3 replies to this topic

[grug]

I'm running Lion 10.7.5 now on my machine.  most of the stuff works except the Vanctec 4+1 pci-e sata internal and external ports.

I've read most of the threads yet i'm still unsure if it's just i have the wrong kexts installed...

I already have 3 hard drives and my dvd burner on the sata ports of the board.  But I would love to solve this issue because I want to add anothe 1tb drive to do another raid 0 set and a SSD later on, and also use the external drives that use e-sata.  I dont plan tu use the raid card functions so far...

I currently have HDD1 and HDD 2 320  G Raid set HDD3 a 1.5 T.

The PCI-E is model is a UGT1s100R I've put screen shots here that may help you help me
Mobo is a Asuz p5kpl-cm

https://Screen Shot 2013-02-15 at 4.21.14 PM.png

Attached Files

•  Screen Shot 2013-02-15 at 4.22.10 PM.png   487.66K   13 downloads
•  Screen Shot 2013-02-15 at 4.21.14 PM.png   533.66K   21 downloads
•  Screen Shot 2013-02-15 at 4.16.00 PM.png   87.87K   17 downloads
•  Screen Shot 2013-02-15 at 4.20.46 PM.png   635.41K   9 downloads
•  HackPro.txt   20.5K   0 downloads

[eep357]

make sure all controllers are set to AHCI mode in bios (right now looks like in IDE mode) then use this.

Attached Files

•  AHCI_Extended_Injector.kext 4.zip   3.57K   3 downloads

[grug]

Thanks man,
I've flashed the bios to the latest version for the mobo, hoping I would have ahci commands in there before I upgraded from 10.5.8 to Lion, but as far as I know there are none in it...but I see JMicron jmb 363 AHCI in Sys Report pane . No pci card recognized...well you saw the screen shot.  Somwhere on the Asus site I read you can add AHci drivers can under windows...but I have no windows partition installed anywhere?  There must be a work around? In the bios the IDE configuration is set to enhanced with enhanced mode support on s-ata....

Anf for this next do i install it in extra or s/l/e.  I'm on software raid...in case this means I can't add kext from the Raid OSX Lion bootable Array or I have to insatll it on the separate raid partitions....

[grug]

Tried your kext from the bootable unified Raid array, no luck...does not seem like it changed anything...do i have to intall this new next by booting from a usb drive, going into raid 1 partition from there, install with next wizard, repair permissions reboot and do that again on the raid 2 partition for this to work...