Jump to content

Aggiornamento ML 10.8.2


joe2009
 Share

35 posts in this topic

Recommended Posts

Sul computer in firma tutto ok :king:

 

 

 

 

IMPORTANTE

 

Compatibilità di eventuali kext aggiuntivi (già funzionanti su 10.8 e 10.8.1):

 

 

1) Sleepenabler : OK

 

2) NullCPUPowerManagement: OK

 

3) ACPISensors: OK

 

4) FintekF718x: OK

 

5) IntelCPUMonitor: OK

 

6) ITEIT87x: OK

 

7) NSCPC8739x: OK

 

8) NuvotonNCT677x: OK

 

9) NVClockX: OK

 

10) WinbondW836x: OK

 

11) OemSMBIOS: RIMUOVERE altrimenti la schermata d'avvio resta bloccata sulla mela

Link to comment
Share on other sites

Hai problemi causati sia dalla partizione NTFS che dalla scheda WiFi... ma è quest'ultima che impedisce il boot... se è presente uno switch fisico o un'impostazione bios...prova a disabilitarla

 

Niente da fare...nel bios non c'è nulla, switch fisico wi fi spento... Vorrei sottolineare che il disco è esterno!

 

post-1065993-0-90134200-1348246995_thumb.jpg

Link to comment
Share on other sites

Niente da fare...nel bios non c'è nulla, switch fisico wi fi spento... Vorrei sottolineare che il disco è esterno!

 

post-1065993-0-90134200-1348246995_thumb.jpg

 

Non credo che il problema sia il disco esterno...... l'aggiornamento a 10.8.2 ha comportato l'aggiornamento di molti kext infatti il "IO80211Family.kext" (quello che gestisce le periferiche WiFi) è stato aggiornato (è datato 13 settembre)...

...prova ad eliminare quello presente sul disco e sostituiscilo con la versione precedente.

Link to comment
Share on other sites

Non credo che il problema sia il disco esterno...... l'aggiornamento a 10.8.2 ha comportato l'aggiornamento di molti kext infatti il "IO80211Family.kext" (quello che gestisce le periferiche WiFi) è stato aggiornato (è datato 13 settembre)...

...prova ad eliminare quello presente sul disco e sostituiscilo con la versione precedente.

 

avresti il link? Non trovo nulla .-.

Link to comment
Share on other sites

ragazzi a me rimane con la schermata della mela , o cercato OemSMBIOS ma nn c'è nel mio hdd

oemSMBIOS è un kext contenuto in FakeSMC.kext-Contents-Plugins

Puoi eliminare oemSMBIOS.kext, riparare i permessi e riavviare oppure installare quello che ti ho messo in allegato.

Ciao

 

avresti il link? Non trovo nulla .-.

Estrailo dalla chiavetta di installazione di ML

FakeSMC.kext.zip

Link to comment
Share on other sites

Carbo, niente da fare rimane con la mela, sembra che carica ma solo con il comando -v -x da l'input però rimane con lo schermo bianco appare solo il Puntatore del Mouse.

Le o provate tutte con tutti i comandi del bot

Ho sostituito anche i Kexts delle schede Ati messe quelle del dvd, niente.

Credo che ci sia qualche kexts installato dell'Upgrade che impedisce il normale caricamento, ci sono arrivato a questo, perchè ho scompattato la relase 10.8.1 (fino con quella andava bene) e o visto che erano sono pochi kexts del sistema.

O dovuto formattare e o messo di nuovo Lion con upgrade 10.7.5, con Lion mai problemi.

Ciao

Link to comment
Share on other sites

  • 2 weeks later...

Comunque ho un problema anche con il wi fi, cliccando sull'icona mi dice "nessun hardware installato"

 

scheda wireless: Atheros AR9280 Wireless Network Adapter

 

 

 

 

Il problema della tua wifi si risolve così (bastava un pò di buona volontà ed una ricerca con Google):

 

 

 

if you encounter the “WiFi: no hardware installed”-error after installing OSX 10.8, do this :

- go to [your hard disk] –> System –> Library –> Extentions –> IO80211Family.kext

- CTRL-click on the IO80211Family.kext and select “Show Package Contents” from the pulldown menu

- then go to Contents –> Info.plist and drag the Info.plist to the Desktop

- CTRL-click on the Info.plist (the one on the Desktop) and select “Open with –> TextEdit” from the pulldown menu

- then, inside the Info.plist file, find and delete these line (found near the end) :

<key>OSBundleRequired</key>

<string>Network-Root</string>

- then select File –> Save to save the edited version of the Info.plist on your Desktop

- then, drag the Info.plist from the Desktop back onto the original version that is in System –> Library –> Extentions –> IO80211Family.kext –> Contents

- in the warning window that pops up, click on “Authenticate” and type your administrator login and password

…that should be it !

now your AR9280 should be recognized by OSX 10.8 “Mountain Lion”, and the “WiFi: no hardware installed”-error should be gone

Link to comment
Share on other sites

Il problema della tua wifi si risolve così (bastava un pò di buona volontà ed una ricerca con Google):

 

 

 

if you encounter the “WiFi: no hardware installed”-error after installing OSX 10.8, do this :

- go to [your hard disk] –> System –> Library –> Extentions –> IO80211Family.kext

- CTRL-click on the IO80211Family.kext and select “Show Package Contents” from the pulldown menu

- then go to Contents –> Info.plist and drag the Info.plist to the Desktop

- CTRL-click on the Info.plist (the one on the Desktop) and select “Open with –> TextEdit” from the pulldown menu

- then, inside the Info.plist file, find and delete these line (found near the end) :

<key>OSBundleRequired</key>

<string>Network-Root</string>

- then select File –> Save to save the edited version of the Info.plist on your Desktop

- then, drag the Info.plist from the Desktop back onto the original version that is in System –> Library –> Extentions –> IO80211Family.kext –> Contents

- in the warning window that pops up, click on “Authenticate” and type your administrator login and password

…that should be it !

now your AR9280 should be recognized by OSX 10.8 “Mountain Lion”, and the “WiFi: no hardware installed”-error should be gone

Ti ringrazio ma ho trovato il kext. Scusa ma io cerco direttamente i kext quindi non ho mai trovato questa guida =)

Ora restano i problemi dell'ethernet e della scheda grafica..

Ethernet: Intel® 82577LC Gigabit Network Connection

Scheda grafica: Intel® HD Graphics

Link to comment
Share on other sites

  • 3 months later...
 Share

×
×
  • Create New...