Jump to content

hmulders
 Share

12 posts in this topic

Recommended Posts

Hi

recently I build my first mac based on below config:

 

Gigabyte GA-Z77N-WiFi Motherboard;

Intel Core i7-3770 3.4Ghz LGA1155 Qaud core;

TX650 Power supply;

EVGA GeForce GTX650 SC 1GB Graphics card;

Corsair Vengeance DDR3, 1600-16GB Kit (2x 8GB)

Sandisk Extreme 240 GB SSD

DSDT for the Motherboard used (F2)

Mountain Lion from App store installed

Info how to build gathered form another site.

In the first few days the mac was working without any issues but suddenly I did not get internet connection.

looking in the networksettings that where set to configure Ipv4 Via DHCP the ip address was far out of the in house ip range.

Is was in the order of 165.254.{censored}.{censored} and subnetmasking was changed to 255.255.0.0

I could not ping to the router. other computer in house work always without any issues

Power down and up sometimes fix it but also some times several start ups don't help.

I tried different ports on the hub and a different hub. Still not stable

I tried different network drivers and performed a cold start several times!

Works fine some days and gets flakky again.

On the other site no solution found but noticed that others face the same issue.

Does anyone here face the same isue or is this a known issue with this particular Gigabyte board?

Thanks a lot in advance for help or suggestions

 

Best regards

 

Hans

Link to comment
Share on other sites

Sorry forgot to mention.

It is the on board Network port, actually both ports face the same issue.

WIFI is not working at all but I was aware of that before I started the build.

Anyhow wireless is of no use for me, need fast (1GB Speed) due to NAS and Photoshop work.

the PCI slot is occupied by the graphic card so no option to install an extra ethernet card.

Link to comment
Share on other sites

  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...