Jump to content

Clover General discussion

Bootloader EFI Clover

  • Please log in to reply
5946 replies to this topic

#1081
Ritz Carltn

Ritz Carltn

    Ritz Carltn

  • Members
  • PipPipPipPip
  • 247 posts
  • Gender:Male
  • Interests:HP EliteBook 8540p,i7-820QM, 68CVD Ver F.0F, nVidia NVS5100M, ML with Clover

HDMI audio poping on 2007 iMac SMBIOS (Clover picked this SMBIOS). Mac Pro 3,1 or newer poping appears. Only on the latest version. Ideas?

On my MSI build in sig.


Ooops! why I don't think bout that? Big, thanks. ^ ^

#1082
Andy Vandijck

Andy Vandijck

    InsanelyMac Deity

  • Coders
  • 1,630 posts
  • Gender:Male
  • Location:Tienen
  • Interests:Programming stuff for Mac OS X...
    Hacking...
    Hard rock (also really big Metallica...
I'm pleased to announce that Clover is running fine on my PATA IDE drive.
Only 40 GB on the drive but it's enough for the system.
It works damn good.
The system is a lot more stable than with Chameleon.
In my opinion it's the best bootloader there is :D

#1083
Ritz Carltn

Ritz Carltn

    Ritz Carltn

  • Members
  • PipPipPipPip
  • 247 posts
  • Gender:Male
  • Interests:HP EliteBook 8540p,i7-820QM, 68CVD Ver F.0F, nVidia NVS5100M, ML with Clover
Cool!
Andy

I'm pleased to announce that Clover is running fine on my PATA IDE drive.
Only 40 GB on the drive but it's enough for the system.
It works damn good.
The system is a lot more stable than with Chameleon.
In my opinion it's the best bootloader there is :D



#1084
Ritz Carltn

Ritz Carltn

    Ritz Carltn

  • Members
  • PipPipPipPip
  • 247 posts
  • Gender:Male
  • Interests:HP EliteBook 8540p,i7-820QM, 68CVD Ver F.0F, nVidia NVS5100M, ML with Clover
MacBook Pro5,1 failed.
MacBook Pro6,1 failed.
iMac9,1 failed.
iMac12,2 failed.
iMac13,2 failed.
MacPro3,1 testing. finally failed.

HDMI audio poping on 2007 iMac SMBIOS (Clover picked this SMBIOS). Mac Pro 3,1 or newer poping appears. Only on the latest version. Ideas?

On my MSI build in sig.

Followings is NVEnabler Debug.

Feb 5 14:58:11 localhost kernel[0]: NVDANV50HAL loaded and registered.
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: init : begin
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: probe : probe
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: probe : ROM shadow enable
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: probe : patch PRAMIN
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: False ROM signature: 0x0000
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: probe : patch PROM
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: dcb table at offset 0x53f5
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: dcb numentries 16
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 0: 01000313
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 1: 08015392
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 2: 08014382
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 3: 02027362DSMOS has arrived
Feb 5 14:58:11 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Feb 5 14:58:11 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 4: 02026362
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: Raw DCB entry 5: 02049300
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: numentries = 16 num_outputs = 6
Feb 5 14:58:11 localhost kernel[0]: NVEnabler: found LVDS
Feb 5 14:58:11 localhost mds[53]: (Normal) FMW: FMW 0 0
Feb 5 14:58:11 localhost WindowServer[94]: Server is starting up
Feb 5 14:58:11 localhost digest-service[97]: label: default
Feb 5 14:58:11 localhost digest-service[97]: dbname: od:/Local/Default
Feb 5 14:58:11 localhost digest-service[97]: mkey_file: /var/db/krb5kdc/m-key
Feb 5 14:58:11 localhost digest-service[97]: acl_file: /var/db/krb5kdc/kadmind.acl
Feb 5 14:58:11 localhost digest-service[97]: digest-request: uid=0
Feb 5 14:58:11 localhost rpcsvchost[98]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
Feb 5 14:58:11 localhost digest-service[97]: digest-request: init request
Feb 5 14:58:11 localhost digest-service[97]: digest-request: init return domain: BUILTIN server: LOCALHOST
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: Channel 1: 01
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: Channel 2: 3e
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Model found: Unknown nVidia card
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG VRAM: 1024
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @0,compatible
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @0,device_type
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @1,compatible
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @1,nameNTFS driver 3.10 [Flags: R/W].
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @1,device_type
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @0,display-cfg
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @1,display-cfg
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property @0,name
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property hda-gfx
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property device_type
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: DEBUG Setting property vbiosNTFS volume name , version 3.1.
Feb 5 14:58:12 localhost kernel[0]: NVEnabler::probe fails
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: init : begin
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: probe : probe
Feb 5 14:58:12 localhost kernel[0]: NVEnabler: probe : ROM shadow enable
Feb 5 14:58:12 localhost stackshot[44]: Timed out waiting for IOKit to finish matching.

#1085
nateB

nateB

    InsanelyMac Protégé

  • Members
  • Pip
  • 21 posts

I am runnning 10.8.2 with Clover 1043 (UEFI boot) on a gigabyte GA-Z77X-UP5-TH with a GeForce GTX660...

I currently only inject FakeSMC and the Intel Ethernet driver

There are two issues I would like advice on:

1) Audio support. What is the "best" mechanism to enable the alc898 sound chip? My goal is to be as "vanilla" as possible, and to only install kexts in the EFI/kexts/10.8 directory or patch within Clover... I currently have audio working using HDAenabler1 and a patched AppleHDA, however they must be placed in S/L/E. Is there an alternate method to either enable these to go in EFI/kexts/10.8 or simply patch using Clover???

2) Whenever I try to wake from sleep (power button or pressing a key), the system instantly reboots. I see conflicting information that this is either a USB dsdt issue or a Clover bug... is there a fix/workaround for this?

Thanks,
-Jim


I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?

#1086
antone

antone

    InsanelyMac Protégé

  • Members
  • Pip
  • 1 posts

I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?



I'm in my preliminary research stage trying to put together a machine for a friend with a similar setup to yours. I'm wondering if you might have a link to some documentation on the GIGABYTE GA-Z77X-UP5 TH or if you were piecing it together as you went along.

The goal of using thunderbolt is for high speed data transfer and taking in video and outputting it to show live color correction. He's making it work via a MacBook pro, but is trying to get a more reasonable setup.

The problem I'm running into, is I haven't built a hackintosh in about five years. And I can only find one guide that has no discussion surrounding it. Also, this mobo isn't listed in the Wiki, which was a huge help to me in the past.

If you have any links that could point me in the right right direction, I'd be grateful. Thanks!

#1087
Andy Vandijck

Andy Vandijck

    InsanelyMac Deity

  • Coders
  • 1,630 posts
  • Gender:Male
  • Location:Tienen
  • Interests:Programming stuff for Mac OS X...
    Hacking...
    Hard rock (also really big Metallica...
@dmazar: my pre boot.log with BIOS BlockIO boot7 and my dmesg from OS X ;-)

Attached Files



#1088
Ritz Carltn

Ritz Carltn

    Ritz Carltn

  • Members
  • PipPipPipPip
  • 247 posts
  • Gender:Male
  • Interests:HP EliteBook 8540p,i7-820QM, 68CVD Ver F.0F, nVidia NVS5100M, ML with Clover
Hi Andy and Slice,
I'd like to have you, two advice.
I have HP EliteBook 8540p with Clover.
It generally reboot before start windows, but, sometimes boot successfully.
there is no difference booting Log and reboot log.
I guess root cause is NVS 5100m and HDMI Audio.
I think about Andy's DeviceMergeNub.kext driver for this issue.
How about your opinion?
Or I think Slice already know this issue, right? ^ ^

I almost done except VGA, NVS5100M & HDMI Audio.
- lspci_list
http://pastebin.com/dJVRTZJK
Followings is boot.log & system.log.
- http://pastebin.com/7MTyyjdZ-
http://pastebin.com/L78FuwUB
IORegistry Explorer
http://www.mediafire...pduw9jnbklc8dsb

@dmazar: my pre boot.log with BIOS BlockIO boot7 and my dmesg from OS X ;-)

Attached Files



#1089
claver

claver

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 165 posts
  • Gender:Male
  • Interests:Informatica, musica, cinema e amici
Hi, how I can "import" my smbios.plist of chameleon in clover's config.plist?

This:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Credits</key>
<string>Created with Champlist</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBP61.88Z.0057.B0F.1112091028</string>
<key>SMboardproduct</key>
<string>Mac-F22586C8</string>
<key>SMfamily</key>
<string>MacBook Pro</string>
<key>SMproductname</key>
<string>MacBookPro6,2</string>
<key>SMserial</key>
<string>G80107DCAGU</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>

And... How I can hide a partition in the boot screen? I have read this topic but I haven't understood...
Thanks!

#1090
jimj

jimj

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts

I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?


I am not using USB injection.

Since originally positing i figured out I do not need HDAenabler1

I can upload my config.plist tonight.

-Jimj

I'm in my preliminary research stage trying to put together a machine for a friend with a similar setup to yours. I'm wondering if you might have a link to some documentation on the GIGABYTE GA-Z77X-UP5 TH or if you were piecing it together as you went along.

The goal of using thunderbolt is for high speed data transfer and taking in video and outputting it to show live color correction. He's making it work via a MacBook pro, but is trying to get a more reasonable setup.

The problem I'm running into, is I haven't built a hackintosh in about five years. And I can only find one guide that has no discussion surrounding it. Also, this mobo isn't listed in the Wiki, which was a huge help to me in the past.

If you have any links that could point me in the right right direction, I'd be grateful. Thanks!


I will be writing up the build of this machine once I am done tuning it...

At this point I only have one minor cosmetic issue to address and one functional issue. The cosmetic issue is due to a PCI card I am using that does not affect most people...

The ONLY functional issue at this time is that waking from sleep causes a reboot, and this is apparently a known issue for UEFI booting 10.8.2 according to slice...

This board is very easy to bring up. The only kexts needed are FakeSMC, AppleIntele1000e, and AppleHDA.

The only problem encountered using vanilla install with clover had to do with my choice of video card, which is not supported by 10.8.2. This required me to remove the Nvidea drivers from the BaseSystem image of InstallESD to get vanilla install to work. If you want to use #####/##### install it will just work.

-Jimj

#1091
alexanderq

alexanderq

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 215 posts
  • Gender:Male

Hi, how I can "import" my smbios.plist of chameleon in clover's config.plist?

This:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Credits</key>
<string>Created with Champlist</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBP61.88Z.0057.B0F.1112091028</string>
<key>SMboardproduct</key>
<string>Mac-F22586C8</string>
<key>SMfamily</key>
<string>MacBook Pro</string>
<key>SMproductname</key>
<string>MacBookPro6,2</string>
<key>SMserial</key>
<string>G80107DCAGU</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>

And... How I can hide a partition in the boot screen? I have read this topic but I haven't understood...
Thanks!


Clover does automatic model injection based on your hardware but if you want to change somethingl

How port from Chameleon Smbios.plist to Clover config.plist

From smbios.plist (Chameleon)

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosdate</key>
<string>08/03/10</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MP31.88Z.006C.B05.0903051113</string>
<key>SMboardproduct</key>
<string>Mac-F2268DC8</string>
<key>SMfamily</key>
<string>MacPro</string>
<key>SMmanufacturer</key>
<string>Apple Inc.</string>
<key>SMproductname</key>
<string>MacPro3,1</string>
<key>SMserial</key>
<string>ElEvEnChArS</string>
<key>SMsystemversion</key>
<string>1.3</string>
</dict>
</plist>
to confing.plist (Clover)

....
<key>SMBIOS</key>
<dict>
<key>BiosVendor</key>
<string>Apple Inc.</string>
<key>BiosVersion</key>
<string>MP31.88Z.006C.B05.0802291410</string>
<key>BiosReleaseDate</key>
<string>08/03/10</string>
<key>Manufacturer</key>
<string>Apple Inc.</string>
<key>ProductName</key>
<string>MacPro3,1</string>
<key>Version</key>
<string>1.3</string>
<key>Family</key>
<string>MacPro</string>
<key>SerialNumber</key>
<string>ElEvEnChArS</string>
<key>SmUUID</key>
<string>00000000-0000-X000-X000-XXXXXXXXXXXX</string>
<key>BoardManufacturer</key>
<string>Apple Inc.</string>
<key>BoardSerialNumber</key>
<string>C02032101R5DC771H</string>
<key>Board-ID</key>
<string>Mac-F42C88C8</string>
</dict>
....
and for the volumes hiding put this in config.plist and boot.log can be generated in clover menu by presing F2


<key>HideVolumes</key>
<dict>
<key>0</key>
<dict>
<key>VolumeString</key>
<string>String or it's part from boot.log</string>
</dict>

#1092
carbo178

carbo178

    InsanelyMac V.I.P.

  • Local Moderators
  • 6,763 posts
  • Gender:Male
  • Location:Dalle paludi della Pianura Padana

Hi, how I can "import" my smbios.plist of chameleon in clover's config.plist?

This:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Credits</key>
<string>Created with Champlist</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBP61.88Z.0057.B0F.1112091028</string>
<key>SMboardproduct</key>
<string>Mac-F22586C8</string>
<key>SMfamily</key>
<string>MacBook Pro</string>
<key>SMproductname</key>
<string>MacBookPro6,2</string>
<key>SMserial</key>
<string>G80107DCAGU</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>

And... How I can hide a partition in the boot screen? I have read this topic but I haven't understood...
Thanks!


For SMBIOS just add this string:


<key>SMBIOS</key>
<dict>
<key>ProductName</key>
<string>MacPro3,1</string>
</dict>

Replace MacPro3,1 with your.

Ciao

#1093
jimj

jimj

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts

I'm facing the same thing. Launching any application after waking from Sleep crashes the machine. What's your config.plist looking like? Are you using USB injection?


Here is my config.plist...
-JimJ


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SystemParameters</key>
<dict>
<key>boot-args</key>
<string>slide=0</string>
<key>prev-lang:kbd</key>
<string>en:0</string>
<key>InjectSystemID</key>
<string>Yes</string>
<key>LegacyBoot</key>
<string>PBR</string>
</dict>
<key>Pointer</key>
<dict>
<key>Speed</key>
<string>8</string>
</dict>
<key>Graphics</key>
<dict>
<key>GraphicsInjector</key>
<string>No</string>
<key>PatchVBiosBytes</key>
<dict>
<key>Find</key>
<data>gAeoAqAF</data>
<key>Replace</key>
<data>gAeoAjgE</data>
</dict>
</dict>
<key>SMBIOS</key>
<dict>
<key>ProductName</key>
<string>iMac12,2</string>
</dict>
<key>PCI</key>
<dict>
<key>HDAInjection</key>
<string>0x1</string>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>KextsToPatch</key>
<dict>
<key>0</key>
<dict>
<key>Name</key>
<string>IOAHCIBlockStorage</string>
<key>Find</key>
<data>QVBQTEUgU1NEAA==</data>
<key>Replace</key>
<data>AAAAAAAAAAAAAA==</data>
</dict>
<key>1</key>
<dict>
<key>Name</key>
<string>AppleAHCIPort</string>
<key>Find</key>
<data>RXh0ZXJuYWw=</data>
<key>Replace</key>
<data>SW50ZXJuYWw=</data>
</dict>
</dict>
</dict>
</dict>
</plist>

I'm in my preliminary research stage trying to put together a machine for a friend with a similar setup to yours. I'm wondering if you might have a link to some documentation on the GIGABYTE GA-Z77X-UP5 TH or if you were piecing it together as you went along.

The goal of using thunderbolt is for high speed data transfer and taking in video and outputting it to show live color correction. He's making it work via a MacBook pro, but is trying to get a more reasonable setup.

The problem I'm running into, is I haven't built a hackintosh in about five years. And I can only find one guide that has no discussion surrounding it. Also, this mobo isn't listed in the Wiki, which was a huge help to me in the past.

If you have any links that could point me in the right right direction, I'd be grateful. Thanks!


UPDATE:

I tried an Apple Thunderbolt to Gigabit Ethernet dongle - worked flawlessly.

-JimJ

#1094
ameris_cyning

ameris_cyning

    I don't know what to write here

  • Donators
  • 956 posts
  • Gender:Male
  • Location:My apartment
  • Interests:OSx86, female anatomy, electronic music, Clover EFI

Here is my config.plist...
-JimJ


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SystemParameters</key>
<dict>
<key>boot-args</key>
<string>slide=0</string>
<key>prev-lang:kbd</key>
<string>en:0</string>
<key>InjectSystemID</key>
<string>Yes</string>
<key>LegacyBoot</key>
<string>PBR</string>
</dict>
<key>Pointer</key>
<dict>
<key>Speed</key>
<string>8</string>
</dict>
<key>Graphics</key>
<dict>
<key>GraphicsInjector</key>
<string>No</string>
<key>PatchVBiosBytes</key>
<dict>
<key>Find</key>
<data>gAeoAqAF</data>
<key>Replace</key>
<data>gAeoAjgE</data>
</dict>
</dict>
<key>SMBIOS</key>
<dict>
<key>ProductName</key>
<string>iMac12,2</string>
</dict>
<key>PCI</key>
<dict>
<key>HDAInjection</key>
<string>0x1</string>
</dict>
<key>KernelAndKextPatches</key>
<dict>
<key>KextsToPatch</key>
<dict>
<key>0</key>
<dict>
<key>Name</key>
<string>IOAHCIBlockStorage</string>
<key>Find</key>
<data>QVBQTEUgU1NEAA==</data>
<key>Replace</key>
<data>AAAAAAAAAAAAAA==</data>
</dict>
<key>1</key>
<dict>
<key>Name</key>
<string>AppleAHCIPort</string>
<key>Find</key>
<data>RXh0ZXJuYWw=</data>
<key>Replace</key>
<data>SW50ZXJuYWw=</data>
</dict>
</dict>
</dict>
</dict>
</plist>


iMac12,2 could be the problem of why your computer crashes after sleep.

#1095
jimj

jimj

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts

iMac12,2 could be the problem of why your computer crashes after sleep.


What would you suggest?

#1096
ameris_cyning

ameris_cyning

    I don't know what to write here

  • Donators
  • 956 posts
  • Gender:Male
  • Location:My apartment
  • Interests:OSx86, female anatomy, electronic music, Clover EFI

What would you suggest?


Try changing it back to the preferred MacPro3,1

#1097
tical2k

tical2k

    InsanelyMac Protégé

  • Members
  • PipPip
  • 59 posts
  • Gender:Male
I have an odd problem I was hoping to get answered. If I enable CSM on my Asus G75VW (has Asus GeForce GTX 670m) I can boot fine, but sleep does not work. If I boot with CSM off and pure UEFI boot, I get instant reboot. I've traced this to the graphics kexts. If I move the NV* kexts out of the way, it boots fine in pure UEFI. Sleep appears to work, but the screen does not turn off. (The mouse becomes unresponsive until I press the power button). When I boot with the kexts and CSM, I see "cannot shadow vbios." Has anyone seen this before? It'd appear the graphics injector isn't working correctly or I have some bad settings. Any help would be appreciated! (oh this is ML 10.8.2)

#1098
theconnactic

theconnactic

    Stubborn AMD user

  • Local Moderators
  • 2,944 posts
  • Gender:Male
Back in the Clover boat! :)

Installation, as before, was seamless and to use and tweak the config.plist, very intuitive. For the first time i have it on my HDD (in fact, booting from it on two of my hacks) and i spent just over an hour to get all the functionalities i had with Chameleon.

A question: how do i fix both the Clover boot screen and Apple boot screen resolutions? I'd love to get rid of that stretched, ugly resolution i'm having...

Best regards!

#1099
mani_bond007

mani_bond007

    InsanelyMac Protégé

  • Members
  • Pip
  • 10 posts
Clover is not detecting Windows 7 .
EFI partition is disk0s1
Windows is disk0s2
OS X is disk0s3
Only OSX is detected.
HOw can i get clover to detect Windows 7.
DO i need to add some files drivers64UEFI?
I can see Windows partition [NTFS] when i boot into OSX but clover cannot detect windows 7.
Any ideas why?
UX31A OS X ML 10.8.2

#1100
magnifico

magnifico

    InsanelyMac Deity

  • Donators
  • 2,478 posts
  • Gender:Male

Clover is not detecting Windows 7 .
EFI partition is disk0s1
Windows is disk0s2
OS X is disk0s3
Only OSX is detected.
HOw can i get clover to detect Windows 7.
DO i need to add some files drivers64UEFI?
I can see Windows partition [NTFS] when i boot into OSX but clover cannot detect windows 7.
Any ideas why?
UX31A OS X ML 10.8.2


Your mainboard?





Also tagged with one or more of these keywords: Bootloader, EFI, Clover


6 user(s) are reading this topic

3 members, 2 guests, 1 anonymous users


© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy