Jump to content

ASUS Zenbook Prime UX31A-DB51 Ultrabook - fixes, mods, tweaks, etc


  • Please log in to reply
985 replies to this topic

#981
lahana1

lahana1

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts

It should be work, Under System Report > Power Should show:

Battery Information:

 

  Model Information:

  Serial Number: UX32-65- 

  Manufacturer: ASUSTeK

  Device Name: UX32-65

  Charge Information:

  The battery's charge is below the critical level.: No

  The battery's charge is below the warning level.: No

  Charge Remaining (mAh): 5459

  Fully Charged: Yes

  Charging: No

  Full Charge Capacity (mAh): 5524

  Health Information:

  Cycle Count: 107

  Condition: Normal

  Battery Installed: Yes

  Amperage (mA): 0

  Voltage (mV): 8319

 

 

 

You must be firmly use our version FAKESMC.kext(with sensor kext) and DSDT (patched for battery) and the config.plist together.

Don't put any FAKESMC.kext under System/Library/Extensions.

 

here is our full clover EFI folder

 

 

 

So only need to copy all 

1. Copy all "Clover" folder to EFI.

2. copy "TO SYSTEM FOLDER" kext to System/Library/Extensions folder  (I changed use the on-the-fly clover kext patch the ALC269 for better sound and sleep).

3. open the clover configuration and just set smbios 

4. rebuild kext cache  by kext utility.

 

battery worked

atheros wifi at this time does not run 9285



#982
chlee

chlee

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts

battery worked

atheros wifi at this time does not run 9285

you need autheros kext to make it work. My version injected just BCM94352 driver.



#983
lahana1

lahana1

    InsanelyMac Protégé

  • Members
  • Pip
  • 5 posts

you need autheros kext to make it work. My version injected just BCM94352 driver.

 

HD4000 does not work but it did not work I got was 0x01660000-0x01660009 7 mb seems

 

screen is not transparent 



#984
leukhin

leukhin

    InsanelyMac Protégé

  • Members
  • Pip
  • 44 posts
  • Gender:Male
  • Location:Ukraine

Hi all!

 

I got a problem with installation of Yosemite on Asus Zenbook UX32A. Everything that I found I have posted in this thread. If you guys got a minute, please take a look on my problem. Thanks a lot!



#985
spectredev

spectredev

    InsanelyMac Protégé

  • Members
  • Pip
  • 9 posts

Oke, i will test that when i'm home ;)

yeah the extentions are not needed for the installation? right?

and what you say about the AppleIntelCPUPowerManagement.kext do i have to put it in my usb or not? and is NullCpuPowerManagement.kext needed? 

 

thanks for your support

 

Did you manage to get this working?



#986
Centurion2005

Centurion2005

    InsanelyMac Protégé

  • Members
  • Pip
  • 3 posts
  • Gender:Male
  • Location:Russia

Hi All!

i have asus ux31a (i5,4gb,128SSD). i changed wlan module on compatible ar5b9195(bt+wifi)

i installed os x 10.10

Works: wireless, bluetooth, audio.

Not works: multitouch, card reader, does not change the brightness

 

I have a problem with the appearance of motion artifacts when the system starts on HD4000. Close and open of cover can solve problem.

who knows how to solve the problem?

 

bootloader: Clover 2988

ig-platform-id = 0x01660009

Duallink = 0

vram = 512

I suppose that maximum vram of bios is 512mb but system wants 1024 of maximum memory.

 

On chameleon i have same problem with graphics. On 10.8.3 graphics and brightness works 







1 user(s) are reading this topic

1 members, 0 guests, 0 anonymous users


© 2015 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy