MrMaxP Posted August 12, 2011 Share Posted August 12, 2011 Hi all, I'm having problems getting 4 monitors working on dual 8800GTX cards. My previous Snow install on my old machine using the same cards worked great. However it's been over a year since I got that working and have not recollection of how I achieved it! Currently I have 2 monitors working with full acceleration (or so it seems) at full res. In the System Report under Graphics / Displays I have both cards listed with the same details, however one shows info on the connected displays and the other doesn't. The displays are connected and working as I run dual boot to Win 7 which uses all 4. To get this far I used this tutorial http://aquamac.proboards.com/index.cgi?boa...&thread=569 The only difference being I got my PCI addresses from windows rather than using the card swapping technique described here. I've remembered to remove the NVInject and other kexts listed and i've set GraphicsEnabler to "No" in the com.apple.Boot.plist. Any help would be very much appreciated. Thanks, Max Gigabyte z68x-ud7-b3 (F8 bios) i7 2600K @3.8ghz 16GB (4x4GB) Corsair DDR3 @1600 2xNVidia 8800 GTX 60gb SSD SATA (Lion boot) 120gb SSD SATA2 (Windows 7) 1TB Samsung SATA (Data) Link to comment Share on other sites More sharing options...
Recommended Posts