Jump to content

Asus G75VX - Mountain Lion

ASUS G75VX MOUNTAIN LION

  • Please log in to reply
134 replies to this topic

#101
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain
There are a lot of versions to save the ACPI table in AIDA64 con windows. DSDT, SSDT. A lot.. Wich should I choose?

#102
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain

Hey I think you need to inject the correct connector-type, display-cfg, connector-flags. My theory is that kepler desktop cards and some mobile are working because the type of the conector they use Display port, DVI are working with the detection the driver itself is doing, but if your first display is LVDS like in your case the driver detection is not working. So try to inject with an EFI string.

If you like to try it out let me know and I can generate for you some EFI strings

Good luck


How can I tell the Hackintosh that the graphics is connected to the display trough the displayport instead of hdmi?
Something lime this but applied to nvidia:

http://forum.osxlati...tel-hd4000-gpu/

#103
styrian

styrian

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPip
  • 822 posts
  • Gender:Male

@NiPeGun

 

Hello!

 

DSDT and SSDT tables, booth in bin format, would be nice.

 

Have fun.



#104
Zackptg5

Zackptg5

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

I'd just plug a monitor into the hdmi and see what happens.



#105
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain
No, I meant, how do I configure chameleon, the dsdt or whatever, to indicate the system to forget about hdmi and to focus ONLY in display port as the primary connection between the graphics card and the display?

#106
Zackptg5

Zackptg5

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

I'm not entirely sure but here's all of the chameleon boot options:

 

http://www.insanelym...-for-chameleon/

 

This part interested me though:

 

display_0=<value> Inject alternate value of display-cfg into NVDA,Display-A@0 (HEX).
display_1=<value> Inject alternate value of display-cfg into NVDA,Display-B@1 (HEX).



#107
Zackptg5

Zackptg5

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

As for the hex values needed, maybe could get those through EFI Studio. Areos would probably know



#108
Zackptg5

Zackptg5

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

Since mountain lion clearly isn't going to change at all, I'm going to give mavericks a shot in the coming weeks. I'll post how it goes.



#109
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain
Kexts in Mavericks must be signed. according to what I've been reading this week.. We better keep doing ML too. Just in case. When we fix this stuff in ML we can keep growing the thread about Mavericks that I already started.

I already extracted the vbios from the bios and told chameleon to use it with "use nvidia rom". Same results. Meaning that chameleon already see the vbios in normal conditions. So, I think we better focus in tell the system to forget about hdmi. We need to know what files to modify.

After that we modify all the nvidia kexts with our GA info and lets see.



#110
Zackptg5

Zackptg5

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

Well my laptop just crapped the bed exactly like yours did. There must be one kind of a glitch in the bios. So it's not in RMA. In the mean time, I installed mavericks on my big rig and it seems to be much easier to set up with more kexts for more hardware. It may be even easier to try mavericks. Can you post the link for the mavericks thread you started?



#111
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain

Well my laptop just crapped the bed exactly like yours did. There must be one kind of a glitch in the bios. So it's not in RMA. In the mean time, I installed mavericks on my big rig and it seems to be much easier to set up with more kexts for more hardware. It may be even easier to try mavericks. Can you post the link for the mavericks thread you started?


Sorry to hear that. Think might be constant forced power offs etc. BIOS gets corrupted. I'm not making modifications to the BIOS anymore since I use the 1.2.7 usb 3.0 kext.

The thread of mavericks it's located here:

http://www.insanelym...75vx-mavericks/

Whe need to make some multiconference on skype to work faster. Writing we are getting old...



#112
Zackptg5

Zackptg5

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

Ok, well I'm moving operations to the mavericks thread because I like it a lot more than mountain lion.



#113
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain

@NiPeGun

 

Hello!

 

DSDT and SSDT tables, booth in bin format, would be nice.

 

Have fun.

AIDA 64 gives me 4 different SSDTs! I rared all of them plus the dsdt.

Extracted from .206 BIOS version.

Attached Files



#114
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain

Strange info on notebookcheck about the GTX 670MX:

 

"However, as most laptops with this graphics card will feature Optimus, the integrated GPU will likely have direct control over the display ports and may limit the feature set available by the Nvidia Kepler cards"

 

http://www.notebookc...MX.82603.0.html



#115
Zackptg5

Zackptg5

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 100 posts

AIDA 64 gives me 4 different SSDTs! I rared all of them plus the dsdt.
Extracted from .206 BIOS version.


The easy way to generate an dsdt is through this script in your mavericks install:
http://www.tonymacx8...ybridge-pm.html

#116
styrian

styrian

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPip
  • 822 posts
  • Gender:Male

@NiPeGun

 

I had a look at your uploaded ACPI tables. They are looking so far fine, because there is nothing about IGPU. You could try to insert in your PEG0/GFX0 a DSM method following this guide: http://rampagedev.wo...rd-into-a-dsdt/ In any case you have also to add the DTGP method patch from DSDT Editor or MacIasl. If you are booting with the edited DSDT.aml GraphicsEnabler has to be deactivated.

 

Can you please upload an Ioreg gethered by IORegestryExplorer app vers 2,1 without the patched DSDT, and if the DSDT is partial working one after booting with the edited DSDT?

 

Do you get an external display working?

 

Have fun.



#117
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain

@NiPeGun

 

I had a look at your uploaded ACPI tables. They are looking so far fine, because there is nothing about IGPU. You could try to insert in your PEG0/GFX0 a DSM method following this guide: http://rampagedev.wo...rd-into-a-dsdt/ In any case you have also to add the DTGP method patch from DSDT Editor or MacIasl. If you are booting with the edited DSDT.aml GraphicsEnabler has to be deactivated.

 

Can you please upload an Ioreg gethered by IORegestryExplorer app vers 2,1 without the patched DSDT, and if the DSDT is partial working one after booting with the edited DSDT?

 

Do you get an external display working?

 

Have fun.

 

The link on RampageDev you provided says that nvidia GTX 6xx will no longer need that DSDT edits. Plus, point 6 of part 2 says that is only to Fermi cards. This is a Kepler one. Should I do it anyway ??



#118
styrian

styrian

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPip
  • 822 posts
  • Gender:Male

You should try it indeed. The gtx 670m needs to be recognized at early bootup. For desktop cards the opinion of rampagedev is correct. An other thing are laptops, as you know by yourself.

 

Have fun.



#119
NiPeGun

NiPeGun

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 125 posts
  • Gender:Male
  • Location:Spain

You should try it indeed. The gtx 670m needs to be recognized at early bootup. For desktop cards the opinion of rampagedev is correct. An other thing are laptops, as you know by yourself.

Have fun.


Yes. Well, I think 670m is a Fermi card. This 670mx is a kepler one. I'll try it anyway.

#120
styrian

styrian

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPip
  • 822 posts
  • Gender:Male

Yes. Well, I think 670m is a Fermi card. This 670mx is a kepler one. I'll try it anyway.

Sorry was a typing mistake. I have meant the GTX 670mx.

 

Have fun.







0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy