mediamac Posted September 12, 2012 Share Posted September 12, 2012 Hi, My installation is 10.6.8 and works perfectly on all aspects by using cpus=1.But little bit slow just a slight change only.So what are all the disadvantages when we use CPUS=1.Will it be slow when doing multitasking ? Thanks Link to comment Share on other sites More sharing options...
cili0 Posted September 12, 2012 Share Posted September 12, 2012 CPUS=1 means that you're forcing the system to use only one core out of all the cores your processor is provided. So yes, the system will be slower if compared to what your processor could actually do. Link to comment Share on other sites More sharing options...
mediamac Posted September 12, 2012 Author Share Posted September 12, 2012 CPUS=1 means that you're forcing the system to use only one core out of all the cores your processor is provided. So yes, the system will be slower if compared to what your processor could actually do. I see so obviously if i use final cut it will lag or terribly slow. Link to comment Share on other sites More sharing options...
verdant Posted September 12, 2012 Share Posted September 12, 2012 @ mediamac You can try booting with all cores together with the bootflag maxmem=2048 or 3072 or 3456. Also see my nForce OS X Snow Leopard install guide on which AppleNForceATA.kext to try/use....... Link to comment Share on other sites More sharing options...
mediamac Posted September 12, 2012 Author Share Posted September 12, 2012 @ mediamac You can try booting with all cores together with the bootflag maxmem=2048 or 3072 or 3456. Also see my nForce OS X Snow Leopard install guide on which AppleNForceATA.kext to try/use....... Thats right but when you use maxmem=2048 will it not suppress the RAM ? just for clarification Link to comment Share on other sites More sharing options...
verdant Posted September 12, 2012 Share Posted September 12, 2012 @ mediamac Booting with maxmem=2048 restricts OS X to using only 2GB RAM of the RAM you have installed, while maxmem=3072 restricts OS X to using only 3GB RAM of the RAM you have installed, and so on, but it will enable you to use all CPU cores with multi-thread/core-aware software. You could also boot with cpus=1 maxmem=2048 at the Chameleon boot: prompt when you want to do any heavy Firewire//USB/SATA/PATA data transfers........then after the data transfer is complete, you can reboot as normal with 4 cores to do the CPU-intensive audio/video work on the transferred audio/video data files........this approach used to work for me when using OS X Leopard..... Link to comment Share on other sites More sharing options...
mediamac Posted September 12, 2012 Author Share Posted September 12, 2012 So is there any kext (applenforce.kext like ) replacement which solves this issue of restriciting because if i install 8GB ram then 70% will be wasted and likewise for 6 core cpu. Thanks again Link to comment Share on other sites More sharing options...
verdant Posted September 12, 2012 Share Posted September 12, 2012 @ mediamac It is all explained in my nForce OS X Lion and OS X Snow Leopard guides, where you can also download both the AppleNForceATA.kext by slashack and AnV's variant of it for 32bit booting, and also imk's derivative of it for 64bit booting of OS X Lion and OS X Mountain Lion.....these kexts overcome the 3GB RAM limit of MeDevil's original AppleNForceATA.kext..... I am running 6GB RAM on my nForce 650i with 4 cores using imk's AppleNForceATA.kext on OS X Snow Leopard, OS X Lion, and OS X Mountain Lion in 64bit mode, and AnV's variant of slashack's AppleNForceATA.kext on OS X Snow Leopard in 32bit mode....... Link to comment Share on other sites More sharing options...
mediamac Posted September 13, 2012 Author Share Posted September 13, 2012 Ok i will refer you guide there.Thanks a lot. Link to comment Share on other sites More sharing options...
Recommended Posts