Jump to content

[Help] Post-Install on GA-X58A-UD3R Rev 2 FF


Unoquadium
 Share

2 posts in this topic

Recommended Posts

Alright so I finished installing Lion on my computer using this guide up to [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], which I did not run.

 

Instead of [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] I installed MyHack (Chameleon + Extra) and applied the graphics mode fix found here for a successful bootloader install and no safe mode needed.

I also inserted GraphicsEnabler=No into the boot flags so it would boot. It does not boot without that.

After rebooting I installed this Realtek LAN driver and Voodoo HDA for sound and network. Works so far.

 

I installed no DSDT files.

 

I have 2 obstacles left on my road to OSX86 stablilty:

- I have a PS/2 keyboard

- Graphics

 

I tried installing kexts for PS/2 support but none of them worked. If anyone got this working and can provide a guide, that would be nice.

 

As for graphics, I have one XFX Radeon HD 6770 and one Sapphire Radeon HD 5770 crossfired together, the 6770 is connected to 3 monitors (one by HDMI, one by DVI, and one by DisplayPort) and the 5770 has nothing connected to it. I want to get all 3 monitors working and I'm willing to flash the graphics cards' bios if needed. I need a step by step guide on how to get this working since I don't have much experience with kext injections and the such.

 

Thanks!

Link to comment
Share on other sites

 Share

×
×
  • Create New...