Jump to content

Configuración Basica Bios. Hackintosh basic bios configuration.

- - - - -

  • Please log in to reply
1 reply to this topic

#1
Derty

Derty

    InsanelyMacaholic

  • Donators
  • 3,165 posts
  • Gender:Male
lo encontre en un post ruso hace unos días.

esta bien saberlo.

Standard CMOS Features: Date: [set]
Time: [set]
Drive A: [None]
Floppy 3 Mode Support: [Disabled]
Halt On: [No Errors]
Advanced BIOS Features:
Hard Disk boot Priority: [set your boot drive as #1]
First Boot Device: [Hard Disk]
Second Boot Device: [CDROM]
Third Boot Device: [Disabled]
Boot Up Floppy Seek: [Disabled]
Boot Up Num-Lock: [On]
Password Check: [setup if desired]
HDD S.M.A.R.T. Capability: [Enabled]
Limit CPUID Max. to 3: [Disabled]
No-Execute Memory Protect: [Enabled]
Delay for HDD (Secs): [0]
Full Screen LOGO Show: [Disabled]
Init Display First: [PEG]
Integrated Peripherals:
SATA RAID/AHCI Mode: [AHCI]
SATA Port0-3 Native mode: [Enabled]
USB Controller: [Enabled]
USB 2.0 Controller: [Enabled]
USB Keyboard Function: [Enabled]
USB Mouse Function: [Enabled]
USB Storage Function: [Enabled]
Azalia Codec: [Enabled] * Disable this if you are using a separate sound card Onboard
H/W 1394: [Enabled]
Onboard H/W LAN1: [Enabled] * Disable this if you are using a separate network card Onboard
H/W LAN2: [Disabled] * You can enable this if you want to use both NICs
Green LAN: [Disabled]
SMART LAN1: [Press Enter]
SMART LAN2: [Press Enter]
Onboard LAN1 Boot ROM: [Disabled]
Onboard LAN2 Boot ROM: [Disabled]
Onboard SATA/IDE Device: [Enabled]
Onboard SATA/IDE Ctrl Mode: [AHCI]
Smart Backup: [Disabled]
Power Management Setup: ACPI Suspend Type: [S3(STR)]
USB Device Wake-Up From S3: [Enabled]
Soft-Off by PWR-BTTN: [Instant-Off]
PME Event Wake Up: [Disabled]
Power On by Ring: [Disabled]
Resume by Alarm: [Disabled]
HPET Support: [Enabled]
HPET Mode: [64-bit mode]
Power On By Mouse: [Disabled]
Power On By Keyboard: [Disabled]
AC Back Function: [Soft-Off]


#2
jpa

jpa

    InsanelyMac Legend

  • Members
  • PipPipPipPipPipPipPip
  • 516 posts
  • Gender:Male
yo tengo este

1. Start by using Load Optimized Defaults.

2. In M.I.T. Advanced Memory Settings:
Exteme Memory Profile(X.M.P.) -> Profile1
Performance Enhance -> Standard

3. In M.I.T. Advanced Frequency Settings:
Under Advanced CPU Core Features:
Intel® Turbo Boot Tech. -> Enabled
CPU Enhanced Halt (C1E) -> Enabled
C3/C6/C7 State Support -> Enabled
CPU Thermal Monitor -> Enabled
CPU EIST Function -> Enabled
Bi-Directional PROCHOT -> Enabled

4. In Integrated Peripherals
ICH SATA Control Mode -> AHCI
SATA Port0-3 Native Mode -> Enabled
eSATA Ctrl Mode -> AHCI
GSATA 6_7/IDE Ctrl Mode -> AHCI
GSATA 8_9/IDE Ctrl Mode -> AHCI

5. In Power Management:
HPET Mode -> 64-bit mode

6. In Advanced BIOS Features:
Quick Boot -> Enabled
Third Boot Device Floppy -> Disabled
HDD S.M.A.R.T. Capability -> Enabled
Full Screen LOGO Show -> Disabled
Init Display First PCI -> PCIE x16-1

7. In Integrated Peripherals:
GSATA 6_7/IDE Controller -> Disabled
GSATA 8_9/IDE Controller -> Disabled

8. In Power Management:
Soft-Off by PWR-BTTN -> Delay 4 Sec.

9. In PC Health Status:
CPU Warning Temperature -> 60C/140F
CPU FAN Fail Warning -> Enabled





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

© 2014 InsanelyMac  |   News  |   Forum  |   Downloads  |   OSx86 Wiki  |   Mac Netbook  |   PHP hosting by CatN  |   Designed by Ed Gain  |   Logo by irfan  |   Privacy Policy