tarmer Posted October 11, 2011 Share Posted October 11, 2011 All... Got Leopard up and running, It boots brings up the desktop and I can even mess around for a while but it suddenly (after different random events) send a Voodoo kernel panic message across the screen I can post this if it will help - any thoughts ? (SYSTEM OUTLINE) Microprocessor Intel® Pentium® 4 Memory Dual-channel DDR 333 and DDR 400 SDRAM ECC or non-ECC NOTE: DDR 333 operates at 320 MHz when used with a Pentium 4 with an 800 MHz front-side bus. BIOS address F0000h Computer Information Chip set Intel 875P Data bus width 64 bits Address bus width 32 bits DMA channels 8 Interrupt levels 24 BIOS chip 4-Mb Memory speed 333 MHz / 400 MHz DDR NOTE: DDR 333 operates at 320 MHz when used with a Pentium 4 with an 800 MHz front-side bus LOM Gigabit network interface Capable of 10/100/1000 communication Controllers Serial ATA: dual-serial ATA channels, supporting 1 device per channel IDE/ATA: 100 - dual-channel, suppporting 2 devices per channel Optional add-in U320 SCSI FSB clock 800- or 533-MHz data rate Video Type AGP 8x (AGP 3.0; 1.5 V) NVIDIA Quad FX 500/600 Expansion Bus Bus type 4 PCI 2.2 (3.3 V/5.0 V) Bus speed PCI: 33 MHz Expansion-card connectors: Four PCI slots (32-bit 33 MHz), and one AGP 8x Link to comment Share on other sites More sharing options...
amateur_osx86 Posted October 17, 2011 Share Posted October 17, 2011 What distro did u use ? iatkos, ideneb kalway? which one? and the selected options during install.... Link to comment Share on other sites More sharing options...
Recommended Posts