langerik Posted August 29, 2011 Share Posted August 29, 2011 Hardware: Intel cor i5 2410m Nvidia 520m(wich can be turned off in bios) and intel hd300 Main board acer JE50_HR intel HM65 southbridge 4gb ddr3 ram Realtek HD audio with ALC271X codec Lan: Broadcom netlink Gigabith Ethernet Wi-fi: Broadcom 802.11n BCM43XX Cardreader: Broadcom SD host controller (low priority) Webcam: Acer Crystal Eye Webcam (low priority) here is what i've got so far Chameleon: every way Boot:0 error (known problem fixable by copying in single-user mode) when booting from cd it hangs after pushing button or waiting install method commands outcome Myhack 10.7 Generic /extra -v -x Bootable but only with –v and -x Myhack 10.6 Generic /extra everything like –v –x GrapicsEnabler=Yes BusRatio=23 520m on and of reboots before getting to kernel Hazard distro -v Cpu backtrace/kext error [url="http://dl.dropbox.com/u/7965497/sites%20lang%20laten%20staan/DSC04661.JPG"]backtrace error hazard[/url] i hope there are more guys with this laptop or much knowledge that can help to get it working. or am i just doing something wrong? Link to comment Share on other sites More sharing options...
Shane369 Posted September 11, 2011 Share Posted September 11, 2011 Did you ever get anywhere with this?? I was just looking at the same laptop and it seemed to be perfect! Link to comment Share on other sites More sharing options...
langerik Posted September 12, 2011 Author Share Posted September 12, 2011 Did you ever get anywhere with this?? I was just looking at the same laptop and it seemed to be perfect! sadly enough i have to say it isn't the right one if you want to get it and then install it. if you wan't to play with it (and help me ) i can't tell if it will ever make it, but i want to make this happen. atm we have myhack 10.7 booting with -x -v and retail with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy booting but kernal panic when upgrading to 10.6.8. i want to try kakewalk soon. so if you want a good working one i heard asus k73's have high compatibility Link to comment Share on other sites More sharing options...
Shane369 Posted September 12, 2011 Share Posted September 12, 2011 sadly enough i have to say it isn't the right one if you want to get it and then install it. if you wan't to play with it (and help me ) i can't tell if it will ever make it, but i want to make this happen. atm we have myhack 10.7 booting with -x -v and retail with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] legacy booting but kernal panic when upgrading to 10.6.8. i want to try kakewalk soon. so if you want a good working one i heard asus k73's have high compatibility Any chance you can post or message me a break down of what components it uses?? From what I've found on it so far it seems to be perfect. But, sounds like itd keep me busy though!! Link to comment Share on other sites More sharing options...
langerik Posted September 13, 2011 Author Share Posted September 13, 2011 Any chance you can post or message me a break down of what components it uses?? From what I've found on it so far it seems to be perfect. But, sounds like itd keep me busy though!! i´ve got: i5 2410m nvidia gt 520m(can be turned off in bios) intel hd graphics (i think hd300) 4gb ddr3 memory mainboard: acer JE50_HR chipset intel sandybridge southbridge: HM65 broadcom netlink gigabit ethernet broadcom BCM43XX 500gb harddidsk Link to comment Share on other sites More sharing options...
atzon Posted September 13, 2011 Share Posted September 13, 2011 I just installed Lion on my Aspire 5750g. Unfortunately the following components don´t work Touchpad WLAN LAN Sound Maybe there is someone out there who can help me? Don´t know which kexts i need. Link to comment Share on other sites More sharing options...
langerik Posted September 14, 2011 Author Share Posted September 14, 2011 I just installed Lion on my Aspire 5750g.Unfortunately the following components don´t work Touchpad WLAN LAN Sound Maybe there is someone out there who can help me? Don´t know which kexts i need. are you booting with -x? because safe mode doesn't load voodoo ps2, if you aren't install voodoo ps2 with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. for the rest search your devices on google and kexts.com I just installed Lion on my Aspire 5750g.Unfortunately the following components don´t work Touchpad WLAN LAN Sound Maybe there is someone out there who can help me? Don´t know which kexts i need. are you booting with -x? because safe mode doesn't load voodoo ps2, if you aren't install voodoo ps2 with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. for the rest search your devices on google and kexts.com Link to comment Share on other sites More sharing options...
atzon Posted September 14, 2011 Share Posted September 14, 2011 i dont boot with -x Link to comment Share on other sites More sharing options...
langerik Posted September 14, 2011 Author Share Posted September 14, 2011 i dont boot with -x then first try to install voodoo ps2 with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. may i ask you how you've got so far Link to comment Share on other sites More sharing options...
Recommended Posts