... macx_swapon SUCCESS Controller: Intel PCH (vendor ID: 8086, device ID: 3b56) IOWMIController: Found WMI Device: WMI1 Previous Shutdown Cause: 5 ath_get_caps[4037] rx chainmask mismatch actual 1 sc_chainmak 0 22.076996: ath_get_caps[4012] tx chainmask mismatch actual 1 sc_chainmak 0 22.081588: Atheros: mac 192.2 phy 14.0 radio 12.0 22.081602: Use hw queue 0 for WME_AC_BE traffic 22.081609: Use hw queue 1 for WME_AC_BK traffic 22.081615: Use hw queue 2 for WME_AC_VI traffic 22.081622: Use hw queue 3 for WME_AC_VO traffic 22.081628: Use hw queue 8 for CAB traffic 22.081633: Use hw queue 9 for beacons 22.081781: wlan_vap_create : enter. devhandle=0x670ab610, opmode=IEEE80211_M_STA, flags=0x1 22.081832: wlan_vap_create : exit. devhandle=0x670ab610, opmode=IEEE80211_M_STA, flags=0x1. 22.081982: start[1012] sc->sc_inuse_cnt is at offset: 203c, sizeof(_sc->sc_ic) is 25e8 ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out NVDAStartup: Official Natit: Starting. Natit: Found device with ID=0x0DF0 Natit: Starting. Natit: Found device with ID=0x0046 fNumVRAMBlocks is 4 NVDAGF100HAL loaded and registered GeForceSensors (0): [Error] unable to shadow VBIOS Natit: Starting. Natit: Found device with ID=0x0DF0 GeForceSensors (0): [Error] unable to shadow VBIOS DSMOS has arrived VoodooBattery 1.3 © 2008-10 Superhai, All Rights Reserved. May 5 2010 09:52:50 64 bit NTFS driver 3.10 [Flags: R/W]. NTFS volume name .Windows, version 3.1. NTFS-fs warning (device /dev/disk0s2, pid 72): ntfs_system_inodes_get(): Windows is hibernated. Will not be able to remount read-write. Run chkdsk. AirPort_AtherosNewma40: Ethernet address 48:5d:60:5b:b2:5e IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification 38.427297: ATHR: unknown locale: 60 NVDA::rmStart failed NVDA,Display-B: Not usable AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving). 39.125496: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap 39.125509: switchVap from 1 to 1 39.126912: ATHR: unknown locale: 60 39.148148: performCountryCodeOperation: Disconnecting from AP 39.148155: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap 39.155450: ATHR: unknown locale: 60 39.170851: ATHR: unknown locale: 60 en0: 802.11d country code set to 'IT '. 39.208093: ATHR: unknown locale: 60 en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 39.282353: setWOW_PARAMETERS:wowevents = 2(1) en0: BSSID changed to 00:23:df:f7:d4:a9 AirPort: Link Up on en0 en0: BSSID changed to 00:23:df:f7:d4:a9 39.785740: apple80211Request[9816] Unsupported ioctl 111 AirPort: RSN handshake complete on en0 Sandbox: sandboxd(113) deny mach-lookup com.apple.coresymbolicationd 43.827502: ATHR: unknown locale: 60 44.313858: ATHR: unknown locale: 60 48.075779: ATHR: unknown locale: 60 CODE SIGNING: cs_invalid_page(0x1000): p=187[GoogleSoftwareUp] clearing CS_VALID 413.706776: ath_sysctl_athpaprdsend[2183] paprd_send 0 413.706781: ath_sysctl_athpaprdsend[2183] paprd_send 0 413.706788: ath_sysctl_athpaprdenable[2213] paprd_enable 0 413.706791: ath_sysctl_athpaprdenable[2213] paprd_enable 0 413.706797: ath_sysctl_athpaprdrate[2241] paprd_rate 0 413.706800: ath_sysctl_athpaprdrate[2241] paprd_rate 0 413.716658: ath_sysctl_athpaprdsend[2183] paprd_send 0 413.716664: ath_sysctl_athpaprdsend[2183] paprd_send 0 413.716670: ath_sysctl_athpaprdenable[2213] paprd_enable 0 413.716673: ath_sysctl_athpaprdenable[2213] paprd_enable 0 413.716679: ath_sysctl_athpaprdrate[2241] paprd_rate 0 413.716682: ath_sysctl_athpaprdrate[2241] paprd_rate 0 Sandbox: sandboxd(801) deny mach-lookup com.apple.coresymbolicationd Sandbox: sandboxd(837) deny mach-lookup com.apple.coresymbolicationd IOHIDSystem cursor update overdue. Resending. Link to comment Share on other sites More sharing options...
JahStories Posted April 5, 2013 Author Share Posted April 5, 2013 i didn't catch your first lines of that post (those about the ps2) Btw this is my extra folder sorry the dsdt in the extra folder is not the one i'm using now... its the one attached Extra.zip DSDT.aml.zip Link to comment Share on other sites More sharing options...
iFIRE Posted April 5, 2013 Share Posted April 5, 2013 you used myHack for install right ? myhac install a kext called myhack.kext and this kext have a folderContents/ pluguins with all kexts duplicates, delete all kexts from your Extra/Extensions, because all need kexts are in this folder pluguins of the myhack.kext, take a look in this Link to comment Share on other sites More sharing options...
JahStories Posted April 5, 2013 Author Share Posted April 5, 2013 isn't better to delete myhack kext and keep the Extra folder? btw i'm trying Link to comment Share on other sites More sharing options...
iFIRE Posted April 5, 2013 Share Posted April 5, 2013 delete myhack.kext, delete folder Extensiosn in Extra, delete forder removed extensions in Extra, install these kexts for S/L/E with all what you need. kexts..zip Link to comment Share on other sites More sharing options...
JahStories Posted April 5, 2013 Author Share Posted April 5, 2013 tried... instant kernel panic of the appleintelcpu kext should i try any specific patched kext? Link to comment Share on other sites More sharing options...
iFIRE Posted April 5, 2013 Share Posted April 5, 2013 you need a AppleIntellCPUP patched download Pandora app here in the Forum and patch your AICPUPM kext Link to comment Share on other sites More sharing options...
JahStories Posted April 5, 2013 Author Share Posted April 5, 2013 damn it, same kernel panic may i try to do something else? Link to comment Share on other sites More sharing options...
3.14r2 Posted April 5, 2013 Share Posted April 5, 2013 Try this one... jahstories_DSDT.aml.zip And set mac model ID to MacBookPro6,2 Link to comment Share on other sites More sharing options...
iFIRE Posted April 5, 2013 Share Posted April 5, 2013 post a photo of kernel Panic, you have repaired permissions an rebuild caches with kext wizard? Link to comment Share on other sites More sharing options...
JahStories Posted April 5, 2013 Author Share Posted April 5, 2013 here it is sorry for the low quality picture XD Link to comment Share on other sites More sharing options...
iFIRE Posted April 6, 2013 Share Posted April 6, 2013 OK, if you have problem for boot use your USBInstaller for boot, it have the NULLCPUP and can help you arrive in the desktop, then open Pandora app and Patch your AppleICPUP kext, or boot in single user mode : -s mount / mkdir kext_backup cd /System/Library/Extensions mv AppleIntelCPUPowerManagement.kext/kext_backup reboot lnk Link to comment Share on other sites More sharing options...
JahStories Posted April 6, 2013 Author Share Posted April 6, 2013 i've patched it with pandora (great app! thx)... its the modded kext that give me this KP, right now i'm with nullcpu but cpu temperatures keep stayin' high and now, dunno why... stop is completely greyed in the apple menu... and in the shutdown splash screen if i click stop nothing happen... Link to comment Share on other sites More sharing options...
iFIRE Posted April 6, 2013 Share Posted April 6, 2013 THE kext AppleIntelCPUPM is responsable for Temperature and sleep functions, if this kext not work native you have problem with this, I suggest for you if your Laptop is UEFI Bios, take a look in section Downloads and get the app AICPUPMPatch for UEFI boards, "delete first your AICPUPM" install this AppleAICPUPM Vanilla from 10.8.0 and patch with this app, then repair permissions with Kext Wizad and reboot, now look if the system load this two kexts, then delete NULLCPU repair permissions and reboot, looK if this work now. Vanilla AICPUPM 10.8.0.zip Link to comment Share on other sites More sharing options...
meknb Posted April 6, 2013 Share Posted April 6, 2013 Have you tried <key>DropSSDT</key> <string>Yes</string> I get a kernel panic if i don't use it when enable cstate ect i think my dsdt has some of my ssdt info in it. Link to comment Share on other sites More sharing options...
JahStories Posted April 6, 2013 Author Share Posted April 6, 2013 thx meknb that flag made me boot without nullcpupm, but by the way speedstep seems not to work correctly, hight temperatures and still grayed stop on the apple menu... Link to comment Share on other sites More sharing options...
JahStories Posted April 6, 2013 Author Share Posted April 6, 2013 i'm not using uefi right now, i've a legacy bios with an option for uefi boot, never used it btw, just to understand is it normal that right now i have a greyed sleep button? and is there a way to check if the speedstep is working? i am getting just 2 speeds: 1.19ghz and 9x multiplier and when heavy app 20x multiplier and 2.64ghz, shouldn't it change all times? Link to comment Share on other sites More sharing options...
iFIRE Posted April 6, 2013 Share Posted April 6, 2013 take a screnshot of sleep button, for speed steep you need a SSDT for ivy bridge processor. About power management (SpeedStep, sleep) SSSDT.zip Link to comment Share on other sites More sharing options...
JahStories Posted April 6, 2013 Author Share Posted April 6, 2013 Thanks for the link, i'm checking it now, here is the screenshot I've noticed that my processor is not ivy bridge, it an arrandale... should i use that patcher anyway? may it be the dsdt? i'm not so good in editing it, i've been helped to patch it, its this one. this is the patcher result... DSDT.aml.zip Link to comment Share on other sites More sharing options...
iFIRE Posted April 6, 2013 Share Posted April 6, 2013 i no have idea why this button is greyed, is the first time what I see this, if your processor is a sandy bridge the link is ok for you too Link to comment Share on other sites More sharing options...
JahStories Posted April 6, 2013 Author Share Posted April 6, 2013 double checked is not sandy or ivy bridge its an arrandale proc. Link to comment Share on other sites More sharing options...
Recommended Posts