3 replies to this topic

[Traue]

Hello guys. I've been reading your forums for several monts, but i decided to sign up and create discussion just now. This is also my first experience in Hackintosh installing. I chose iDeneb v1.3 - 10.5.5 Leopard OSx86. I'm out of Moscow now and last time i was think about purchase of MacBook Air, first of all i decided to try MacOS live and install Leopard on the old AMD-System, lying in the corner for years. There is also laptop under AMD. There are a lot of useful infromation, so i don't want to do something with it.

Configuration of my PC:

CPU: QuadCore AMD Athlon II X4 620, 2600 MHz;
System board: ASRock N68-S;
Chipset: nVIDIA nForce 7025-630a, AMD K10;
RAM: 4 Gb (DDR 2);
BIOS Type: AMI;

And only new component of my PC,
GPU: NVIDIA GeForce GTX 560.

Other "useful" information of my computer (AIDA-64 Report):

Spoiler

--------[ AIDA64 Extreme Edition ]--------------------------------------------------------------------------------------
Version AIDA64 v1.20.1150
Benchmark Module 2.6.328-x32
Homepage http://www.aida64.com/
Report Type Report Wizard
Computer ****
Generator ****
Operating System Microsoft Windows 7 Home Basic 6.1.7601
Date 2012-07-15
Time 14:37

--------[ Summary ]-----------------------------------------------------------------------------------------------------
Computer:
Computer Type ACPI under x86
Operating System Microsoft Windows 7 Home Basic
OS Service Pack Service Pack 1
Internet Explorer 9.0.8112.16421
DirectX DirectX 11.0
Computer Name ****
User Name ****
Logon Domain ****
Date / Time 2012-07-15 / 14:37
Motherboard:
CPU Type QuadCore AMD Athlon II X4 620, 2600 MHz (13 x 200)
Motherboard Name ASRock N68-S (2 PCI, 1 PCI-E x1, 1 PCI-E x16, 2 DDR2 DIMM, Audio, Video, LAN)
Motherboard Chipset nVIDIA nForce 7025-630a, AMD K10
System Memory 3712 MB (DDR2-800 DDR2 SDRAM)
DIMM1: Apacer 78.A1GA0.9LZ 2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
DIMM2: Apacer 78.A1GA0.9LZ 2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
BIOS Type AMI (10/08/09)
Communication Port Ïîñëåäîâàòåëüíûé Ïîðò (COM1)
Communication Port ECP-Ïîðò Ïðèíòåðà (LPT1)
Display:
Video Adapter NVIDIA GeForce GTX 560 (1048256 KB)
Video Adapter NVIDIA GeForce GTX 560 (1048256 KB)
Monitor Óíèâåðñàëüíûé ìîíèòîð PnP [NoDB] (HMFS703733)
Multimedia:
Audio Adapter VIA VT1705 @ nVIDIA nForce 7025-630a (MCP68SE) - High Definition Audio Controller
Audio Adapter Êîíòðîëëåð High Definition Audio (Microsoft) [10DE-0E0C] [NoDB]
Storage:
IDE Controller ñòàíäàðòíûé äâÓõÊàíàëüíûé Êîíòðîëëåð PCI IDE
Storage Controller AO8OSTVK IDE Controller
Storage Controller Êîíòðîëëåð NVIDIA nForce Serial ATA
Storage Controller Êîíòðîëëåð NVIDIA nForce Serial ATA
Disk Drive WDC WD50 00AAKS-00V1A SCSI Disk Device (465 GB)
Optical Drive ATAPI DVD A DH24AAS SCSI CdRom Device
Optical Drive GFEVY O52ZGTQJS SCSI CdRom Device
SMART Hard Disks Status OK
Partitions:
C: (NTFS) 390.0 GB (205.5 GB free)
Z: (NTFS) 390.0 GB (205.5 GB free)
Total Size 780.0 GB (411.0 GB free)
Input:
Keyboard ÊëàâèàòÓðà HID
Keyboard ÊëàâèàòÓðà HID
Keyboard ñòàíäàðòíàÿ ÊëàâèàòÓðà PS/2
Mouse HID-ñîâìåñòèìàÿ ìûøü
Mouse Microsoft PS/2 Port Mouse (IntelliPoint)
Network:
Primary IP Address 192.168.1.4
Primary MAC Address 00-19-66-FE-DB-C8
Network Adapter ñåòåâîé Êîíòðîëëåð NVIDIA nForce (192.168.1.4)
Peripherals:
Printer Fax
Printer HP Deskjet 5900 Series
Printer Microsoft XPS Document Writer
Printer îòÏðàâèòü â OneNote 2007
USB1 Controller nVIDIA nForce 7025-630a (MCP68SE) - OHCI USB 1.1 Controller
USB2 Controller nVIDIA nForce 7025-630a (MCP68SE) - EHCI USB 2.0 Controller
USB Device Microsoft LifeChat LX-3000
USB Device USB-Óñòðîéñòâî ââîäà
USB Device USB-Óñòðîéñòâî ââîäà
USB Device USB-Óñòðîéñòâî ââîäà
USB Device USB-Óñòðîéñòâî ââîäà
USB Device USB-Óñòðîéñòâî ââîäà
USB Device ñîñòàâíîå USB Óñòðîéñòâî
USB Device ñîñòàâíîå USB Óñòðîéñòâî
USB Device ñîñòàâíîå USB Óñòðîéñòâî
DMI:
DMI BIOS Vendor American Megatrends Inc.
DMI BIOS Version L1.60
DMI System Manufacturer DEPO Computers
DMI System Product To Be Filled By O.E.M.
DMI System Version To Be Filled By O.E.M.
DMI System Serial Number 251179-085
DMI System UUID 00020003-00040005-00060007-00080009
DMI Motherboard Manufacturer ASRock
DMI Motherboard Product N68-S
DMI Motherboard Version
DMI Motherboard Serial Number
DMI Chassis Manufacturer To Be Filled By O.E.M.
DMI Chassis Version To Be Filled By O.E.M.
DMI Chassis Serial Number To Be Filled By O.E.M.
DMI Chassis Asset Tag To Be Filled By O.E.M.
DMI Chassis Type Desktop Case
DMI Total / Free Memory Sockets 2 / 0

The names of actual companies and products mentioned herein may be the trademarks of their respective owners.

I have not experienced any problems with the disc. I choose formated under HFS+ 79 Gb disk installing MacOS. But i experienced several problems with "Custom" bar before installation. I've tried various combinations and re-installed Leopard 8-9 times. The last few times I have picked X11, all utilites and russian localization, custom additional fonts, AMD-patch, all NVidia pathes and all Kernel. Every time installation successful complete and system try to reboot, but then - after reboot - system loads for 2-3 minutes and hangs on "Apple" (Screenshot below).

Launch system with "-v" show me error with "USBF" (Screenshot bellow). I don't understand what it means. I try to disable all USB-devices, but my keyboard and mouse use it. Last time i launched installing there is also my HP Printer.

Screenshot:

Spoiler

Thanks in advanced. You, guys, my last hope.

Best regards, Alexei.

Moscow, Russia.

[Traue]

Hey, guys, really no ideas? Anybody, please help

But this message i decided to post for another reason. I tried to launch Boot DVD with -s (Single User) parameter. So i have this several errors before installation process was began (First screen under spoiler bellow), then i use quit-command and get a little bit more errors before installtion was began (2-nd screen under spoiler). Chose NVidia sound patch and get successful reload, then more one and second, and third. This was not normal, but this time system ask me to do it (Screen bellow), i think that USBF-errors are not critical, but nVidia chipset cause this one.

Screenshots:
1-st screen:

Spoiler

2-nd screen:

Spoiler

Last one:

Spoiler

Trying to solve this problem myself, i found this page - _http://tgrounds.blogspot.com/2008/10/how-to-patch-ideneb-iso-file-in-windows.html , but i can't found any patch on the same theme. Could you help me guys please? Or could you get me another ideas? Thanks in advance!

[verdant]

Hi there,

With your USB problem, the BIOS is probably preventing OS X taking control of the USB ports, using the Chameleon bootloader, try as boot flags:


"-v EHCIacquire=Yes cpus=1 maxmem=2048"

Your audio chipset is VIA VT1705, so you need to find a driver kext for it.........search Google using VIA VT1705 OS X

For more help with your AMD nForce nForce 7025-630a (MCP68SE) chipset setup, try searching Google using OS X Asus M2N68-AM SE2

[r3boRN]

The last few times I have picked X11, all utilites and russian localization, custom additional fonts, AMD-patch, all NVidia pathes and all Kernel. Every time installation successful complete and system try to reboot, but then - after reboot - system loads for 2-3 minutes and hangs on "Apple" (Screenshot below).

I think at least part of your problem may be that you are trying to install all of the kernels. I'm pretty new to hackintosh scene as well but I would recommend starting with voodoo kernel (I assume that's on iDeneb1.3?). I don't really know what all is on 1.3, because I'm using 1.6 myself. Vanilla isn't going to work because you are on an AMD processor. Someone who's been around longer feel free to correct that if it's wrong.