planetearth90 Posted April 3, 2013 Share Posted April 3, 2013 I have a Gigabyte GA-Z77-DS3H rev 1.1 motherboard and an MSI 6570 1GB video card. I want to enable the HDMI audio on the graphics card only in the first slot. I have the HDA enabler kext that activates audio Layout 2 which is I believe 5 outputs on the 3 rear plugs and or front audio. I want to enable only HDMI audio layout 3 for HDMI on the video card only could anybody guide me or help either alter this kext to leave the onboard video audio which is the Intel HD4000 audio and video at ID layout 1 and change on the first graphics card which I think is PCIe0 or 1 to audio ID layout 3 for HDMI output on that cable so I can feed it to my TV with 1080P and HDMI audio on the graphics card only. Any help greatly appreciated. I am new to Hackintosh. I saw how to get teh DSDT and was extracting incorrectly after boot which I just found out was incorrect it has to be done before boot, but it seems that just altering the ID layout without getting into DSDT would be easier. If I need to do DSDT how do I alter it? I see in the I/OExplorer it is very easy to see where the change needs to be made but when you look at it in DSDT and AML it looks completely different and I have no idea on how to change it. Need guidance please. Link to comment Share on other sites More sharing options...
ameris_cyning Posted April 3, 2013 Share Posted April 3, 2013 This is my DSDT. See if it works with you dsdt.aml.zip 1 Link to comment Share on other sites More sharing options...
Recommended Posts