Jump to content

10.7.4 is OUT !

10.7.4

  • Please log in to reply
157 replies to this topic

#121
sonic the hedgehog

sonic the hedgehog

    InsanelyMac Protégé

  • Members
  • Pip
  • 4 posts
Initially I had KPs with my Acer X3810. I then experimented with removing VoodooHDA kext and then installing updates followed by reinstalling VoodooHDA kext. Worked like a dream :)

#122
bertmannaustria

bertmannaustria

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 211 posts
  • Gender:Male
  • Location:Vienna, Austria
GA-EX58-UD4P -> works fine B)

Attached Files

  • Attached File  fine.png   156.79KB   105 downloads


#123
OsXsO

OsXsO

    InsanelyMac Protégé

  • Members
  • PipPip
  • 84 posts
  • Location:Spain

PROBLEM:
I have no CMOS reset problem but WAKEUP (after sleep) didnt work anymore .
C2D sleeps = OK , but instead of wake up it reboots the PC.
I never had this problem for years (perhaps in 10.5 time last) and use the AppleRTC patched (also an other 10.7.3 patched which worked well)
What other system kexts can be the problem (because i dont think AppleRTC an be the prob - RTC from 10.7.3 also has same problem in 10.7.4 system)


long time ago .. usb

#124
whityini

whityini

    InsanelyMac Geek

  • Members
  • PipPipPipPip
  • 184 posts
  • Gender:Male
  • Location:Italia
I updated from 10.7.2 to 10.7.4 using Combo update and so far everything going pretty smooth accept for my WiFi card. The kext I was using in 10.7.2 does not work in 10.7.4 for the Dell 1510 Mini-Card I have installed to replace the original installed into my Qosmio X500. I just get "no WIFI Hardware Installed" when I point the mouse over the Wireless icon on the top of screen.
Anyone has the same issue?
Any help will be welcome.
Thanks

#125
Phil511

Phil511

    InsanelyMac Protégé

  • Members
  • PipPip
  • 70 posts
  • Gender:Male
  • Location:USA

Hello, hackintosh noob here.

Just updated my hackintosh laptop (XPS M1530) running Lion 10.7.3 to 10.7.4. Unfortunately, it encountered a [PCI configuration begin] hang. I suspect that my Graphic Card is causing the problem. It's a 8600M GT.

Tried various boot flags, notably npci=0x2000, but so far no headway. Any advice from you guys?


Try npci=0x3000. Good luck and I hope it works for you.

#126
mnfesq

mnfesq

    Emenef, Esquire

  • Members
  • PipPipPipPipPipPipPip
  • 546 posts
  • Gender:Male
  • Location:Southern California

I updated from 10.7.2 to 10.7.4 using Combo update and so far everything going pretty smooth accept for my WiFi card. The kext I was using in 10.7.2 does not work in 10.7.4 for the Dell 1510 Mini-Card I have installed to replace the original installed into my Qosmio X500. I just get "no WIFI Hardware Installed" when I point the mouse over the Wireless icon on the top of screen.
Anyone has the same issue?
Any help will be welcome.
Thanks


I have the same card. I made a modified IO80211Family.kext. Try it out and see if it works for you.

Attached File  IO80211Family.kext.zip   5.46MB   18 downloads

#127
sld87

sld87

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts
Cant for the life of me get my kexts in order and copious amounts of deleting have left me with a system with terrible GFX performance out of my
Gigabyte GA-Z68X-UD5-B3 and Nvidia 560ti 1024.


My question is could someone tell me with Nvidia and Geforce kexts I should have in my S/L/E folder as I needed to delete a few just to get it to boot as with them in there, the system would have a funky graphics issue on continuous loop at the login screen.

I can post exactly what I deleted a little bit later if it will help. But if someone would kindly upload the new graphics as a base for editing on the new update (As I think I have replaced them) that would be awesome!

#128
RobertX

RobertX

    Yosemite Sam

  • Members
  • PipPipPipPipPipPipPip
  • 572 posts
  • Gender:Not Telling
here's a link to the retail drivers from nvidia... :whistle: http://www.nvidia.co...f06-driver.html (10.7.4)

#129
sld87

sld87

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts

here's a link to the retail drivers from nvidia... :whistle: http://www.nvidia.co...f06-driver.html (10.7.4)


Thanks, I have those but when I got to install it says it won't run on my system?

Which kexts am I likely missing? Also I still need to put the updated AppleGraphicsPowerManagement.kext in there if anyone has an updated one.

Attached Files



#130
magnifico

magnifico

    Retired

  • Donators
  • 2,559 posts
  • Gender:Male

Thanks, I have those but when I got to install it says it won't run on my system?

Which kexts am I likely missing? Also I still need to put the updated AppleGraphicsPowerManagement.kext in there if anyone has an updated one.


Which smbios you use?

#131
sld87

sld87

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts

Which smbios you use?


Cracked it!!! I just hit 'Show Package Contents' and went to the payload pkg and ran that =) Now everything flawless again!!!

I

#132
magnifico

magnifico

    Retired

  • Donators
  • 2,559 posts
  • Gender:Male

Cracked it!!! I just hit 'Show Package Contents' and went to the payload pkg and ran that =) Now everything flawless again!!!

I


So?
You have resolve?

#133
sld87

sld87

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts

So?
You have resolve?


Yep everything back working 100%. Thanks for offering to help though :)

#134
magnifico

magnifico

    Retired

  • Donators
  • 2,559 posts
  • Gender:Male

Yep everything back working 100%. Thanks for offering to help though :)


Sorry , listen me please...but because you use nvidia driver and not grafic enabler in bootplist?

#135
k00lrav

k00lrav

    InsanelyMac Protégé

  • Members
  • Pip
  • 41 posts
i did the update and i lost ethernet , it shows i have no ethernet installed. my mobo is dg43gt with Intel Corporation 82567V-2 Gigabit for my ethernet. if anyone has any info please let me know. thank you.

#136
sld87

sld87

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts

Sorry , listen me please...but because you use nvidia driver and not grafic enabler in bootplist?


Poi parlare anche in Italiano.

I used both. This is what I did

1. My kexts were broken. I could not boot because it would get to the login screen (Verbose) and all the graphics would go crazy.
2. I deleted geforce.kext, nvidia etc etc etc leaving only Hal100, and geforce.bundle for my card
3. This allowed me to boot into my computer with 1024x768 resolution and minimal card performance.
4. I then used geforce5XX enabler installer for 10.7.2 (I actually have no idea if this did anything or not)
5. I then replaced NVHal100, geforce.bundle (Which was patched previously for my graphics card 560ti and fermi etc) and ApplePowerManagement
6. Rebooted, and my graphics card was coming up listed as a 440 GT with less than desirable performance.
7. Deleted Natit.kext, and extracted the installer from the above Nvidia link (As running it normally said it wasn't able to install)

Rebooted and voila. Resolution back, proper card and max performance with QE/Ci and fermi.

#137
JamesLittler

JamesLittler

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPipPip
  • 1,022 posts
  • Gender:Male
  • Location:Portsmouth, England

i did the update and i lost ethernet , it shows i have no ethernet installed. my mobo is dg43gt with Intel Corporation 82567V-2 Gigabit for my ethernet. if anyone has any info please let me know. thank you.


Restore IONetworkingFamily.kext from 10.7.3, see if that makes a difference.

#138
TH3L4UGH1NGM4N

TH3L4UGH1NGM4N

    (~_~)

  • Retired
  • 1,159 posts
  • Gender:Male
  • Location:Wonderland
  • Interests:(~_^)
Gigabyte GA-EP43-UD3L updated (I'm always lazy when it comes on to software updates)

Had to patch AppleHDA like usual and run a perl command to get my 6870 back into motion. I must say though, these updates just keep getting smoother and smoother..

#139
magnifico

magnifico

    Retired

  • Donators
  • 2,559 posts
  • Gender:Male

Poi parlare anche in Italiano.



:|

#140
sld87

sld87

    InsanelyMac Geek

  • Members
  • PipPipPip
  • 103 posts

:|

?
*Puoi





Also tagged with one or more of these keywords: 10.7.4


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy