smukamuka Posted September 21, 2012 Share Posted September 21, 2012 Ciao ragazzi! Ho da poco preso un Samsung Serie 5 Ultra, un ultrabook da pochi soldi ma con dalle caratteristiche decenti Volevo provare subito ad installarci Mac OSX, dato che le caratteristiche sonon molto simili a quelle degli ultimi Macbook Air, ed avendo già un fisso completamente funzionante con iAtkos L2, volevo installarlo pure qui. Ho quindi preso un lettore DVD usb e provato a far partire l'installazione, ma in pratica non carica nulla...Ho provato con queste modalità: - normale: compare la mela e nessun simbolo di caricamento - -v: non compare nessuna scritta - -v -s: compaiono delle scritte quando ancora c'è lo sfondo di iAtkos, quando sparisce ed arriva la schermata nera non si vede niente, e il lettore DVD smette di far girare il disco (succede in tutti e tre i casi) Il computer ha queste caratteristiche: - CPU i5-3317m (dovrebbe essere lo stesso del MacBook Air) - RAM: 6gb DDR3 1600MHz - VGA intel hd graphics 4000 (anche qui stessa dell'air) - HDD 500gb sata + 24gb SSD Ho anche provato a fare una chiavetta bootable con Mountain Lion ma non parte nulla :S Grazie!! EDIT: attualmente si sta provando Mountain Lion con boot via USB (link guida usata) Link to comment Share on other sites More sharing options...
cili0 Posted September 21, 2012 Share Posted September 21, 2012 allega la foto della schermata quando si blocca. BTW, bel portatile ciao! Link to comment Share on other sites More sharing options...
smukamuka Posted September 21, 2012 Author Share Posted September 21, 2012 Grazie, non è male per il prezzo (620) in effetti Allora, avviando con -v -s compaiono prima le seguenti scritte: https://www.dropbox.com/s/bbkiwb7jnzd3ggq/2012-09-21%2017.14.20.jpg?m E poi semplicemente sparisce la schermata e ne compare una nera, così: https://www.dropbox.com/s/xfgo56hc18mssib/2012-09-21%2017.14.32.jpg Dopo qualche secondo dall'apparizione della seconda schermata, il lettore dvd si ferma... Link to comment Share on other sites More sharing options...
iFIRE Posted September 21, 2012 Share Posted September 21, 2012 use this boot flag and SMBIOS MacBookPro9,1 -x -f -v GraphicsEnabler=No PciRootUID=0 npci=0x3000 Link to comment Share on other sites More sharing options...
smukamuka Posted September 22, 2012 Author Share Posted September 22, 2012 use this boot flag and SMBIOS MacBookPro9,1 -x -f -v GraphicsEnabler=No PciRootUID=0 npci=0x3000 Ho provato, carica molti più file, ma poi arriva sempre alla solita schermata nera, e lì il lettore si spegne e non succede più nulla però non so cosa intendi per usare l'smbios, cioè devo mettere il plist da qualche parte prima di far partire l'installazione? --- I tried it, it works for 2-3 minutes loading files but after that there's a black screen and the optical drive stops working again how must i use the smbios? Must I place the plist file somewhere before installation? Grazie!! Link to comment Share on other sites More sharing options...
cili0 Posted September 23, 2012 Share Posted September 23, 2012 Significa che devi preparare un SMBIOS.plist, specificando al suo intenro che il tuo PC è un MacBookPro9,1 e poi riporre questo file in /E/E dentro la chiavetta, Link to comment Share on other sites More sharing options...
smukamuka Posted September 23, 2012 Author Share Posted September 23, 2012 Capito, solo che ho provato più volte a fare il boot da chiavetta e non ci riesco :S Ho provato sia con Utility disco (Ho Lion 10.7.2 sul fisso, sempre iAtkos L2) tramite Ripristina e mi da errore quando copia i file, sia con un altro tool chiamato Lion DiskMaker...E da lì la creazione della USB Boot funziona solo che il portatile non me la identifica come possibile periferica di boot... EDIT: Ok sono riuscito a fare una usb bootable seguendo una guida qui su insanelymac...Però non riesco a trovare un smbios per macbookpro9,1, la guida (questa, usando il dmg di mountain lion), ma solamente quello del mbpro8,1, (c'era fino a 8,3...) Con questo smbios arrivo un po' più avanti, fino a questa schermata: https://www.dropbox....23 17.12.52.jpg EDITx2: Eliminando AppleIntelCPUPowerManagement.kext ho la seguente schermata: https://www.dropbox.com/s/fa7skhpn093jh19/2012-09-23%2017.25.31.jpg?m Link to comment Share on other sites More sharing options...
iFIRE Posted September 23, 2012 Share Posted September 23, 2012 here you have smbios 9.1 smbios.plist.zip Link to comment Share on other sites More sharing options...
smukamuka Posted September 23, 2012 Author Share Posted September 23, 2012 here you have smbios 9.1 smbios.plist.zip Thanks! I replaced the kext deleted beforebut now I get the same kernel panic! https://www.dropbox....23 17.33.48.jpg mbpro9,1 smbios placed both in /extra and /extra/extensions Link to comment Share on other sites More sharing options...
iFIRE Posted September 23, 2012 Share Posted September 23, 2012 very easy, install NULCPUPowermanegent.kext in Extra/Extensions and use this boot flag: -x -f -v GraphicsEnabler=No PciRootUID=0 npci=0x3000 Link to comment Share on other sites More sharing options...
smukamuka Posted September 23, 2012 Author Share Posted September 23, 2012 very easy, install NULCPUPowermanegent.kext in Extra/Extensions and use this boot flag: -x -f -v GraphicsEnabler=No PciRootUID=0 npci=0x3000 I Found a Working (probabily, because now the "error" has changed AppleIntelCPUPowerManagement.kext for ML. Now I get this: https://www.dropbox.... 17.51.21.jpg?m Thank you very much! EDIT: tried also adding NULLCPUPowermanagement in e/e and restoring original AppleIntelCPUPowetManagement but I get the same message Link to comment Share on other sites More sharing options...
iFIRE Posted September 23, 2012 Share Posted September 23, 2012 delete all kexts AppleIntel from S/L/E of your usbinstaller and try again with the boot flag Link to comment Share on other sites More sharing options...
smukamuka Posted September 23, 2012 Author Share Posted September 23, 2012 delete all kexts AppleIntel from S/L/E of your usbinstaller and try again with the boot flag Deleted AppleIntel* tried with boot flags (Until now I always tried with boot flags) Now is "still waiting for root device" https://www.dropbox.... 18.34.23.jpg?m Tried removing AppleFSCompressionTypeDataless.kext, and here's the result https://www.dropbox.... 18.41.36.jpg?m Tried also removing applefscompressiontypezlib.kext, result here: https://www.dropbox.com/s/viw1905oloabzus/2012-09-23%2018.47.32.jpg?m So I think the two kext deleted aren't the problem :S Link to comment Share on other sites More sharing options...
iFIRE Posted September 23, 2012 Share Posted September 23, 2012 put this kexts in S/L/E of your usb, backup your, and use the boot flag, but not use the -x IOPCIFamily.kext.zip Link to comment Share on other sites More sharing options...
smukamuka Posted September 23, 2012 Author Share Posted September 23, 2012 put this kexts in S/L/E of your usb, backup your, and use the boot flag, but not use the -x IOPCIFamily.kext.zip Tried it but nothing changed: https://www.dropbox....23 18.54.04.jpg (I replaced the two kext, AppleFSCompressionTypeDataless.kext and applefscompressiontypezlib.kext, previously deleted) Link to comment Share on other sites More sharing options...
iFIRE Posted September 23, 2012 Share Posted September 23, 2012 AppleACPIPlatform.kext.zip change this kexts too for S/L/E, backup your put in Extra Extensions.mkext.zip Link to comment Share on other sites More sharing options...
smukamuka Posted September 23, 2012 Author Share Posted September 23, 2012 Unfortunately it does not change Link to comment Share on other sites More sharing options...
smukamuka Posted September 25, 2012 Author Share Posted September 25, 2012 Creo un altro topic nella sezione giusta...ossia Moutain Lion per continuare Link to comment Share on other sites More sharing options...
Recommended Posts