kali2000 Posted October 27, 2012 Share Posted October 27, 2012 Hi friends!!! I'm running Mountain Lion 10.8.2 in my K53SC. All work fine except nVidia optimus and card reader. I know optimus not have solution at the moment and does not worry me because HD3000 work fine, but need help with my card reader. My card reader is a USB2.0-CRW from Realtek. It have: DivID: 0x0139=313 VenID: 0x0bda=3034 I have tried several methods to it work, but I did not succeed. (AnyCardReader, Voodoo, Add DivID&VenID). The card reader is detected, but not configured. Can anyone make me some suggestion about solving the problem? I have added a picture for you can see the problem. Thanx in advance!!! Link to comment Share on other sites More sharing options...
Hacktrix2006 Posted October 28, 2012 Share Posted October 28, 2012 i have the very same Card Reader as well, also tried many kexts file and still have no luck. Have you managed to get any further? Link to comment Share on other sites More sharing options...
kali2000 Posted October 29, 2012 Author Share Posted October 29, 2012 No, no luck. apparently, the only solution is port the kext from Linux. We hope that some privileged mind can do it. Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted February 22, 2013 Share Posted February 22, 2013 I got that card reader to work by just inserting device ID and vendor ID into the plist of AppleUSBCardReader.kext inside AppleStorageDrivers.kext. Reader is listet in sysprofiler under Card Readers and inserted cards show up as such in Finder. Don't know if this info is still of use for the thread starter, but it may be for others using this device 2 Link to comment Share on other sites More sharing options...
kali2000 Posted March 2, 2013 Author Share Posted March 2, 2013 I got that card reader to work by just inserting device ID and vendor ID into the plist of AppleUSBCardReader.kext inside AppleStorageDrivers.kext. Reader is listet in sysprofiler under Card Readers and inserted cards show up as such in Finder. Don't know if this info is still of use for the thread starter, but it may be for others using this device I beg to differ, because I tried that with no luck. Can you put an image similar to the one in the first post to check the veracity of what you're saying? Thanx in advance... Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted March 2, 2013 Share Posted March 2, 2013 Here you go: usbcrw20-1.tiff usbcrw20-2.tiff usbcrw20-3.tiff Link to comment Share on other sites More sharing options...
jl4c Posted March 4, 2013 Share Posted March 4, 2013 (edited) Hi, i've a bit different card reader on my laptop and i can't make it work. USB2.0-CRW: Product ID: 0x0129 Vendor ID: 0x0bda (Realtek Semiconductor Corp.) Version: 39,60 Serial Number: 20100201396000000 Speed: Up to 480 Mb/sec Manufacturer: Generic Location ID: 0x1a130000 / 3 Current Available (mA): 500 Current Required (mA): Unknown (Device has not been configured) I appreciate any help. Edited March 4, 2013 by jl4c Link to comment Share on other sites More sharing options...
jl4c Posted March 6, 2013 Share Posted March 6, 2013 bump Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted March 6, 2013 Share Posted March 6, 2013 What OS X version do you use? Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted March 6, 2013 Share Posted March 6, 2013 Try this kext. It goes in plugins folder of AppleStorageDrivers.kext in S/L/E From OS X 10.8.2 AppleUSBCardReader.kext.zip Link to comment Share on other sites More sharing options...
jl4c Posted March 6, 2013 Share Posted March 6, 2013 Am on 10.8.2 Thanks for the kext, but doesn't work Link to comment Share on other sites More sharing options...
Lordadmiral Drake Posted March 6, 2013 Share Posted March 6, 2013 Hmm, then maybe these drivers are quite selective and I just got lucky Link to comment Share on other sites More sharing options...
romaincs Posted August 24, 2013 Share Posted August 24, 2013 Same problem here, any news about this device ? Link to comment Share on other sites More sharing options...
Hacktrix2006 Posted September 8, 2013 Share Posted September 8, 2013 Anyone managed to get this SD-Card reader working yet. DivID: 0x0139=313VenID: 0x0bda=3034 I have found on mine that its connected to the USB3.0 as with USB 3.0 from NEC the USB-CRW doesn't even show. Reason i ask is ordadmiral Drake has the following DivID: 0x0139=312VenID: 0x0bda=3034 with everything working yet the DivID: 0x0139=313 VenID: 0x0bda=3034 is not working as the last mA reading is not detecting. Link to comment Share on other sites More sharing options...
Kataryno Posted September 15, 2013 Share Posted September 15, 2013 My problem is exactly the opposite. I have your card reader too, and it works on 10.8.2, but i want to disable it, because, when it's loaded i cannot have the usb ports working... Link to comment Share on other sites More sharing options...
romaincs Posted September 15, 2013 Share Posted September 15, 2013 I would do that : Look at your system profiler and look for the kext that is loaded for it and then move it out from your extension folder. Rebuild kext cache and reboot. Link to comment Share on other sites More sharing options...
Kataryno Posted September 15, 2013 Share Posted September 15, 2013 I would do that : Look at your system profiler and look for the kext that is loaded for it and then move it out from your extension folder. Rebuild kext cache and reboot. It's the same kext that load USB ports, sometimes loads the camera and card reader, others the usb ports... AppleUSBEHCI. Strange is i did not find this specific kext on S/L/E... Link to comment Share on other sites More sharing options...
romaincs Posted September 15, 2013 Share Posted September 15, 2013 Inside AppleStorageDrivers.kext, you have in Content a PlugIns folder. Inside it, you should have AppleUSBCardReader.kext Link to comment Share on other sites More sharing options...
Kataryno Posted September 15, 2013 Share Posted September 15, 2013 Oh, thanks I will try it. Just another thing, I have another kexts, like AppleUSBEthernet, AppleUSBAudio, etc. From your experience, you think that this kexts may be the responsible as well to this situation? Link to comment Share on other sites More sharing options...
romaincs Posted September 15, 2013 Share Posted September 15, 2013 I don't realy know, but I don't think. You're welcome ! Link to comment Share on other sites More sharing options...
Kataryno Posted September 16, 2013 Share Posted September 16, 2013 Inside AppleStorageDrivers.kext, you have in Content a PlugIns folder. Inside it, you should have AppleUSBCardReader.kext I take your suggestion and cleaned that kext, but without succeed. However I have an update of the situation, if you could pass on my topic to not hijack this one with my problem... Thanks in advance 1 Link to comment Share on other sites More sharing options...
vandebergz Posted October 12, 2015 Share Posted October 12, 2015 Anyone with 0129 0bda got this card reader working? Link to comment Share on other sites More sharing options...
Nat-x Posted November 23, 2015 Share Posted November 23, 2015 once in applecardreader.kext what do you do? im assuming add the vendor and device id somewhere in the info.plist but where? also i have the 0129 obda card.. im in 10.11 el capitan btw Link to comment Share on other sites More sharing options...
ahmednoori94 Posted April 20, 2016 Share Posted April 20, 2016 i has this on 10.11 any luck on this project??? Link to comment Share on other sites More sharing options...
Recommended Posts