Dimitree Posted March 9, 2012 Share Posted March 9, 2012 Hello I'm trying to install iDeneb 1.6 on my laptop: Acer Aspire 5536G CPU: DualCore AMD Athlon X2 QL-64 (supports: x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3) Chipset: AMD 780G/780V/790GX, AMD K11 GPU: ATI Mobility Radeon HD 4530/4570 Audio: Realtek ALC888/1200 @ ATI SB700 (and 1366x786 screen) Network: Atheros AR5009 802.11a/g/n Wireless Other: AHCI Sata controller, 1gB ram DDR2 I've read somewhere that some people managed to install iDeneb on this laptop, but the sound and the wireless are not working, but I don't mind now, since I have a usb wireless adapter that is working on Leopard, and a usb Soundcard for music..working too. this is what I've done so far: used Acronis Disk Director to create a partition for leopard, 100gB primary/active. The HD is now divided in 2 partitions: WIN7 (primary) and MAC (primary/active). Run the installer DVD, it load fine, then I used disk utility to initialize the MAC partition, as extended (journaled). Then I select only the things I may need: Italian language, 9.8.0 Voodoo based Kernel, ATI video drivers. It installs fine, but when finished, it reboots and it won't start. If I remove the dvd after installation, I get this screen at the boot: If I keep the dvd in, I get the setup procedure again. If I use a boot cd (Darwin/x86 boot v5.0.132 - chameleon v2.0-RC5 r650), and boot Verbose, I get this: If I use another boot cd, I get almost the same message. If I use iDeneb v1.1 (10.5.7), I get the same results. What could I try? many thanks Link to comment Share on other sites More sharing options...
Dimitree Posted March 15, 2012 Author Share Posted March 15, 2012 anyone? Link to comment Share on other sites More sharing options...
Recommended Posts