chocoboss Posted December 24, 2013 Share Posted December 24, 2013 I knowww This is just an Athlon II X2 not phenom, so no L3 memory, even if core are nearly the same ( not rly, deneb > regor. 2 years between those ) I will have low score. That's why I have low result ( low cost CPU = low result ) It was just a try to see influence of OC on geek-bench Perform near 30% better so not bad. It is 100% stable so fully usable 24/24, 7/7 1 Link to comment Share on other sites More sharing options...
gils83 Posted December 25, 2013 Share Posted December 25, 2013 CPU FX 6300 low cost ( 95 €) 294474 294612 2390639 2390644 Vcore=1,50 v / ratio x20=4000 Mhz/ ratio CPB x22.5=4500 Mhz the temperature value is right but not the voltage, the CPU idle is still amazing malgrès it is overclocked, the ambient room temperature is 20 ° C and the stock cooler is PS : no comment Link to comment Share on other sites More sharing options...
chocoboss Posted December 25, 2013 Share Posted December 25, 2013 Hum not bad, mine is not a 95 euro CPU but 40 euro XDDD I might buy the FX 6300 in january I think It would be rly better than mine :3 Also : multiplier is statik on mine so OC is a little harder Link to comment Share on other sites More sharing options...
gils83 Posted December 25, 2013 Share Posted December 25, 2013 je voulais dire que low cost CPU ne veut pas dire forcément low result I meant low cost CPU does not necessarily mean low result 1 Link to comment Share on other sites More sharing options...
chocoboss Posted December 26, 2013 Share Posted December 26, 2013 je voulais dire que low cost CPU ne veut pas dire forcément low result I meant low cost CPU does not necessarily mean low result I was working at mac donald's when I build my computer, earn 500 euros / month, so 100 was a lot for me XD but I agree FX6300 look like good. And since phenom x6 are not sold anymore FX6300 should be the best I can get for that price 1.50V as Vcore ? you will damage your CPU .. I'm in 32 ° C with OC +23% and 1.4V as Vcore. Ambient room temperature is 20 ° C. With VCore 1.45V I can easily run à 4Ghz I think but since max Vcore is "theoricaly" 1.4V I will not outside the limit Je comprend ne t'en fais pas Gil's Link to comment Share on other sites More sharing options...
gils83 Posted December 26, 2013 Share Posted December 26, 2013 look Vcore at 1,50 is safe , it's not red Vcore NB ?? (chipset Nord) ATI 760/780 is frequency stock CPU at frequency stock now , the CPU at frequency stock (3,5/4,1) = 94 W and CPU at 4.0/4,5 = 131 W !!! overclock is just for testing but the motherboard GA-78LMT S2P CPU supports only 95 W max, to solve this problem and especially avoid breakdowns of Mosfet, I added two small radiators for cooling, but to benefit from the economy even overclock, I kept C1E and C6 support for benefit frequency variations, ie the CPU runs at 1.4 in idle mode and 4.0 at work + turbo 4.5. hence the very low temperature even at rest overcloker in short FX 6300, I made a FX 6350 for € 95 1 Link to comment Share on other sites More sharing options...
gils83 Posted January 3, 2014 Share Posted January 3, 2014 2396987 Link to comment Share on other sites More sharing options...
carlo_67 Posted March 2, 2014 Share Posted March 2, 2014 1 Link to comment Share on other sites More sharing options...
spakk Posted March 2, 2014 Share Posted March 2, 2014 Verry nice Geekbench scores, carlo:D:huh: Link to comment Share on other sites More sharing options...
carlo_67 Posted March 2, 2014 Share Posted March 2, 2014 spakk I also made more 2 Link to comment Share on other sites More sharing options...
carlo_67 Posted March 5, 2014 Share Posted March 5, 2014 more and more 'top burst? 1 Link to comment Share on other sites More sharing options...
vbetts Posted March 6, 2014 Share Posted March 6, 2014 K10 and Bulldozer may not have the highest IPC or single core performance, but for apps that take advantage of multiple cores and threads AMD accelerates in! Link to comment Share on other sites More sharing options...
gils83 Posted December 6, 2014 Share Posted December 6, 2014 Athlon 5350 !! o/c at 2.1 !! Link to comment Share on other sites More sharing options...
Recommended Posts