kuruu Posted January 22, 2013 Share Posted January 22, 2013 Hi, I have been running a p5w off of a 2tb seagate for a while and have just needed to upgrade to a 3tb, a seagate as well. i was using chameleon to boot. i cannot get any bootloader to boot off the 3tb disk. i have tried all the installers and installing manually with the same result. boot0 error. The workaround is to install chameleon on a usb stick. Any got any ideas of things to try to get this working again? Thanks! Link to comment Share on other sites More sharing options...
kuruu Posted January 22, 2013 Author Share Posted January 22, 2013 solved this by unmounting the disk and doing dd if=boot1h of=/dev/rdisk0s2 bs=4096 with chameleon. I also marked the partition as active, not sure if that was necessary. The difference was I had not used the bs=4096 option. Link to comment Share on other sites More sharing options...
Recommended Posts