RomanTPA Posted November 21, 2011 Share Posted November 21, 2011 Random crashes (even at idle) and system crashes every time I watch youtube. M/B: G31M-ES2L-FH VIDEO: EN8400GS 512MB ProductName : Mac OS X ProductVersion: 10.6.8 BuildVersion: 10K549 Bootargs : boot-uuid=91DFD360-E198-3F28-BF99-95A5437EB597 rd=*uuid arch=i386 maxmem=4096 Kernel : Darwin Kernel Version 10.8.0: Thu May 12 16:42:42 PDT 2011 Model ID : MacPro3,1 KernelMode: i386 CPU TYPE : Intel® Core2 Quad CPU Q9550 @ 2.83GHz Core : 2833MHz Bus: 333MHz FSB: 1332MHz CPU ID : Ox10676 (67190) Cache L2: 6Mb RAM : 4096Mb HibernateMode: 0 SwapUsage : total = 64.00M used = 0.00M free = 64.00M User : admin on admins-Mac-Pro.local Start working: 2011-11-21 11:10:49 -0500 Detected ... MAC OS X "Snow Leopard". Link to comment Share on other sites More sharing options...
LatinMcG Posted November 21, 2011 Share Posted November 21, 2011 u need AppleHDADisabler.kext look under kernel extensions in backtrace. shows voodoohda 2.1 old. u in tampa ? i have same board. is it rev 1.x or 2.x ? Link to comment Share on other sites More sharing options...
RomanTPA Posted November 21, 2011 Author Share Posted November 21, 2011 REV 2.0 yes, in Tampa. Just installed AppleHDADisabler.kext, will see how it works now. Link to comment Share on other sites More sharing options...
LatinMcG Posted November 21, 2011 Share Posted November 21, 2011 ahhh its atheros lan and different alc audio chipset. might want to use vodoohda 2.7.2 or 2.7.3 im local to you coool ( if u need in person help im available) Link to comment Share on other sites More sharing options...
RomanTPA Posted November 21, 2011 Author Share Posted November 21, 2011 ahhh its atheros lan and different alc audio chipset. might want to use vodoohda 2.7.2 or 2.7.3 im local to you coool ( if u need in person help im available) My networking don't work unless I boot from bootloader. Everything else works just like a Mac. Been trying to figure that out for a week now :/ Thanks for quick reply. Link to comment Share on other sites More sharing options...
LatinMcG Posted November 21, 2011 Share Posted November 21, 2011 My networking don't work unless I boot from bootloader. Everything else works just like a Mac. Been trying to figure that out for a week now :/ Thanks for quick reply. u need smbios.plist revised probably missing some info in it get macpro31 extra folder here http://www.insanelymac.com/forum/index.php...t=0&start=0 u have dsdt in use ? (im by waters n dalemabry) Link to comment Share on other sites More sharing options...
RomanTPA Posted November 21, 2011 Author Share Posted November 21, 2011 u need smbios.plist revised probably missing some info in itget macpro31 extra folder here http://www.insanelymac.com/forum/index.php...t=0&start=0 u have dsdt in use ? (im by waters n dalemabry) no DSDT. What company do you work for? Link to comment Share on other sites More sharing options...
LatinMcG Posted November 21, 2011 Share Posted November 21, 2011 none. i worked for a few (dell <stream> ,ibm, brighthouse.. but im independent pc tech. (a few pc shops know me around here.. tampa bay laptops, computer junkyard and a few other smaller ones) get dsdt editor and extract dsdt and zip it. post it here Link to comment Share on other sites More sharing options...
RomanTPA Posted November 21, 2011 Author Share Posted November 21, 2011 get dsdt editor and extract dsdt and zip it. post it here I honestly have no clue what this means. Link to comment Share on other sites More sharing options...
LatinMcG Posted November 21, 2011 Share Posted November 21, 2011 I honestly have no clue what this means. http://www.insanelymac.com/forum/index.php...t=0&start=0 Link to comment Share on other sites More sharing options...
RomanTPA Posted November 21, 2011 Author Share Posted November 21, 2011 http://www.insanelymac.com/forum/index.php...t=0&start=0 DSDT.zip Here it is. Link to comment Share on other sites More sharing options...
LatinMcG Posted November 21, 2011 Share Posted November 21, 2011 i believe a few problem: _PTS, and bios settings of power management S3 enabled is good. not s1 Name (\SS1, Package (0x04) { 0x01, 0x00, 0x00, 0x00 }) Method (\_PTS, 1, NotSerialized) { Or (Arg0, 0xF0, Local0) Store (Local0, DBG1) OSTP () If (LEqual (Arg0, 0x01)) {} If (LEqual (Arg0, 0x03)) {} If (LEqual (Arg0, 0x05)) { Store (ESMI, Local0) And (Local0, 0xFB, Local0) Store (Local0, ESMI) Store (0x99, SMIP) } If (LEqual (Arg0, 0x04)) { If (LNot (PICF)) { Sleep (0x64) } } } needs OperationRegion (PMRS, SystemIO, 0x0430, 0x1) Field (PMRS, ByteAcc, NoLock, Preserve) { , 4, SLPE, 1 } Method (\_PTS, 1, NotSerialized) { Or (Arg0, 0xF0, Local0) Store (Local0, DBG1) OSTP () If (LEqual (Arg0, 0x01)) {} If (LEqual (Arg0, 0x03)) {} If (LEqual (Arg0, 0x05)) { Store (ESMI, Local0) And (Local0, 0xFB, Local0) Store (Local0, ESMI) Store (0x99, SMIP) Store (Zero, SLPE) Sleep(0x10) } If (LEqual (Arg0, 0x04)) { If (LNot (PICF)) { Sleep (0x64) } } } ill fix it up and post it later tonight. Link to comment Share on other sites More sharing options...
RomanTPA Posted November 21, 2011 Author Share Posted November 21, 2011 Cool, thanks. BTW, after installing AppleHDADisabler.kext, it took 5 hours of playing youtube, VLC, Safari, Chrome, Mail before it crashed. Before, it would crash in <5min EDIT: If this helps, here are steps performed by me. G31M-ES2L-FH and EN8400GS and 4GB DDR2-800 Only 4GB RAM during installation, 1 monitor, 1 HDD during installation. Boot PC from Boot loader CD, Run OSX install DMG or CD. Format HDD to GUID scheme, then run installation. Hit "Customize" when selecting HDD, install minimal (for fast install). Forced reboot, leave boot loader CD in. Run 10.6.8 combo update (DO NOT REBOOT) Run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] - [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] install (REBOOT NOW w/CD) Repair permission. Install NVIDIA retail Drivers (Reboot w/o CD) OSX86Tools - Enable Qartz GL (Reboot w/o CD) Install NVEnabler64.kext and AppleHDADisabler (Reboot w/o CD) Link to comment Share on other sites More sharing options...
LatinMcG Posted November 22, 2011 Share Posted November 22, 2011 lol u got new and old stuff in them steps Install NVIDIA retail Drivers (worthless for the 8400 as the 10.6.8 are ok) OSX86Tools - Enable Quartz GL Install NVEnabler64.kext the 10.6.8 [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] step are unneeded. im almost done with dsdt.aml and by the way u need atheros attansic L1 or L2 lan driver likely. i believe last step [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] before restart changes the applehda (rollback) not needed as u using voodoohda what device id is your 8400gs 04xx or 10c3 ? (xx being numbers i forgot) Link to comment Share on other sites More sharing options...
RomanTPA Posted November 22, 2011 Author Share Posted November 22, 2011 what device id is your 8400gs 04xx or 10c3 ? (xx being numbers i forgot) Chipset Model: Unknown nVidia card Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: NVIDIA (0x10de) Device ID: 0x10c3 Revision ID: 0x00a2 Displays: L1916HW: Resolution: 1680 x 1050 @ 60 Hz Pixel Depth: 32-Bit Color (ARGB8888) Display Serial Number: 0 Main Display: Yes Mirror: Off Online: Yes Rotation: Supported V193W: Resolution: 1440 x 900 @ 75 Hz Pixel Depth: 32-Bit Color (ARGB8888) Display Serial Number: LBP0C0164003 Mirror: Off Online: Yes Rotation: Supported lol u got new and old stuff in them steps Install NVIDIA retail Drivers (worthless for the 8400 as the 10.6.8 are ok) OSX86Tools - Enable Quartz GL Install NVEnabler64.kext the 10.6.8 [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] step are unneeded. im almost done with dsdt.aml and by the way u need atheros attansic L1 or L2 lan driver likely. i believe last step [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] before restart changes the applehda (rollback) not needed as u using voodoohda I tried to install OSX 5-6 times (different ways) with this set up, and that is the only way i could do it and have full resolution. If you could correct my steps, It would be great. atheros attansic is listed as my NIC in OSx86tools Link to comment Share on other sites More sharing options...
LatinMcG Posted November 23, 2011 Share Posted November 23, 2011 that video isnt 100% properly supported. but works with info.plist adding. id recomend a 9500gt at least or 9800gt the likely way to fix it is with GraphicsEnabler=Yes .. but older chameleon didnt have that device id added. i have a friend that has the g41m-es2L with 9500 gt and he dont care for osx .. he might trade video card with 20$. dsdt is prety much done. just looking over it comparing it to mine as theyre almost same btw osx86tools is way obsolete and had a few bugs. (where did u find steps to use it ? likely from 2009) Link to comment Share on other sites More sharing options...
Gringo Vermelho Posted November 23, 2011 Share Posted November 23, 2011 OSX86Tools - Enable Quartz GL the 10.6.8 [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] step are unneeded. So is "enabling Quartz GL" with OSX86Tools. Quartz GL is already enabled for software that is coded to use it. There is no benefit to enabling it for everything. Link to comment Share on other sites More sharing options...
RomanTPA Posted November 23, 2011 Author Share Posted November 23, 2011 that video isnt 100% properly supported. but works with info.plist adding. id recomend a 9500gt at least or 9800gt the likely way to fix it is with GraphicsEnabler=Yes .. but older chameleon didnt have that device id added. i have a friend that has the g41m-es2L with 9500 gt and he dont care for osx .. he might trade video card with 20$. dsdt is prety much done. just looking over it comparing it to mine as theyre almost same btw osx86tools is way obsolete and had a few bugs. (where did u find steps to use it ? likely from 2009) I have 9800GT at home, but I cannot get dual monitors to work. btw osx86tools is way obsolete and had a few bugs. (where did u find steps to use it ? likely from 2009) Im not even sure, I read 20+ write ups and just put 2 systems together. This one with 8400GS that keeps crashing and one at home with 9800GT that can only do 1 monitor and has ridiculously quiet volume level. Link to comment Share on other sites More sharing options...
LatinMcG Posted November 23, 2011 Share Posted November 23, 2011 chameleon2.1 latest with GraphicsEnabler usualy works what is 2nd monitor.? tv or lcd ? heres DSDT . its almost same as mine. put in /Extra/ RomanFinalDSDT.aml.zip Link to comment Share on other sites More sharing options...
LatinMcG Posted November 27, 2011 Share Posted November 27, 2011 u around.. or did u get pepper sprayed at walmart ? 1 Link to comment Share on other sites More sharing options...
RomanTPA Posted November 28, 2011 Author Share Posted November 28, 2011 u around.. or did u get pepper sprayed at walmart ? That made me laugh so hard. Sorry, I was sick and away from computer. I will update you monday when I get back to it. Thank you BTW, both monitors are LCD 19" Link to comment Share on other sites More sharing options...
RomanTPA Posted November 28, 2011 Author Share Posted November 28, 2011 and by the way u need atheros attansic L1 or L2 lan driver likely. u need smbios.plist revised probably missing some info in it I replaced the smbios.plist, but still no networking unless i boot from CD. I found atheros attansic L1 and L2 lan driver. but no luck with networking yet again. Link to comment Share on other sites More sharing options...
RomanTPA Posted November 28, 2011 Author Share Posted November 28, 2011 chameleon2.1 latest with GraphicsEnabler usualy works what is 2nd monitor.? tv or lcd ? heres DSDT . its almost same as mine. put in /Extra/ Installed DSDT 4 hours ago, so far all good. Thank you very much for your time. Link to comment Share on other sites More sharing options...
LatinMcG Posted November 28, 2011 Share Posted November 28, 2011 so the networking isnt working with new dsdt and attansic L1 ? lets see your ioregistry explorer ( save ioregistry and add to zip then post) http://www.mediafire.com/?mlzwnwmmjj4 Link to comment Share on other sites More sharing options...
RomanTPA Posted November 29, 2011 Author Share Posted November 29, 2011 so the networking isnt working with new dsdt and attansic L1 ? lets see your ioregistry explorer ( save ioregistry and add to zip then post) http://www.mediafire.com/?mlzwnwmmjj4 Will not let me attach the .zip Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, admin@www.insanelymac.com and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. Apache/2.2.15 (Scientific Linux) Server at www.insanelymac.com Port 80 Link to comment Share on other sites More sharing options...
Recommended Posts