Jump to content

Internal SATA HDDs not showing up in ML


  • Please log in to reply
7 replies to this topic

#1
coder_cotton

coder_cotton

    InsanelyMac Protégé

  • Members
  • Pip
  • 3 posts
Hello all,

I upgraded my Lion install to ML, everything is fine EXCEPT my other internal SATA drives are no longer showing up. I installed IOAHCIBlockStorageInjector kext, but still no luck. I have 4 drives, 2 don't show up in ML:

80GB Intel SSD - ML boot - shows up
120GB OCZ SSD - Windows - shows up
1TB SATA HDD - HFS storage - DOESN'T SHOW UP IN ML
500GB SATA HDD - CCC'd 10.7 install (boots fine) - DOESN'T SHOW UP IN ML

The drives don't even show up in Disk Utility or diskutil via the command line. I've never had an issue with non-boot drives showing up on this hardware build since 10.5, so I'm not sure what is going on.

I can boot into my CCC cloned disk on the 500GB drive, my old 10.7 Lion install, and see drives just fine.

Any ideas? Thanks!

Cotton

#2
witt3r3uzz

witt3r3uzz

    InsanelyMac Protégé

  • Members
  • Pip
  • 13 posts
Got the same problem

Only my Drive 1 SSD 120gb is recognized (3 partitions part 1 Lion, part 2 Mountain Lion, part 3 Windows 8)

Drive 2 WD 2tb not recognized
Drive 3 WD 2tb not recognized
Drive 4 Samsung 1tb not recognized
Drive 5 Samsung 1tb not recognized

couldn't get the others to be recognized

#3
LatinMcG

LatinMcG

    Insanely digesting DSDT

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 2,509 posts
  • Gender:Male
  • Location:Tampa, Florida
the ahci from ML seems more picky.. have to use older files from lion

also in your sig
1 has problems no USB after wake from sleep

try disabling USB3 in bios

and in dsdt editor try the ahci orange icon fix. it injects device id 2681 ESB2

#4
Riley Freeman

Riley Freeman

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPip
  • 847 posts
  • Gender:Male
  • Location:The Streets
No problems here. Intel ICH8 for both internal disks and JMicron 363 for the hot-swap bay and eSATA. I'm using the vanilla kexts and the ESB2 SATA fix in DSDT, no patched or old Lion kexts.

I clean-installed ML but previously I upgraded SL to Lion with this same set-up and everything kept working. If you're using any modded kexts try removing them and use a DSDT patch instead.

#5
kdtt

kdtt

    InsanelyMac Protégé

  • Members
  • PipPip
  • 76 posts
They say wd's sata disks has function called puis which is disabled by default.
You can enable that function by jumper setting or by software. but unless bios supports that function,
system can't recognize those disks because disk is not spinning.
I don't know whether this problem is related to this or not
but I guess ML somehow enables that function .I'm not sure though.

#6
manor

manor

    InsanelyMac Sage

  • Members
  • PipPipPipPipPip
  • 311 posts
  • Gender:Male

Hello all,

I upgraded my Lion install to ML, everything is fine EXCEPT my other internal SATA drives are no longer showing up. I installed IOAHCIBlockStorageInjector kext, but still no luck. I have 4 drives, 2 don't show up in ML:

80GB Intel SSD - ML boot - shows up
120GB OCZ SSD - Windows - shows up
1TB SATA HDD - HFS storage - DOESN'T SHOW UP IN ML
500GB SATA HDD - CCC'd 10.7 install (boots fine) - DOESN'T SHOW UP IN ML

The drives don't even show up in Disk Utility or diskutil via the command line. I've never had an issue with non-boot drives showing up on this hardware build since 10.5, so I'm not sure what is going on.

I can boot into my CCC cloned disk on the 500GB drive, my old 10.7 Lion install, and see drives just fine.

Any ideas? Thanks!

Cotton

use platformuuid.kext add your uuid installed.after restat worked.

#7
LatinMcG

LatinMcG

    Insanely digesting DSDT

  • Members
  • PipPipPipPipPipPipPipPipPipPipPip
  • 2,509 posts
  • Gender:Male
  • Location:Tampa, Florida

use platformuuid.kext add your uuid installed.after restat worked.

now that u mention uuid.. ive seen uuid methods in dsdt lately. if { } else return..
wonder if thats related.

#8
jihu

jihu

    InsanelyMac Protégé

  • Members
  • Pip
  • 21 posts
Switching bootloader to Chimera 1.8 seems to fix my problem with 1.5TB & 2.0TB drives.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy