Jump to content

No USB after sleep Lion z68xp-ud3 F8


Edkroket
 Share

18 posts in this topic

Recommended Posts

I have Z68XP-UD3 rev 1 mobo with bios f8 and have dsdt extracted in windows and edited to have it work. I have native SATA ports (no orange icons), sleep, native power management and so on.

My only problem is that USB is gone after sleep. In bios I disabled USB3 function.

If i replug USB it's just fine.

 

Here is my DSDT.aml DSDT-Z68XP-UD3-F8

If any one can take a look at it and even better fix it?

I would be very happy! :(

 

Ed

Link to comment
Share on other sites

I have Z68XP-UD3 rev 1 mobo with bios f8 and have dsdt extracted in windows and edited to have it work. I have native SATA ports (no orange icons), sleep, native power management and so on.

My only problem is that USB is gone after sleep. In bios I disabled USB3 function.

If i replug USB it's just fine.

 

Here is my DSDT.aml DSDT-Z68XP-UD3-F8

If any one can take a look at it and even better fix it?

I would be very happy! :)

 

Ed

 

Compile this one and replace.

Stil no go with usb HD/Flashcrads

 

RW

DSDT_edit_usb.zip

Link to comment
Share on other sites

Then something is wrong in your bios setting's. Ill post some pic's later on.

 

RW

 

Thanks again! I've changed some settings according to your pics. still the same!

Here are the my BIOS settings.post-365967-1320006090_thumb.jpgpost-365967-1320006104_thumb.jpgpost-365967-1320006110_thumb.jpgpost-365967-1320006120_thumb.jpgpost-365967-1320006127_thumb.jpgpost-365967-1320006135_thumb.jpgpost-365967-1320006142_thumb.jpg

 

What else could it be? It's the first time I'm in this kind of trouble.

I already have many different boards and I all managed them to sleep properly except this new board.

 

Ed

Link to comment
Share on other sites

Here is my Kernel log after sleep.

Oct 31 19:57:01 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2

Oct 31 19:57:01 localhost kernel[0]: Kernel is LP64

Oct 31 19:57:04 Mac-Pro-van-Ed kernel[0]: com_lnx2mac_RealtekRTL81xx: Ethernet address 50:e5:49:52:66:61

Oct 31 19:57:04 Mac-Pro-van-Ed kernel[0]: Previous Shutdown Cause: 3

Oct 31 19:57:04 Mac-Pro-van-Ed kernel[0]: NVDAGF100HAL loaded and registered.

Oct 31 19:57:06 Mac-Pro-van-Ed kernel[0]: DSMOS has arrived

Oct 31 19:57:06 Mac-Pro-van-Ed kernel[0]: macx_swapon SUCCESS

Oct 31 20:05:01 Mac-Pro-van-Ed kernel[0]:

Oct 31 20:05:13 Mac-Pro-van-Ed kernel[0]: Wake reason: HDEF EHC1

Oct 31 20:05:13 Mac-Pro-van-Ed kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.

Oct 31 20:05:15: --- last message repeated 1 time ---

Oct 31 20:05:15 Mac-Pro-van-Ed kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed

Oct 31 20:05:18 Mac-Pro-van-Ed kernel[0]: FireWire GUID ffffffffffffffff is invalid!

Oct 31 20:05:23: --- last message repeated 1 time ---

Oct 31 20:05:23 Mac-Pro-van-Ed kernel[0]: Graphics suppressed 10171 ms

Oct 31 20:05:27 Mac-Pro-van-Ed kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed

Oct 31 20:05:28: --- last message repeated 1 time ---

Oct 31 20:05:28 Mac-Pro-van-Ed kernel[0]: HID tickle 14266 ms

Oct 31 20:05:28 Mac-Pro-van-Ed kernel[0]: FireWire GUID ffffffffffffffff is invalid!

 

It seems that when I hit my keyboard it wakes with HDEF EHC1???? HDEF is Audio!

Also Firewire seems to have problem..

Any ideas?

 

Ed

Link to comment
Share on other sites

Here is my Kernel log after sleep.

Oct 31 19:57:01 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2

Oct 31 19:57:01 localhost kernel[0]: Kernel is LP64

Oct 31 19:57:04 Mac-Pro-van-Ed kernel[0]: com_lnx2mac_RealtekRTL81xx: Ethernet address 50:e5:49:52:66:61

Oct 31 19:57:04 Mac-Pro-van-Ed kernel[0]: Previous Shutdown Cause: 3

Oct 31 19:57:04 Mac-Pro-van-Ed kernel[0]: NVDAGF100HAL loaded and registered.

Oct 31 19:57:06 Mac-Pro-van-Ed kernel[0]: DSMOS has arrived

Oct 31 19:57:06 Mac-Pro-van-Ed kernel[0]: macx_swapon SUCCESS

Oct 31 20:05:01 Mac-Pro-van-Ed kernel[0]:

Oct 31 20:05:13 Mac-Pro-van-Ed kernel[0]: Wake reason: HDEF EHC1

Oct 31 20:05:13 Mac-Pro-van-Ed kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.

Oct 31 20:05:15: --- last message repeated 1 time ---

Oct 31 20:05:15 Mac-Pro-van-Ed kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed

Oct 31 20:05:18 Mac-Pro-van-Ed kernel[0]: FireWire GUID ffffffffffffffff is invalid!

Oct 31 20:05:23: --- last message repeated 1 time ---

Oct 31 20:05:23 Mac-Pro-van-Ed kernel[0]: Graphics suppressed 10171 ms

Oct 31 20:05:27 Mac-Pro-van-Ed kernel[0]: 0 0 AppleUSBCDC: start - initDevice failed

Oct 31 20:05:28: --- last message repeated 1 time ---

Oct 31 20:05:28 Mac-Pro-van-Ed kernel[0]: HID tickle 14266 ms

Oct 31 20:05:28 Mac-Pro-van-Ed kernel[0]: FireWire GUID ffffffffffffffff is invalid!

 

It seems that when I hit my keyboard it wakes with HDEF EHC1???? HDEF is Audio!

Also Firewire seems to have problem..

Any ideas?

 

Ed

 

Ha Ed,

 

welke model heb je geselecteerd (imac macpro)

 

Groet,

RW

Link to comment
Share on other sites

Ha Ed,

 

welke model heb je geselecteerd (imac macpro)

 

Groet,

RW

 

Ik heb MacPro 3.1 omdat ik anders erg slechte OpenGL heb.

Ik zou eigenlijk iMac 12,2 moeten hebben maar dat maakt voor dit probleem niet uit.

 

Ed

 

Hi Edkroket,

 

Perhaps you could try disabling the USB Storage Function? I did that and it fixed some USB 3.0 connectivity issues I had. Also, could you tell me how you edited your DSDT to enable native SATA ports? I have a Z68XP-UD4 rev1. Thanks

 

Haven't tried that but give it a try tonight!

I added this under SATA Device;

Method (_DSM, 4, NotSerialized)

{

Store (Package (0x02)

{

"device-id",

Buffer (0x04)

{

0x81, 0x26, 0x00, 0x00

}

}, Local0)

DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

Return (Local0)

}

 

So it looks like this;

Device (SATA)

{

Name (_ADR, 0x001F0002)

OperationRegion (PCI, PCI_Config, 0x40, 0x20)

Field (PCI, DWordAcc, NoLock, Preserve)

{

ITM0, 16,

ITM1, 16,

SIT0, 4,

SIT1, 4,

Offset (0x08),

UDC0, 2,

UDC1, 2,

Offset (0x0A),

UDT0, 8,

UDT1, 8,

Offset (0x14),

ICF0, 2,

ICF1, 2,

, 6,

WPPE, 1,

, 1,

FAS0, 2,

FAS1, 2

}

 

Method (_DSM, 4, NotSerialized)

{

Store (Package (0x02)

{

"device-id",

Buffer (0x04)

{

0x81, 0x26, 0x00, 0x00

}

}, Local0)

DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

Return (Local0)

}

 

 

Ed

Link to comment
Share on other sites

Ik heb MacPro 3.1 omdat ik anders erg slechte OpenGL heb.

Ik zou eigenlijk iMac 12,2 moeten hebben maar dat maakt voor dit probleem niet uit.

 

Ed

 

Ha Ed,

 

Het moet er in ieder geval qua devices zo uitzien!

Post ook even zo'n image. is wel belangrijk dat je imac12.2 kiest.

Update even je signature zodat we al de hardware info hebben.

 

RW

post-663166-1320880159_thumb.png

post-663166-1320880168_thumb.png

Link to comment
Share on other sites

Ha Ed,

 

Het moet er in ieder geval qua devices zo uitzien!

Post ook even zo'n image. is wel belangrijk dat je imac12.2 kiest.

Update even je signature zodat we al de hardware info hebben.

 

RW

 

Ik heb een Z68XP-UD3P en heb na sleep/wake ook een usb probleem alsmede een firewire probleem.

Weet ook niet wat het is.

USB toetsenbod en muis worden niet herkend en firewire geluid ook niet.

Iemand een idee?

 

Heb powersavings enzo allemaal aan staan.

 

Cheers,

M

Link to comment
Share on other sites

Ik heb een Z68XP-UD3P en heb na sleep/wake ook een usb probleem alsmede een firewire probleem.

Weet ook niet wat het is.

USB toetsenbod en muis worden niet herkend en firewire geluid ook niet.

Iemand een idee?

 

Heb powersavings enzo allemaal aan staan.

 

Cheers,

M

 

Hee M,

 

Wat ik nu doe als ie slaapt is met de aan/uit knop 2x wakker maken. Dan even usb kabeltje erui en er weer in en dan doet alles het weer. Geluid via Firewire heb ik niet. Alleen schijven.

 

Misschien heb je er wat aan. Welke bios versie gebruik je?

 

Ed

Link to comment
Share on other sites

Ha Ed,

 

Het moet er in ieder geval qua devices zo uitzien!

Post ook even zo'n image. is wel belangrijk dat je imac12.2 kiest.

Update even je signature zodat we al de hardware info hebben.

 

RW

 

Hier mijn plaatjes met MacPro 3.1

post-365967-1321112398_thumb.pngpost-365967-1321112422_thumb.pngpost-365967-1321112485_thumb.png

 

Ed

Link to comment
Share on other sites

  • 1 month later...

So did you fix it? I don't speak Dutch, but it looked like you solved the problem :\.

Well I sort of fixed it. I'll let you know how and what I did when I am at home. Later tonight!

 

 

Ed

Link to comment
Share on other sites

So did you fix it? I don't speak Dutch, but it looked like you solved the problem :\.

 

So here is what I did.

running Bios F6. but now I think that F8 will work the same...

in Bios;

MIT/Advanced Freq...../Advanced CPU Core....;

Intel Turbo Boost-enabled

Multitreading-enabled

C3/C6 State-disabled

The rest on auto

 

Advanced Bios Features

Quick Boot-enabled

 

Integrated Peripherals

1394-disabled

R_USB3.0 Control-enabled

F_USB3.0 Control-enabled

OROM UI and Banner-disabled

GSATA3 Controller-disabled

Onboard Serial-disabled

 

I put machine to sleep with either the power button or via Applemenu-sleep

To wake I use power button again, wait a few seconds and press a key on my keyboard and it's wake and I can use mouse and keyboard.

Hope this will help you!

 

Ed

Link to comment
Share on other sites

So here is what I did. running Bios F6. but now I think that F8 will work the same... in Bios; MIT/Advanced Freq...../Advanced CPU Core....; Intel Turbo Boost-enabled Multitreading-enabled C3/C6 State-disabled The rest on auto Advanced Bios Features Quick Boot-enabled Integrated Peripherals 1394-disabled R_USB3.0 Control-enabled F_USB3.0 Control-enabled OROM UI and Banner-disabled GSATA3 Controller-disabled Onboard Serial-disabled I put machine to sleep with either the power button or via Applemenu-sleep To wake I use power button again, wait a few seconds and press a key on my keyboard and it's wake and I can use mouse and keyboard. Hope this will help you! Ed

 

Thank you for reply.

 

So your USB devices are still being reconnected after wake up? Are you getting any errors on console like:

 

kernel: USBF: 395.920 [0xffffff8015543000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying.

 

kernel: 0 0 AppleUSBCDC: start - initDevice failed

Link to comment
Share on other sites

Yes my USB device are still being reconnected after wake. And yes there are some errors in console but they work just fine.

kernel: USBF: 395.920 [0xffffff8015543000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying.

And this one I don't have

kernel: 0 0 AppleUSBCDC: start - initDevice failed

This one I also get.

But still all is working!

 

And also I updated Bios to F8 and everything is working the same so with problems the same behavior as with F6

 

Ed

Link to comment
Share on other sites

 Share

×
×
  • Create New...