Jump to content

[Aiuto] Post installazione su Pavilion g6

Madgab

By Madgab,
in Notebook

 Share
17 posts in this topic

Recommended Posts

Madgab
Madgab
Posted
Posted

Nonostante non abbia avuto riscontro, qui sul forum e in rete, ho provato comunque ad installare ML sul mio notebook HP Pavilion G6 (ne esistono non so quanti e non riesco a capire che versione sia il mio).

 

L'nstallazione, non avendo guide in proposito, è stata complicato ma alla fine ci sono riuscito. Al momento ho chimera 1.11.

 

Ieri sera sono andato a dormire tutto contento, ho praticamente messo tutto, audio, controllo batteria, wi-fi e tutto funziona, persino la webcam integrata. Stamattina però accendo il laptop e sorpresa, Kernel Panic. Riavvio più volte e sempre la setessa cosa. A questo punto provo ad entrare in sae mode ma nulla. Stavo per arrendermi, ma faccio un ultimo paio di tentativi. Avvio più volte con -v e dopo un paio di riavvi riesco ad entrare, sempre con -v. A questo punto riavvio ed ecco nuovamente il Kernel Panic, riavvio con -v e riesco ad entrare. Insomma se non uso -v non entro nel computer. Da cosa può dipendere? Premetto che ieri sera riavviavo in continuazione e non è mai successo nulla. Qualche volta anche non -v non va, l'avvio si ferma a

 

" System uptime in nanosecond: .......... "

 

Poi magari riavvio ancora con -v e parte, solitamente per ogni kernel panic che ho devo riavviare lo stesso numero di volte con -v, assurdo.

 

Di seguito vi posto il mio org.chameleon.Boot.plist

 


<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
   <key>Boot Banner</key>
   <string>No</string>
   <key>GraphicsEnabler</key>
   <string>No</string>
    <key>Instant Menu</key>
    <string>Yes</string>    
    <key>Kernel Flags</key>
   <string>PCIRootUID=0</string>
    <key>Kernel Flags</key>
   <string>cpus=1</string>
   <key>Legacy Logo</key>
   <string>Yes</string>

</dict>
</plist>

 

Come vedete non ho nulla di particolare eccetto quel cpus=1 senza il quale, anche in fase di installazione il computer va sempre in Kernel Panic

 

Adesso smbios.plist:

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
   <key>SMbiosversion</key>
   <string>######.tonymacx86.com</string>
   <key>SMboardproduct</key>
   <string>Mac-94245B3640C91C81</string>
   <key>SMfamily</key>
   <string>MacBook Pro</string>
   <key>SMproductname</key>
   <string>MacBookPro8,1</string>
   <key>SMserial</key>
   <string>C02F93FQDH2G</string>
</dict>
</plist>

 

Ovviamente è tutto per macbook pro altrimenti non vado da nessuna parte.

 

Per quello che riguarda i kext magari se ne discute di volta in volta, ho messo il voodooHDA.kext per l'audio, a quanto pare un aversione pachata perchè la mia scheda audio (di cui conosco solo la dicitura : HP IDT HD Audio) o non è supportata o non so come farla funzionare.

 

Altri kext sono classici, NullcpuPowerManagment e altre cosarelle solitamente contenute in ######

 

Spero tanto possiate aiutarmi, perchè sono proprio vicino al completameno, come ho detto ero addirittura convinto di aver finito, se non fosse per questa cosa strana che stà succedendo.

 

Grazie in anticipo

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

Hi, thanks for replie!

 

I now re-install the osx ( i have create many problems to resolve one ). Meanwhile, can you tell me where should i put the file mach_kernel that you have post me? In Extra with org.chameleon.Boot.plist?

 

Thank, i'll keep you updated

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

Ok, i have problems!

 

After backup of mach_kernel file i delete it, and i copy the new in the Volumes, how i can install it? Now the new mach_kernel file is visible in the volumes but if i restart :

 

1= i continue to add cpus=1

2= keyboard not work.

 

I think that there is a problem of istallation of mach_kernel?

 

HELP ! Thanks

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

I have repair permission with utility disk. Not is the same thing?

 

Ok, i'use kextwizard but i have another question.

 

What extra kext i have to add in extra/exstantion/ ? Now i have copiated only your extra folter exactly as you have posted me. I need other kext? es: NullCPUPowerManagement or EvOreboot or AHCI_3rdParty_SATA or ApplePS2Controller or IONetworkingFamily.

 

Then when i copy new mach_kernel in volume appear windows that say that is impossible to copy beacause actual mach_kernel is invisible. Is correct to delete old_mach_kernel and copy in the new? ( the new kernel remain visible )

 

Thanks for help

Link to comment
Share on other sites
iFIRE
iFIRE
Posted
Posted

Yessss, delete original kernel and put Lapic kernel, for keyboard

ApplePS2Controller + AppleACPIPS2Nub.kext, for prevent kernel panic

NullCPUPowerManagement

, for reboot if

necessary EvOreboot, for Ethernet and wifi see your model whit app SystemInfo mac and search in kext.com

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

Again !

 

I have installed all kext that you sugest me (no mach_kernel) but if i turn off pc and then restart it, Kernel Panic. Previusly, i restart only the pc and all work.

Maybe audio that not work correctly? Because after install audio work but don't work the volume, it was fix.

 

I don't know how think!

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

Ok, after a lot of problems and a night, i have know the king of problems. ViidooHDA. After it installation kernel panic is costantly, i can put into system just one time, after i have always kernel panic, i can boot with -v-x . Do you have other kext for my audio card ? Maybe my audio card is different from the kext?

 

Thanks for help.

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

Hi, i have resolved my problem, for the sound i have resolve with applehdadisable.kext. Kernel now is perfect, i boot without cpus=1. My only problem remain facetime and icloud, i can't connect with my apple id, i have create a smbio.plist with chameleon wizard but nothing work. Can you help me?

 

Thanks

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

Thank for replie, but unfortunatly not work. For clarity i port you my actual org.chameleon.Boot.plist

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>DSDT</key>
<string>/Extra/DSDT.aml</string>
<key>Default Partition</key>
<string>hd(0,2)</string>
<key>DropSSDT</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>Hide Partition</key>
<string>hd(0,2)</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>darkwake=0</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>SMBIOS</key>
<string>/Extra/smbios.plist</string>
<key>SystemId</key>
       <string>0a92fa40-26a5-11e2-81c1-0800200c9a66</string>
<key>SystemType</key>
<string>2</string>
<key>Timeout</key>
<string>2</string>
<key>USBBusFix</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>busratio</key>
<string>24</string>
<key>device-properties</key> <string>4b00000001000000010000003f0000000100000002010c00d041030a0000000001010600011c0101060000007fff0400160000006200750069006c0074002d0069006e0000000500000001</string>

</dict>
</plist>

 

My actual smbios.plist

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosversion</key>
<string>######.tonymacx86.com</string>
<key>SMboardproduct</key>
<string>Mac-94245B3640C91C81</string>
<key>SMfamily</key>
<string>MacBook Pro</string>
<key>SMmemtype</key>
<string>24</string>
<key>SMproductname</key>
<string>MacBookPro8,1</string>
<key>SMserial</key>
<string>C02J49O3DH2G</string>

</dict>
</plist>

 

My smbios was created with chameleon wizard

 

Thanks for help

Link to comment
Share on other sites
Madgab
Madgab
Posted
  • Author
Posted

Perfect, i sensed this thing but i can't to install my ethernet card. From systrem info i see that my ethernet card is RTL8101E / 8102E but i can't find the kext . Vendor id 10ec and device id 8136 . From the first installation ethernet is present in network, after installation of extra that you sugested me this ethernet is always connected but i have not inserted any cable. Actualy i navigate with wi-fi (i have finded the io802family.kext modified). Do you have a kext safely for my network card ? I tried a lot of kext but not work or created kernel panic and i was forced to re-install osx.

 

Actualy i used thi kext that apparently not create problems but i sure that it isn't very good .

 

I'm waiting for response

 

Thanks a lot!

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...